Neutron radiation damage in zirconium and its alloys

There has been much research and speculation recently on the nature of radiation induced defects in zirconium and its alloys, and in particular on the absence of voids at high fluences and temperatures in the range 0.3 to 0.5 T _m (T _m is the absolute melting temperature). Wolfenden and Farrell¹ have reviewed the evidence and suggest that α-Zr has so far resisted void formation during neutron irradiation because of: (a) the absence of a dislocation (loop or tangle) structure and/or (b) a low insoluble gas (e.g. helium) content.     

CHIROPTICAL PROPERTIES OF 1-DEOXY-1-THIOGALACTOPYRANOSIDES

Abstract

Continuing our studies of optically active sulfides we have investigated flexible systems incorporating the 1.3-O,S-chromophore, e.q., alkyl α-and B-D-thiogalactopyranosides and their tetraacetates. Although most substances were known from the literature, constitutional, configurational, and conformational assignments had hardly ever been proved rigorously; we therefore had to provide a firm basis by a systematic analysis of the ¹H and ¹³C NMR spectra of thioglycosides, the complexity of the carbohydrate signals necessitating high field studies. The compounds were thus, in the end, correlated with the natural thiogalactoside lincomycin, whose structure including its absolute configuration is known from X-ray investigations. CD curves have been measured at various temperatures in the range of 185–300 nm on a commercial spectropolarimeter equipped with a data processor and connected to a table calculator and plotter, directly furnishing data suitable for, e.g., Kronig-Kramers type transformations or curve analysis and displaying the results. These CD data were correlated with the UV spectra and the ORD curves of the substrates. Typically, the UV curves are devoid of detail except in the case of the acetates, where a shoulder in the region of the n→π? transition is discernible. In the ORD, the Cotton effects (CE) are largely suppressed by the background contribution of the “invisible giant” in the far UV. In the thiogalactopyranosides all accessible Cotton effects are associated with electron transitions within the sulfur or possibly the coupled O-C-S chromophore, whereas a relatively small negative, composite CE is contributed by the acetate carbonyl groups in the acetates.     

Biodegradable Cellulose Block Copolymers

Biodegradable polymers can be prepared by the incorporation of cellulose oligomeric blocks into the polymer backbone. Block copolymers prepared by reacting equimolar amounts of depolymerized cellulose triacetate (CTA) with MDI or TDI and block terpolymers prepared by reacting the CTA oligomer with poly (propylene glycol) capped with MDI or TDI were deacetylated and incubated with cellulysin at pH 5 and 50 °C. The intrinsic viscosity of each copolymer decreased substantially even after 10 hr incubation time. There was negligible acid hydrolysis. Cellulose showed a smaller decrease at the same incubation time-probably due to its lower accessibility. Methods for incorporating cellulose oligomeric blocks and other biodegradable blocks into different types of polymers are discussed.     

Thermal, rheological, and structural behaviors of natural and modified cassava starch granules, with sodium hypochlorite solutions

The use of chemically modified starches is widely accepted in various industries, with several applications. In this research, natural cassava starch granules were treated with standard sodium hypochlorite solution at 0.8, 2.0, and 5.0 g Cl/100 g starch. The native and modified starch samples were investigated by means of the following techniques: simultaneous thermogravimetry–differential thermal analysis, which allowed us to verify the thermal decomposition associated with endothermic or exothermic phenomena; and differential scanning calorimetry that was used to determine gelatinization enthalpy as well as the rapid viscoamylographic analysis that provided the pasting temperature and viscosity. By means of non-contact-atomic force microscopy method and X-ray powder patterns diffractometry, it was possible to observe the surface morphology, topography of starch granules, and alterations in the granules’ crystallinity.     

