SOLVENT EFFECTS ON THE TAUTOMERIZATION OF 5′-DEOXYPYRIDOXAL. A PHOTOPHYSICAL STUDY

Abstract— Absorption and fluorescence spectra of 5′-deoxypyridoxal (DPL) in various pure solvents and mixtures were recorded both at room temperature and over the range10–65°C. The areas under the absorption bands were analyzed to obtain the mole fraction (f_N, f_z) of two tautomers (the zwitterionic, Z, and neutral, N, forms) in the ground state. The following spectral parameters were determined from the fluorescence spectra: Stokes shift (Δv), fluorescence quantum yield of the neutral form (Q_N), fluorescence ratio of the neutral to the zwitterionic form (ø_N/ø_Z) and the rate constant of tautomerization (k₁) from Z to N in the excited state. Some of these parameters (f_N, Δv, Q_N, k₁) were found to depend on the proton donor character of the solvent, whereas others (ø_N/ø_Z) depended on its dipole moment. Thus, the absorption and fluorescence spectra of DPL allow one to obtain information on the polarity and the concentration of –OH groups on its environment.     

5-vinylisoxazole

Cycloaddition of fulminic acid to 1-butyn-3-ol gave a mixture of 5-α-hydroxyethylisoxazole (I) and 4-α-hydroxyethylisoxazole (II) in the ratio 9:1. By the dehydration of 1, 5-vinylisoxazole (III) was obtained. Compound III has also been prepared by cyclization of 4-penten-2-ynal as well as its diethylacetal with hydroxylamine hydrochloride; in both instances no isomers have been obtained. Compound III spontaneously polymerizes even at room temperature yielding a polymer still containing isoxazole rings.     

A Screening Method for Polycyclic Aromatic Hydrocarbons Determination in Water by Headspace SPME with GC-FID

A simple method for determination of polycyclic aromatic hydrocarbons (PAHs) in water using headspace solid-phase microextraction (HS-SPME) with gas chromatography-flame ionisation detector (GC-FID) was developed. In order to obtain the convenient experimental conditions for HS-SPME extraction an experimental design with two steps was accomplished. A 2^6-2 fractional factorial design and central composite design (CCD) considering three significant factors were used. Naphthalene, anthracene and fluoranthene were chosen as representatives of two, three and four aromatic rings, and the global response of three PAHs was used for the results, evaluation. The chosen extraction conditions were: 85 μm polyacrylate fibre; 50 °C temperature; 60 min time; 20 mL-dissolution volume (in 40 mL glass vial); without salt addition; and 2 min desorption time. The procedure was extended to other seven PAHs (acenaphthylene, acenaphthene, fluorene, phenanthrene, pyrene, chrysene and benzo(a)anthracene) and the analytical characteristics were checked. The limit of detection (LOD) was from 0.08 (anthracene) to 0.20 μg L^?1 (naphthalene). The precision expressed as relative standard deviation (RSD in %) using 50 μg L^?1 of each analyte ranged from 6.8 to 17 %. The method was applied to the analysis of the surface waters and leaching waters of contaminated soils from Gipuzkoa (North Spain). The PAHs were not detected in surface water samples. Most of the PAHs were found in the leachates from contaminated soils showing a maximum global value of 75.5 μg L^?1.     

On hydrogen activation in the hydroformylation of olefins with Rh4(CO)12 or Co2(CO)8 as catalyst precursors

In the hydroformylation of ethylene with approximately equimolar H₂/D₂ mixtures and Rh₄(CO)₁₂ or Co₂(CO)₈ as the catalyst precursor about 50% of propionaldehyde-d₁ was formed. The propionaldehyde-d₀/d₂ ratio was ～ 3 for rhodium and ～ 2.6 for the cobalt catalyst. On the basis of the results and assuming that there is no rapid M(H)₂/M(D)₂ scrambling, activation of hydrogen through M(H)₂ or M(H)₂(olefin) complexes can be excluded.     

Transport efficiency in femtosecond laser ablation inductively coupled plasma mass spectrometry applying ablation cells with short and long washout times

Relative mass transport efficiencies of near infrared (λ = 795 nm) femtosecond laser generated brass aerosols in helium were measured by ICP-MS applying different ablation cells with short and long washout times. It was found that the transport efficiencies are independent of the cell used within the mutual experimental uncertainties. This finding was confirmed by additional measurements providing the absolute particle mass transport efficiencies of femtosecond laser ablation in He. Here, the transport efficiencies were determined by weighing the samples before and after ablation with a micro-balance, collecting the particles by low-pressure impaction, and evaluating the impacted masses quantitatively by total reflection X-ray fluorescence. Within the experimental uncertainties (± 9–19%) the same absolute transport efficiency (about 77%) was found for all cells applied. This efficiency value can be regarded as a lower limit of the absolute mass transport efficiency since mass losses in the impactor are difficult to quantify.     

