Physical Properties and Erosion Behavior of Poly(trimethylene carbonate‐co‐ε‐caprolactone) Networks

Form‐stable resorbable networks are prepared by gamma irradiating trimethylene carbonate (TMC)‐ and ε‐caprolactone (CL)‐based (co)polymer films. To evaluate their suitability for biomedical applications, their physical properties and erosion behavior are investigated. Homopolymer and copolymer networks that are amorphous at room temperature are flexible and rubbery with elastic moduli ranging from 1.8 ± 0.3 to 5.2 ± 0.4 MPa and permanent set values as low as 0.9% strain. The elastic moduli of the semicrystalline networks are higher and range from 61 ± 3 to 484 ± 34 MPa. The erosion behavior of (co)polymer networks is investigated in vitro using macrophage cultures, and in vivo by subcutaneous implantation in rats. In macrophage cultures, as well as upon implantation, a surface erosion process is observed for the amorphous (co)polymer networks, while an abrupt decrease in the rate and a change in the nature of the erosion process are observed with increasing crystallinity. These resorbable and form‐stable networks with tuneable properties may find application in a broad range of biomedical applications.

     

At-line bioprocess monitoring by immunoassay with rotationally controlled serial siphoning and integrated supercritical angle fluorescence optics

In this paper we report a centrifugal microfluidic “lab-on-a-disc” system for at-line monitoring of human immunoglobulin G (hIgG) in a typical bioprocess environment. The novelty of this device is the combination of a heterogeneous sandwich immunoassay on a serial siphon-enabled microfluidic disc with automated sequential reagent delivery and surface-confined supercritical angle fluorescence (SAF)-based detection. The device, which is compact, easy-to-use and inexpensive, enables rapid detection of hIgG from a bioprocess sample. This was achieved with, an injection moulded SAF lens that was functionalized with aminopropyltriethoxysilane (APTES) using plasma enhanced chemical vapour deposition (PECVD) for the immobilization of protein A, and a hybrid integration with a microfluidic disc substrate. Advanced flow control, including the time-sequenced release of on-board liquid reagents, was implemented by serial siphoning with ancillary capillary stops. The concentration of surfactant in each assay reagent was optimized to ensure proper functioning of the siphon-based flow control. The entire automated microfluidic assay process is completed in less than 30 min. The developed prototype system was used to accurately measure industrial bioprocess samples that contained 10 mg mL⁻¹ of hIgG.     

Substitution pattern and stereochemistry versus liquid crystalline behaviour [1]

Abstract

Selectively O-alkylated inositols of myo-, scyllo- and chiro-configuration allow detailed studies of the relationship between the substitution pattern in the cyclohexane ring and the liquid crystalline properties observed to be made for these mainly novel cyclic compounds containing hydroxyl functions. The types of thermotropic mesophase formed and containing hydrogen bonds are strongly influenced by the number and the stereochemical arrangement of both the hydroxyl groups and the alkyloxy chains, as well as by their positions on the cyclohexane ring.

The mesophases of the various new inositol ethers have been studied by polarizing optical microscopy and differential scanning calorimetry, and are discussed here in comparison with known systems, as a function of the above mentioned structural factors.     

Dielectric studies of two liquid crystalline benzoates with coupled and decoupled CN groups

The results of dielectric studies performed in a broad frequency range for two compounds, 4-cyanophenyl 4-n-heptylbenzoate (7BBCN) and 4-(4-cyanobutyloxy)phenyl 4- n-heptylbenzoate (7BB4CN), are compared. They have the same molecular core whereas the strongly polar CN group is attached to the benzene ring in 7BBCN or is separated from it by the butyloxy chain in 7BB4CN. 7BBCN has a nematic phase, whereas 7BB4CN exhibits a monotropic nematic and smectic A₂ polymorphism. Large differences in the dielectric properties of the two substances were found. The analysis of the results led to the conclusion that the antiparallel dipole-dipole associations are considerably stronger in the substance with a decoupled CN group.     

