Reversible immobilization of engineered molecules by Ni-NTA chelators

Electrochemical synthesis of nickel-nitrilotriacetic acid (Ni-NTA) chelators, for subsequent immobilization of (His)(6)-tagged proteins (Photosystem II (PSII) as model molecule), on Au or Au-graphite electrodes is compared to chemical synthesis. Results show: (i) higher Ni-NTA surface density, (ii) shorter treatment time (1-12 min vs. 16 h normally needed for self-assembled monolayer (SAM)), (iii) possibility of addressing the chelator to only one Au electrode, in a sensor micro-array.     

Determination of phosphate in hydroponic nutrient solutions using flow injection potentiometry and a cobalt-wire phosphate ion-selective electrode

The direct flow injection potentiometric (FIP) analysis of phosphate in hydroponic nutrient solution has been carried out using a cobalt-wire ion-selective electrode (ISE). Synthetic hydroponic nutrient solution, commercial hydroponic nutrient solution and working hydroponic farm nutrient solution were analysed for phosphate using the FIP technique. It is shown that FIP results compare favourably to standard methods of analysis such as spectrophotometry and indirect photometric ion-pair chromatography. Reproducible FIP response curves with a slope of −(47.57±0.03) mV per decade and intercept of −(169.7±0.1) mV were obtained for four separate calibrations in the concentration range 5.0×10⁻⁴–1.0×10⁻² M H₂PO₄⁻. Anion corrections for interferences by Cl⁻, NO₃⁻ and SO₄²⁻ were applied to all samples using the selectivity coefficients determined independently using a fixed interference method. Nevertheless, it was found that anion corrections were not necessary, as the deviations fell within the bounds of experimental error for the cobalt-wire ISE technique (i.e.±2–5% R.S.D.). The proposed FIP method enables the direct determination of phosphate in hydroponic nutrient solutions.     

Homogeneous hydrogenation of ketones to alcohols with ruthenium complex catalysts

A number of ruthenium triphenylphosphine complexes catalyse the reduction of ketones to their corresponding alcohols in the presence of water. The most convenient catalyst precursors are carbonyl containing complexes which do not promote decarbonylation of the substrate. The hydrogenation of acetone with hydridochlorocarbonyltris(triphenylphosphine)ruthenium is first order with respect to the substrate concentration, the catalyst concentration, the hydrogen pressure and the water concentration. Turnover numbers up to 15,000 have been achieved with this catalyst. Other ketones are also reduced by RuHCl(CO)(PPh₃)₃ and the rate of the reaction is dependent on the nature of the substrate.     

Can a single oxidant with two spin states masquerade as two different oxidants? A study of the sulfoxidation mechanism by cytochrome p450

Density functional calculations were performed on the sulfoxidation reaction by a model compound I (Cpd I) of cytochrome P450. By contrast to previous alkane hydroxylation studies, which exhibit a dominant low-spin (LS) pathway, the sulfoxidation follows a dominant high-spin (HS) reaction. Thus, competing hydroxylation and sulfoxidation processes as observed for instance by Jones et al. (Volz, T. J.; Rock, D. A.; Jones, J. P. J. Am. Chem. Soc. 2002, 124, 9724) are the result of a two-state reactivity scenario, whereby the hydroxylation originates from the LS pathway and the sulfoxidation from the HS pathway. In this manner, two spin states of a single oxidant (Cpd I) can be disguised as two different oxidants. The calculations rule out the possibility that a second oxidant (the ferric peroxide, Cpd 0 species) interferes in the observed results of Jones et al.     

Solvent Effects on the Absorption Spectrum of the Product and the Equilibrium Constant for the Proton Transfer Reaction from 1-Phenacylquinolinium Bromide to Amines

The equilibrium constants, K ₂, have been determined for the proton-transfer reactions of 1-phenacylquinolinium ion, PHQ⁺, with several amines {triethylamine (TEA), N,N,N′,N′-tetramethylethylenediamine (ED), N,N,N′, N′-tetramethylpropanediamine (PD), N,N,N′,N′-tetramethylbutanediamine (BD), and 1,8-bis(dimethylamino-naphthalene (DMAN)} in acetonitrile (AN), AN-tetrahydrofuran (THF) and AN-ethanol (EtOH) mixtures. The reaction was followed spectrophotometrically using a stopped-flow technique. The K ₂ value decreased for DMAN and increased for TEA with increasing vol-% of THF in AN-THF mixtures. The changes in the K ₂ value for ED, PD and BD changed in the order: ED, PD and BD from a pattern similar to TEA to a pattern similar to DMAN. The change in the K ₂ value for DMAN with increasing vol-% of THF in AN-THF mixtures was explained by the effect of polarity on the stability of P⁻Q⁺ (the deprotonated product of PHQ⁺). The effect of THF on the K ₂ value is consistent with that of the peak wavelength of the absorption spectrum of P⁻Q⁺. The change in the K ₂ value for TEA, ED, PD and BD depended on the structures of the protonated bases, one of the products for this reaction. The effect of EtOH on the K ₂ value for DMAN was examined in ternary EtOH-THF-AN mixtures that contain different amounts of EtOH and whose relative permittivities were adjusted to that of EtOH. The K ₂ value increased with increasing vol-% of EtOH because of the stabilization of P⁻Q⁺ upon the formation of the hydrogen-bonded complex with EtOH. The absorption spectrum of P⁻Q⁺ demonstrated a blue shift as the vol-% of EtOH increased.     

