Penicillin biosynthesis: Retention of configuration at c-3 of valine during its incorporation into the arnstein tripeptide

[3-³H]-valine was efficiently synthesised from sodium α-ketoisovalerate. With a β-lactam negative mutant of C. acremonium, l-[1-¹⁴C-3-³H]-valine and dl-[1-¹⁴C-3-³H]-valine were independently incorporated into the Arnstein tripeptide dimer, i.e. Bis-δ-(l-α-aminodipyl)-l-cystinyl-bis-d-valine, with full retention of trieium at C-3 of the d-valine residue. This result strongly suggested retention of configuration at C-3 of valine when the tripeptide was biosynthesised, and further limited the number of possible mechanisms for the biosynthesis of penicillins.     

15-甲基-双环[10,3,0]十五碳-1(12)-烯-13-酮的晶体结构及分子稳定构象

15-甲基-双环[10,3,0]十五碳-1(12)-烯-13-酮的单晶属空间群P2_1/n,晶胞参数:a=0.4838(1)nm,b=1.3949(2)nm,c=2.1645(4)nm,β=92.07(1)°,Z=4.其中平面五员环呈刚性。另一个含烯十二员环的实际构象与分子力学计算的最稳定构象一致。     

Human neural stem cell growth and differentiation in a gradient-generating microfluidic device

This paper describes a gradient-generating microfluidic platform for optimizing proliferation and differentiation of neural stem cells (NSCs) in culture. Microfluidic technology has great potential to improve stem cell (SC) cultures, whose promise in cell-based therapies is limited by the inability to precisely control their behavior in culture. Compared to traditional culture tools, microfluidic platforms should provide much greater control over cell microenvironment and rapid optimization of media composition using relatively small numbers of cells. Our platform exposes cells to a concentration gradient of growth factors under continuous flow, thus minimizing autocrine and paracrine signaling. Human NSCs (hNSCs) from the developing cerebral cortex were cultured for more than 1 week in the microfluidic device while constantly exposed to a continuous gradient of a growth factor (GF) mixture containing epidermal growth factor (EGF), fibroblast growth factor 2 (FGF2) and platelet-derived growth factor (PDGF). Proliferation and differentiation of NSCs into astrocytes were monitored by time-lapse microscopy and immunocytochemistry. The NSCs remained healthy throughout the entire culture period, and importantly, proliferated and differentiated in a graded and proportional fashion that varied directly with GF concentration. These concentration-dependent cellular responses were quantitatively similar to those measured in control chambers built into the device and in parallel cultures using traditional 6-well plates. This gradient-generating microfluidic platform should be useful for a wide range of basic and applied studies on cultured cells, including SCs.     

Benzolignanoid and Polyphenols from Origanum Vulgare

A new dihydrobenzodioxane derivative, origalignanol ( 10 ), together with nine polyphenolic compounds, salvianolic acid A ( 1 ), salvianolic acid C ( 2 ), lithospermic acid ( 3 ), apigenin 7‐O‐β‐D‐glucuronide ( 4 ), apigenin 7‐O‐β‐D‐(6″‐methyl)glucuronide ( 5 ), luteolin, ( 6 ), luteolin 7‐O‐β‐D‐glucopyranoside ( 7 ), luteolin 7‐O‐β‐D‐glucuronide ( 8 ), and luteolin 7‐O‐β‐D‐xylopyranoside ( 9 ), were isolated from the aqueous ethanolic extract of the aerial parts of Origanum vulgare for the first time. The structure of new compound 10 was determined on the basis of spectroscopic methods. Compound 5 is probably an artifact formed during the isolation. Compounds 1, 2 and 3 showed strong DPPH radical scavenging activity with an EC₅₀ of 7.2 ± 0.4, 9.6 ± 0.9, and 9.5 ± 0.7 μM, respectively, and protected rat hepatocytes from CCl₄‐damage at 100 μM.     