New aspects of the electroadsorption of ethyl xanthate on copper electrodes

The interaction of the ethyl xanthate (EX) anion with a copper electrode in a borate buffer solution, pH 9.2, has been investigated by cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM), electrochemical impedance spectroscopy (EIS), and measurements of contact angle (CA) under controlled potential. The results obtained allow establishing that, in the potential range from -0.80 and -0.60 V, two parallel reactions were characterized. These reactions were the ethyl xanthate electroadsorption and the hydrogen evolution reaction (HER). This last reaction has not been described by previous authors. Besides, the EIS measurements show that the mechanism of the HER on copper electrodes is not affected by the presence of a ethyl xanthate species. The EQCM study shows that in the electrodesorption process the departure of each ethyl xanthate species from the copper electrode is accompanied with the simultaneous entry of four to five water molecules. This fact is in accordance with the number of copper atoms involved in the adsorption of one ethyl xanthate species.     

Hexaruthenium carbonyl cluster complexes with basal edge-bridged square pyramidal metallic skeleton: efficient synthesis of 2-imidopyridine derivatives and determination of their reactive sites in carbonyl substitution reactions

The reactions of [Ru(3)(CO)(12)] with half equivalent of 2-amino-6-methylpyridine (H(2)ampy) or 2-aminopyridine (H(2)apy) in refluxing xylene give the hexanuclear products [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-L)(mu-CO)(2)(CO)(14)] (L = ampy, 1; apy, 2). These reactions represent the first high-yield syntheses of hexanuclear complexes with a basal edge-bridged square pyramidal metallic skeleton. Five metal atoms of these complexes are bridged by the N-donor ligand in such a way that the edge-bridging metal atom is attached to the pyridine nitrogen, while the basal atoms of the square pyramid are capped by an imido fragment that arises from the activation of both N-H bonds of the NH(2) group. The reactive sites of these complexes in CO substitution reactions have been determined by studying the reactivity of 1 with triphenylphosphine. Two kinetically controlled monosubstitutions take place on the edge-bridging metal atom in positions cis to the pyridine nitrogen, leading to a mixture of two isomers of formula [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(13)(PPh(3))] (3 and 4). On heating at 80 degrees C, these monosubstituted isomers are transformed, via a dissociative pathway, into the product of thermodynamic control (5), which has the PPh(3) ligand on the apical Ru atom. The di- and trisubstituted derivatives [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(PPh(3))(2)] (6) and [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(11)(PPh(3))(3)] (7) are stepwise formed from 3-5 and PPh(3). Compound 6 has the PPh(3) ligands on the edge-bridging and apical Ru atoms, and compound 7 has an additional PPh(3) ligand on an unbridged basal Ru atom. The compound [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(mu-dppm)] (8), in which a basal and the apical Ru atoms are spanned by the dppm ligand, has been isolated from the reaction of 1 with bis(diphenylphosphino)methane.     

Über die Strukturaufklärung von (Hydroxy-oxo-cyclopentenyl)alkansäuren,den Aldolkondensationsprodukten von Dioxoencarbonsäuren aus Rinderleber

Structure Elucidation of (Hydroxy-oxo-cyclopentenyl)alkanoic Acids, the Aldol-Condensation Products of Dioxoene Acids from Cattle Liver During homogenization of cattle liver the highly instable dioxoene acids 13a , 13b , and 13c are formed. These acids cyclize in alkaline solution to yield pairs of stable (hydroxy-oxo-cyclopentenyl)alkanoic acids, which were isolated as methyl esters 4a / 5a , 4b / 5b , and 4c / 5c . The structures of these compounds were deduced from an enriched 3-mg mixture sample by microchemical reactions combined with a GC/MS analysis of the reaction products. Compound 13a was obtained as methyl ester by oxidation of the methyl ester of the corresponding F-acid with NaOCl. It was not possible to isolate 13a in pure form due to its high sensitivity. Instead of the methyl ester of 13a , 4a and 5a were isolated, of which the structures were established.     

A new technique for the identification of chloride ions by the formation of chromyl chloride

Summary A new technique is described for the identification of the chloride ion through the formation of chromyl chloride, based on the extraction of the latter with carbon tetrachloride. The identification limit is 2g of chloride. It is possible to carry out the test in the presence of many other anions, including fluoride, which cannot be present when the traditional distillation technique is employed.

---

Zusammenfassung Vorgeschlagen wird eine neue Technik zum Chloridnachweis durch Bildung von Chromylchlorid. Dieser Nachweis beruht auf der Extraktion des Chromylchlorids mit Tetrachlorkohlenstoff. Die Nachweisgrenze liegt bei 2g Chlorid, wobei die Möglichkeit besteht, den Test auch in Gegenwart von Fluorid durchzuführen, das bei Anwendung der üblichen Destillationsmethoden nicht anwesend sein darf.

     

Linked crystallites in the conducting topmost layer of polymer bilayer films controlled by temperature: from micro- to nanocrystallites.

Temperature has great impact on the structure and size of the linked crystallites of the conducting topmost layer formed at the surface of a polycarbonate film via the reaction BEDT-TTF+IBr [BEDT-TTF=bis(ethylenedithio)tetrathiafulvalene]. We show that fine temperature control permits formation of a semiconducting topmost layer of alpha'-(BEDT-TTF)(2)(I(x)Br(1-x))(3) crystallites with either micro- or nanometre size, a result that opens a route to miniaturized conducting plastic materials.