Synthesis and spectroscopic characterization of new triorganotin(IV) complexes with the bis(1‐methyl‐1H‐imidazol‐2‐ylthio)acetate ligand: effects on trout erythrocyte components

Triorganotin(IV) derivatives containing the anionic ligand bis(1‐methyl‐1H‐imidazol‐2‐ylthio)acetate [(S‐tim)₂CHCO₂]⁻ were synthesized from the reaction between R₃SnCl acceptors (R = Me and Ph) and the sodium salt of the ligand. Mono‐nuclear complexes of the type [(S‐tim)₂CHCO₂]SnR₃ were obtained, which were fully characterized by elemental analyses and FT‐IR in the solid state, and by NMR (¹H, ¹³C and ¹¹⁹Sn) spectroscopy and electrospray ionization mass in solution. The toxic effects shown by these compounds on trout erythrocyte components showed that the toxicity of the organotin(IV) complexes depends on the nature and on the lipophilicity of the substituents on the metal centre. Copyright © 2007 John Wiley & Sons, Ltd.     

Toward a Greener World—Cyclodextrin Derivatization by Mechanochemistry

Cyclodextrin (CD) derivatives are a challenge, mainly due to solubility problems. In many cases, the synthesis of CD derivatives requires high-boiling solvents, whereas the product isolation from the aqueous methods often requires energy-intensive processes. Complex formation faces similar challenges in that it involves interacting materials with conflicting properties. However, many authors also refer to the formation of non-covalent bonds, such as the formation of inclusion complexes or metal–organic networks, as reactions or synthesis, which makes it difficult to classify the technical papers. In many cases, the solubility of both the starting material and the product in the same solvent differs significantly. The sweetest point of mechanochemistry is the reduced demand or complete elimination of solvents from the synthesis. The lack of solvents can make syntheses more economical and greener. The limited molecular movements in solid-state allow the preparation of CD derivatives, which are difficult to produce under solvent reaction conditions. A mechanochemical reaction generally has a higher reagent utilization rate. When the reaction yields a good guest co-product, solvent-free conditions can be slower than in solution conditions. Regioselective syntheses of per-6-amino and alkylthio-CD derivatives or insoluble cyclodextrin polymers and nanosponges are good examples of what a greener technology can offer through solvent-free reaction conditions. In the case of thiolated CD derivatives, the absence of solvents results in significant suppression of the thiol group oxidation, too. The insoluble polymer synthesis is also more efficient when using the same molar ratio of the reagents as the solution reaction. Solid reactants not only reduce the chance of hydrolysis of multifunctional reactants or side reactions, but the spatial proximity of macrocycles also reduces the length of the spacing formed by the crosslinker. The structure of insoluble polymers of the mechanochemical reactions generally is more compact, with fewer and shorter hydrophilic arms than the products of the solution reactions.     

A Plane-Strain Formulation of Elastic-Plastic Constitutive Laws

ABSTRACT

Constitutive laws for elastic-plastic materials are derived by eliminating the transverse stress component on the basis of the plane-strain constraint. This leads to a fictitious hardening and temperature dependence of the loading function. For standard elastic-plastic materials the resulting laws are associated; however, the plastic strain state is represented by equivalent plastic-strain measures, which also account for transverse yielding. The new constitutive laws, together with the standard reduced form of the equilibrium and compatibility equations, permit the formulation of the plane-strain elastic-plastic analysis problem in terms of the in-plane stress components only. In the case of perfectly plastic materials, the subsequent plane-strain yield surfaces are contained within a domain bounded by a limit surface which represents the yield condition normally adopted in plane-strain limit analysis.     

Multivariate analysis of fMRI time series: classification and regression of brain responses using machine learning

Machine learning and pattern recognition techniques are being increasingly employed in functional magnetic resonance imaging (fMRI) data analysis. By taking into account the full spatial pattern of brain activity measured simultaneously at many locations, these methods allow detecting subtle, non-strictly localized effects that may remain invisible to the conventional analysis with univariate statistical methods. In typical fMRI applications, pattern recognition algorithms "learn" a functional relationship between brain response patterns and a perceptual, cognitive or behavioral state of a subject expressed in terms of a label, which may assume discrete (classification) or continuous (regression) values. This learned functional relationship is then used to predict the unseen labels from a new data set ("brain reading"). In this article, we describe the mathematical foundations of machine learning applications in fMRI. We focus on two methods, support vector machines and relevance vector machines, which are respectively suited for the classification and regression of fMRI patterns. Furthermore, by means of several examples and applications, we illustrate and discuss the methodological challenges of using machine learning algorithms in the context of fMRI data analysis.     

