Determination of isoniazid and hydrazine by capillary electrophoresis with amperometric detection at a Pt-particle modified carbon fiber microelectrode

Capillary electrpphoresis (CE)/electrochemical detection (EC) for the simultane-ous determination of hydrazine and isoniazid has been developed.The electrochemical method uses a novel modified electrode dispersed with ultrafine platinum particles on the surface of a 30μm carbon fiber microelectrode.The unique characteristic of the Pt-particles modified carbon fiber microelectrode is its excellent stability.The current measurement for hydrazine is more sensitive than that of isoniazid.Selective determination of trace amount of free hydrazine in isoniazid and its formulation can be achieved at applied potential of 0.5V.     

Study of distribution of elements in the depth of V?P?Co catalyst grain

It has been shown that addition of cobalt to a vanadium-phosphorus oxide catalyst increases the P/V molar ratio on the surface, the surface acidity and the selectivity of butane oxidation. It has been established that in the V–P–Co–O catalyst the probability of the removal of phosphorus from the surface is markedly reduced.

---

, , . , V–P–Co–O .

     

Rearrangement of fine particles in porous media causing reduction of permeability and formation of preferred pathways of flow: Experimental findings and a conceptual model

The rearrangement of matrix configuration due to the redistribution of clay particles was studied by introducing different suspensions into porous media. Clay (kaolinite) with low CEC (cation exchange capacity) and small flocs of high CEC clay (smectite) accumulated in regions of slow flow. In some experiments this was followed by rapid accumulation in regions of high velocity, impairing flow to a considerable degree. Clay with high CEC formed more voluminous structures which could bridge over a passage and impair the flow.In either case, whether small or large units of clay are involved, the final flow occurred mainly through open, preferred pathways. Such processes of redistribution and appearance of flow pathways may occur in subsurface porous media aquifers where forced gradients exist (e.g. in aquifers near the perforation of pumping wells and in places where large quantity of water are naturally or artificially recharged and in producing gas and oil fields).     

Investigating the vortex melting phenomenon in BSCCO crystals using magneto-optical imaging technique

Using a novel differential magneto-optical imaging technique we investigate the phenomenon of vortex lattice melting in crystals of Bi₂Sr₂CaCu₂O₈ (BSCCO). The images of melting reveal complex patterns in the formation and evolution of the vortex solid-liquid interface with varying field (H)/temperature (T). We believe that the complex melting patterns are due to a random distribution of material disorder/inhomogeneities across the sample, which create fluctuations in the local melting temperature or field value. To study the fluctuations in the local melting temperature/field, we have constructed maps of the melting landscape T _m(H, r), viz., the melting temperature (T _m) at a given location (r) in the sample at a given field (H). A study of these melting landscapes reveals an unexpected feature: the melting landscape is not fixed, but changes rather dramatically with varying field and temperature along the melting line. It is concluded that the changes in both the scale and shape of the landscape result from the competing contributions of different types of quenched disorder which have opposite effects on the local melting transition.     

Multibeam X-ray lithography to form deep regular microstructures

A method for the fabrication of regular microstructures with a high aspect ratio (for example, X-ray gratings) by direct multibeam vector recording in layers of an SU-8 resist is presented. An X-ray beam with a wavelength from 0.4 to 1.7 Å is used for recording. The features of the method are described. The fabricated samples of regular microstructures of the SU-8 resist and gold-plated X-ray masks are presented as finished products.     

Structuring of photosensitive material below diffraction limit using far field irradiation

In this paper, we report on in-situ atomic force microscopy (AFM) studies of topographical changes in azobenzene-containing photosensitive polymer films that are irradiated with light interference patterns. We have developed an experimental setup consisting of an AFM combined with two-beam interferometry that permits us to switch between different polarization states of the two interfering beams while scanning the illuminated area of the polymer film, acquiring corresponding changes in topography in-situ. This way, we are able to analyze how the change in topography is related to the variation of the electrical field vector within the interference pattern. It is for the first time that with a rather simple experimental approach a rigorous assignment can be achieved. By performing in-situ measurements we found that for a certain polarization combination of two interfering beams [namely for the SP (?, ?) polarization pattern] the topography forms surface relief grating with only half the period of the interference patterns. Exploiting this phenomenon we are able to fabricate surface relief structures with characteristic features measuring only 140 nm, by using far field optics with a wavelength of 491 nm. We believe that this relatively simple method could be extremely valuable to, for instance, produce structural features below the diffraction limit at high-throughput, and this could significantly contribute to the search of new fabrication strategies in electronics and photonics industry.     

Diffusion-weighted MRI in prostate cancer -- comparison between single-shot fast spin echo and echo planar imaging sequences

Diffusion-weighted (DW) MRI at 1.5 T was carried out in two groups of patients. MRI data were correlated with the biopsy and histopathology (where available). The performance of two sequences -- a single-shot FSE (14 patients) and a single-shot EPI (15 patients) -- was compared. Average ADC values from the normal peripheral zone (PZ), central gland (CG) and the tumour [prostate carcinoma (PCa)] were calculated from b values of 0 and 600. Tukey-Kramer test was used for statistical analysis. EPI produced higher values of ADC (10(-3) mm(2)/s) than FSE sequence: 1.992+/-0.208 vs. 1.573+/-0.270 in PZ (P<.001), 1.518+/-0.126 vs. 1.373+/-0.179 in CG and 1.214+/-0.254 vs. 0.993+/-0.158 in PCa (P<.01). In conclusion, both EPI and FSE sequences showed differences in ADC between normal PZ, CG and PCa; however, EPI produced significantly higher ADC values than FSE.     

Fabrication of quasi-optical selective elements for the terahertz range in the form of pseudometallic structures via deep X-ray lithography

A technique for fabricating self-bearing pseudometallic structures, which hold promise for utilization as quasi-optical frequency-selective elements in the terahertz range of the electromagnetic spectrum, is discussed. The technique is based on microstructuring a continuous dielectric layer via stencilled X-ray lithography involving synchrotron radiation with subsequent metallization of the entire structure surface. The main manufacturing schemes are described, including fabrication of the initial substrates and X-ray masks. Examples of samples of the produced selective elements, such as frequency filters and flat lenses, as well as their operating characteristics, are presented.