Double hexagonal chains with minimal total <Emphasis Type="Italic">π</Emphasis>-electron energy

The total energy of all π-electrons in a conjugated hydrocarbon (within the framework of HMO approximation) is the sum of the absolute value of all the eigenvalues of its corresponding graph. In this paper, we consider “double hexagonal chains” as benzenoids constructed by successive fusions of successive naphthalenes along a zig–zag sequence of triples of edges as appear on opposite sides of each naphthalene unit. It is shown that if the fusions are such as to give a polyaceacene then the total π-electron energy is the minimum from among all the double hexagonal chains with the same number of naphthalene units.      

Physico-chemical characterization of nanofiltration membranes.

This study presents a methodology for an in-depth characterization of six representative commercial nanofiltration membranes. Laboratory-made polyethersulfone membranes are included for reference. Besides the physical characterization [molecular weight cut-off (MWCO), surface charge, roughness and hydrophobicity], the membranes are also studied for their chemical composition [attenuated total reflectance Fourier spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS)] and porosity [positron annihilation spectroscopy (PAS)]. The chemical characterization indicates that all membranes are composed of at least two different layers. The presence of an additional third layer is proved and studied for membranes with a polyamide top layer. PAS experiments, in combination with FIB (focused ion beam) images, show that these membranes also have a thinner and a less porous skin layer (upper part of the top layer). In the skin layer, two different pore sizes are observed for all commercial membranes: a pore size of 1.25-1.55 angstroms as well as a pore size of 3.20-3.95 angstroms (both depending on the membrane type). Thus, the pore size distribution in nanofiltration membranes is bimodal, in contrast to the generally accepted log-normal distribution. Although the pore sizes are rather similar for all commercial membranes, their pore volume fraction and hence their porosity differ significantly.     

On the synthesis of 3(5)-carbomethoxy-4-hetarylpyrazoles

3(5)-Carbomethoxy-4-hetarylpyrazoles 3 can be obtained by the aromatization of the corresponding cis-3-benzamido-3-carbomethoxy-4-hetaryl-Δ¹-pyrazolines 2 obtained by 1,3-dipolar cycloaddition of diazo-methane with methyl Z-2-benzamido-3-hetarylpropenoates 1. An explanation, based on FMO theory, for the different reactivity of the dipolarophiles with diazomethane is given.     

Crystallization of binary carboxylic acids characterized with streaming potential measurement

The streaming potential of supersaturated solution of binary carboxylic acids, which have even carbon atoms, was determined to characterize crystallization under different temperatures. The value of the streaming potential was related to the type and solubility of the acids and the starting temperature of crystallization, and was easily influenced by the pressure difference of the liquid or the rate of temperature decline. When the temperature was declined to the point where a crystal nucleus appeared, the streaming potential reached the minimum. Thereafter, as the temperature was sequentially lowered, some minicrystals grew, and the streaming potential presented an ascendant tendency. The higher the starting temperature of the acids saturated solution, the higher is the temperature corresponding to the streaming potential minimum. The less the carbon atoms in the acids and the greater the solubility of the acids are, the higher is the temperature of the streaming potential minimum. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of the fibre-forming material structure and silica nanoparticles

The paper discusses the thermal properties of alginate fibres made from alginic acid or sodium alginate and from alginates substituted with divalent metal ions during the fibre-forming stage. Alginate fibres with an addition of silica nanoparticles have also been examined. The selection of fibre-forming parameters was intended to obtain the best either sorption or strength properties depending on the specific fibre application. Thermal curves of the fibres under investigations obtained by under air atmosphere and differential scanning calorimetry (DSC) under neutral gas atmosphere have been interpreted from the view of physical and chemical changes in the fibre-forming material. Based on thermogravimetric curves, the fibre thermal stability indices have been determined. It has been found that the addition of silica nanoparticles exerts a positive influence on the thermal properties of the examined fibres.