A new approach to the decontamination of asbestos-polluted waters by treatment with oxalic acid under power ultrasound

A suspension of chrysotile asbestos fibres in aqueous 0.5M oxalic acid was subjected to power ultrasound with the aim to disrupt and detoxify the mineral by the leaching action of oxalic acid on its structural cations acting simultaneously with a vigorous acoustic cavitation. Sonication was performed in a "cavitating tube", a vertical hollow vibrating cylinder made of titanium, operating at 19.2 kHz and 150 W. Treatment lasted from 2.5 to 21 h. Scanning electron microscopy (SEM) showed that the joint action of the chelating agent and ultrasound (though not of either when applied independently) mostly converted asbestos fibres into micrometric aggregates and nano-sized debris, whose morphology totally differed from asbestos fibres. When treated suspensions were filtered through CA membranes (pore size 0.20 microm), more than half of the asbestos went through the filter because it had either been brought in solution or dispersed in the form of extremely small particles. Most of the structural metal ions were brought into solution (ICP-AES). After the treatment the BET surface area of the recovered solid was tenfold greater than the original. The crystalline fraction of residual solids, though resembling the original sample in XRD, was shown by micro-Raman spectra to be made of antigorite, a polymorph form of serpentine. Furthermore, as the length of these antigorite fibrils lay outside the fibre range rated as a health hazard under worldwide regulations, our procedure can be employed for the decontamination of chrysotile-polluted waters and sediments.     

Structural insights into methyl‐ or methoxy‐substituted 1‐(α‐aminobenzyl)‐2‐naphthol structures: the role of C—H…π interactions

Aminobenzylnaphthols are a class of compounds containing a large aromatic molecular surface which makes them suitable candidates to study the role of C—H…π interactions. We have investigated the effect of methyl or methoxy substituents on the assembling of aromatic units by preparing and determining the crystal structures of (S,S)‐1‐{(4‐methylphenyl)[(1‐phenylethyl)amino]methyl}naphthalen‐2‐ol, C₂₆H₂₅NO, and (S,S)‐1‐{(4‐methoxyphenyl)[(1‐phenylethyl)amino]methyl}naphthalen‐2‐ol, C₂₆H₂₅NO₂. The methyl group influenced the overall crystal packing even if the H atoms of the methyl group did not participate directly either in hydrogen bonding or C—H…π interactions. The introduction of the methoxy moiety caused the formation of new hydrogen bonds, in which the O atom of the methoxy group was directly involved. Moreover, the methoxy group promoted the formation of an interesting C—H…π interaction which altered the orientation of an aromatic unit.     

Microwave Irradiation in Micro‐ Meso‐Fluidic Systems; Hybrid Technology has Issued the Challenge

A combination of microwave irradiation and flow chemistry has been described as a promising smart and hyphenated technology that can fuse and synergize the benefits of the techniques. The cells and tissues of all living organisms promote a huge number of bioorganic reactions that occur as flow systems and not the batch‐type conditions typically used by chemists and biotechnologists. Microwave‐assisted chemical conversion carried out in continuous flow mode with micro‐ or meso‐channel reactors can offer significant processing advantages, including improved thermal exchange, energy efficiency, safety, mixing control, a wider range of reaction conditions, repeatability and scalability as well as dramatic reductions in side‐reactions and degradations. This review will discuss relevant examples of organic synthesis and nanoparticles production performed in continuous flow mode with integrated microwave irradiation in micro‐ or mesofluidic systems.     

Template effect of tetrathiafulvalene in the formation of cyclobis(paraquat-p-phenylene)

[reaction: see text] The template effect exerted by tetrathiafulvalene (TTF) in the ring-closure reaction of the trication 5(3+) yielding cyclobis(paraquat-p-phenylene) has been quantitatively evaluated in acetonitrile at 62 degrees C with UV-vis spectrophotometry. The rate of ring closure of the trication 5(3+) largely increases in the presence of the template (a maximum increase of ca. 80 times at [TTF] approximately 0.14 M). The results are compared with those of other aromatic templates, 2 and 3, that were provided with polyethereal sidearms and indicate that the template ability of tetrathiafulvalene is comparable or better than that of the others.     

The electron transfer rate of large TPA based compounds: a joint theoretical and electrochemical approach

A series of triphenylamine (TPA) based compounds is investigated by means of density functional theory and cyclic voltammetry. Using the Nicholson's formalism, the measured deltaE(p) are correlated with B3LYP/6-31G* calculated reorganisation energies (lambda), elucidating the trend followed by the electron transfer rate of these compounds. Besides the direct dependency upon the dimension of the cationic fragment contributing to the hole stabilisation, the lambdas are tuned by the symmetry local to the TPA units, as evidenced by the structural relaxation of the cations. MDTAB shows the interesting combination of low ionisation potential (IP) and low lambda. This can make this compound interesting for practical applications in organic light emitting diode (OLEDs) devices, due to the direct correlation of the IP and lambda with the hole transfer efficiency to the anode, along with the hole mobility.     

Lyapunov Characteristic Exponents for smooth dynamical systems and for hamiltonian systems; A method for computing all of them. Part 2: Numerical application

Summary The present paper, together with the previous one (Part 1: Theory, published in this journal) is intended to give an explicit method for computing all Lyapunov Characteristic Exponents of a dynamical system. After the general theory on such exponents developed in the first part, in the present paper the computational method is described (Chapter A) and some numerical examples for mappings on manifolds and for Hamiltonian systems are given (Chapter B).

---

Sommario Questo articolo, insieme con il precedente (Parte 1: Teoria, pubblicato in questa stessa rivista) è inteso a fornire un metodo esplicito per il calcolo di tutti gli esponenti caratteristici di Lvapunov per un sistema dinamico. Dopo la teoria generale su tali esponenti sviluppata nella prima parte, qui si illustra il metodo di calcolo (Capitolo A) e si danno esempi numerici per applicazioni di varietà in sè e per sistemi Hamiltoniani (Capitolo B).