A New Procedure for Highly Regio‐ and Stereoselective Iodoacetoxylation of Protected Glycals and α‐1,2‐Cyclopropanated Sugars

Protected glycals and α‐1,2‐cyclopropanated sugars were converted in high yields and selectivities in less than 2 h at low temperatures to 2‐deoxy‐2‐iodoglycosyl acetates or novel 2‐deoxy‐2‐iodomethylglycosyl acetates using the simple, inexpensive reagent mixture of ammonium iodide, hydrogen peroxide, and acetic anhydride/acetic acid in acetonitrile. The protected glycals gave rise to 2‐deoxy‐2‐bromoglycosyl acetates when ammonium bromide was used instead of the iodide, although longer reaction times were required and selectivities were inferior. Other simple olefins such as styrene and indene were also converted to their corresponding 1,2‐trans‐iodoacetates.     

Assembling a Phthalocyanine and Perylenediimide Donor–Acceptor Hybrid through a Platinum(II) Diacetylide Linker

In a novel electron‐donor–acceptor conjugate, phthalocyanine (Pc) and perylenediimide (PDI) are connected through a trans‐platinum(II) diacetylide linker to yield Pc‐Pt‐PDI 1 . In the ground state, the presence of Pt^II disrupts the electronic communication between the two electroactive components, as revealed by UV/Vis spectroscopy and electrochemical studies. The photophysical behavior of 1 is compared with that of the corresponding Pc‐PDI electron‐donor–acceptor conjugate 2 in terms of charge separation and charge recombination. The insertion of Pt^II between Pc and PDI impacts the results in a longer‐lived Pc ^{. +}/PDI ^{. ?} radical ion‐pair state. In addition, the intermediately formed Pc triplet excited state is formed with higher quantum yields in 1 than in 2 .     

Photoswitchable Hydrogel Surface Topographies by Polymerisation‐Induced Diffusion

Herein, we describe the preparation of patterned photoresponsive hydrogels by using a facile method. This polymer‐network hydrogel coating consists of N‐isopropylacrylamide (NIPAAM), cross‐linking agent tripropylene glycol diacrylate (TPGDA), and a new photochromic spiropyran monoacrylate. In a pre‐study, a linear NIPAAM copolymer (without TPGDA) that contained the spiropyran dye was synthesised, which showed relatively fast photoswitching behaviour. Subsequently, the photopolymerisation of a similar monomer mixture that included TPGDA afforded freestanding hydrogel polymer networks. The light‐induced isomerisation of protonated merocyanine into neutral spiropyran under slightly acidic conditions resulted in macroscopic changes in the hydrophilicity of the entire polymer film, that is, shrinkage of the hydrogel. The degree of shrinkage could be controlled by changing the chemical composition of the acrylate mixture. After these pre‐studies, a hydrogel film with spatially modulated cross‐link density was fabricated through polymerisation‐induced diffusion, by using a patterned photomask. The resulting smooth patterned hydrogel coating swelled in slightly acidic media and the swelling was higher in the regions with lower cross‐linking densities, thus yielding a corrugated surface. Upon exposure to visible light, the surface topography flattened again, thus showing that a hydrogel coating could be created, the topography of which could be controlled by light irradiation.     

A Convenient and Selective Palladium‐Catalyzed Aerobic Oxidation of Alcohols

An efficient procedure for the oxidation of primary and secondary alcohols to aldehydes and ketones, respectively, with molecular oxygen under ambient conditions has been achieved. By applying catalytic amounts of Pd(OAc)₂ in the presence of tertiary phosphine oxides (O?PR₃) as ligands, a variety of substrates are selectively oxidized without formation of ester byproducts. Spectroscopic investigations and DFT calculations suggest stabilization of the active palladium(II) catalyst by phosphine oxide ligands.