Improving human health through understanding the complex structure of glucose polymers

Two highly branched glucose polymers with similar structures—starch and glycogen—have important relations to human health. Slowly digestible and resistant starches have desirable health benefits, including the prevention and alleviation of metabolic diseases and prevention of colon cancer. Glycogen is important in regulating the use of glucose in the body, and diabetic subjects have an anomaly in their glycogen structure compared with that in healthy subjects. This paper reviews the biosynthesis–structure–property relations of these polymers, showing that polymer characterization produces knowledge which can be useful in producing healthier foods and new drug targets aimed at improving glucose storage in diabetic patients. Examples include mathematical modeling to design starch with better nutritional values, the effects of amylose fine structures on starch digestibility, the structure of slowly digested starch collected from in vitro and in vivo digestion, and the mechanism of the formation of glycogen α particles from β particles in healthy subjects. A new method to overcome a current problem in the structural characterization of these polymers using field-flow fractionation is also given, through a technique to calibrate evaporative light scattering detection with starch.

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.     

Ageing of surface treated thermoplastic polyolefins

Thermoplastic polyolefin panels were treated with a flame, flame & water, and accelerated thermo molecular adhesion process (ATmaP) treatment. XPS, contact angle and adhesion test (pull off) results were acquired over a one year period to determine the changes in the elemental composition, surface energy and adhesion strength respectively over time. All surface-treated thermoplastic polyolefin samples showed a sharp decline in adhesion strength up to an ageing period totalling 6 months. The decline in adhesion strength was correlated with a decline in the nitrogen-containing constituents and C–O functional groups at the surface and a decline in surface energy for the flame & water-treated sample. There was no significant change in adhesion strength for all samples for ageing periods greater than 6 months. ATmaP-treated thermoplastic polyolefin outperformed the other two surface treatments in adhesion strength tests due to ATmaP retaining nitrogen-based functional groups (mainly nitrogen oxides) over the year long study. This retention of functionality allowed for a slower ageing process for ATmaP-treated surfaces in comparison to the other surface treatments.     

STUDIES OF ADHESION OF METAL PARTICLES TO SILICA PARTICLES BASED ON ZETA POTENTIAL MEASUREMENTS

The zeta-potentials of silica, copper, platinum and gold particles have been measured as a function of pH. The isoelectric points were found to be at pH 3.0, 5.8, 3.0 and 3.5, respectively. In the pH range 3.0 to 5.8 copper and silica particles are oppositely charged and accordingly the coating of silica with copper particles could be demonstrated. In the case of gold and platinum the sign of the charge is such that direct adhesion to silica particles cannot be expected and this was also demonstrated in the case of platinum.     

Fatty acid desaturation index in human plasma: comparison of different analytical methodologies for the evaluation of diet effects

Stearoyl-CoA desaturase 1 (SCD1) plays a role in the development of obesity and related conditions, such as insulin resistance, and potentially also in neurological and heart diseases. The activity of SCD1 can be monitored using the desaturation index (DI), the ratio of product (16:1n-7 and 18:1n-9) to precursor (16:0 and 18:0) fatty acids. Here, different analytical strategies were applied to identify the method which best supports SCD1 biology. A novel effective approach was the use of the SCD1-independent fatty acid (16:1n-10) as a negative control. The first approach was based on a simple extraction followed by neutral loss triglyceride fatty acid analysis. The second approach was based on the saponification of triglycerides followed by fatty acid analysis (specific for the position of the double bond within monounsaturated fatty acids (MUFAs)). In addition to the analytical LC-MS assays, different matrices (plasma total triglyceride fraction and the very low-density lipoprotein (VLDL) fraction) were investigated to identify the best for studying changes in SCD1 activity. Samples from volunteers on a high-carbohydrate diet were analyzed. Both ultra HPLC (UHPLC)-MS-based assays showed acceptable accuracies (75–125 % of nominal) and precisions (<20 %) for the analysis of DI-specific fatty acids in VLDL and plasma. The most specific assay for the analysis of the liver SCD activity was then validated for specificity and selectivity, intra- and interday accuracy and precision, matrix effects, dilution effects, and analyte stability. After 3 days of high-carbohydrate diet, only the specific fatty acids in human plasma VLDL showed a significant increase in DI and associated SCD1 activity.