Synthesis and properties of amine‐containing poly(arylene ether sulfone) as an anion‐exchange matrix

Poly(arylene ether sulfone) (PSF), showing good thermal stability and excellent mechanical properties, was synthesized as an anion‐exchange matrix. It was synthesized by the condensation polymerization between bisphenol A and 4,4′‐dichlorodiphenylsulfone. 1°‐Amine‐containing poly(arylene ether sulfone) (1°‐APSF) was synthesized by the reduction reaction of a nitrated PSF. Then, it was transferred to 3°‐amine‐containing poly(arylene ether sulfone) (3°‐APSF) by the alkylation of the amine of 1°‐APSF. The properties of PSF, 1°‐APSF, and 3°‐APSF were investigated by Fourier transform infrared, ¹H NMR spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The introduction of the 3°‐amine group into PSF increased the glass‐transition temperature but decreased thermooxidative stability. The ion‐exchange capacities of 1°‐APSF and 3°‐APSF were shown to be 2.24 and 2.86 mequiv/g, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4281–4287, 2002     

CIDEP studies of the photolysis of the lignin model compound α-guaiacoxylacetoveratrone: the role of triplet reactions in aqueous and hydroxylic solvents

Free radical reactions induced by the photolysis of the lignin model compound α-guaiacoxylacetoveratrone have been studied by conventional and time-resolved ESR spectroscopy. In the presence of efficient hydrogen donors such as aqueous and hydroxylic solvents the primary reaction involves photoreduction of the triplet phenacyl ether to form the ketyl radical followed by rapid cleavage to the phenacyl radical and guaiacol. Subsequent formation of polarized guaiacoxyl radicals is due to secondary photo-oxidation. The cleavage of the ketyl radical is retarded in basic media and accelerated in acetic acid. Minor reaction pathways involving excited singlets cannot be ruled out by the current CIDEP observations.     

Mechanisms of methane activation and transformation on molybdenum oxide based catalysts

We present a comprehensive survey of different C-H activation pathways over various kinds of active sites of terminal oxygens [=O] and bridge oxygens [-O-] by using Mo3O9 model systems. This allows us to provide some insights into fundamental issues concerning C-H activation by metal oxo species involved in many heterogeneous, homogeneous, and enzymatic processes. We show that H abstraction is the most feasible reaction pathway for the activation of a C-H bond on molybdenum oxides; and that [=O] is more active than [-O-]. Our calculations also suggest that (2+2) can be an alternative if M=O bond possesses a high polarity, while (5+2) can provide another effective pathway if two M=O bonds are in close proximity. Implications for the related heterogeneous, homogeneous, and enzymatic processes are discussed.     

Direct STM investigation of cinchona alkaloid adsorption on Cu(III)

Scanning tunneling microscopy (STM) combined with cyclic voltammetry has been employed to investigate the adsorption of cinchonine on Cu(111). Similar to cinchonidine, cinchonine forms a long-range ordered adlayer with (4 x 4) symmetry on the substrate. The structural details on molecular adsorption were obtained by high-resolution STM images. On the basis of the previous results and obtained STM images, the quinoline ring is proposed to lie parallel to Cu(111) and serve as an anchoring group. The chiral quinuclidine moiety extends out of the surface to facilitate the interaction with the prochiral reactants.     

Colloidal adhesion of phospholipid vesicles: high-resolution reflection interference contrast microscopy and theory

High-resolution reflection interference contrast microscopy (HR-RICM) was developed for probing the deformation and adhesion of phospholipid vesicles induced by colloidal forces on solid surfaces. The new technique raised the upper limit of the measured membrane–substrate separation from 1 to 4.5 μm and improved the spatial resolution of the heterogeneous contact zones. It was applied to elucidate the effects of wall thickness, pH and osmotic stress on the non-specific adhesion of giant unilamellar vesicles (ULV) and multilamellar vesicles (MLV) on fused silica substrates. By simultaneous cross-polarization light microscopy and HR-RICM measurements, it was observed that ULV with the wall thickness of a single bilayer would be significantly deformed in its equilibrium state on the substrate as the dimension of its adhesive–cohesive zone was 29% higher than the theoretical value of a rigid sphere with the same diameter. Besides, electrostatic interaction was shown as a significant driving force for vesicle adhesions since the reduction in pH significantly increased the degree of deformation of adhering ULV and heterogeneity of the adhesion discs. The degree of MLV deformation on the solid surfaces was significantly less than that of ULV. When the wall thickness of vesicle increased, the dimension of contact zone was reduced dramatically due to the increase of membrane bending modulus. Most important, the adhesion strength of colloidal adhesion approached that of specific adhesion. Finally, the increase of osmotic stress led to the collapse of adhering vesicles on the non-deformable substrate and raised the area of adhesive contact zone. To interpret these results better, the equilibrium deformation of adhering vesicle was modeled as a truncated sphere and the adhesion energy was calculated with a new theory.     

Pretilt angle generation by UV exposure during imidization of polyimide

We investigated pretilt angle generation and liquid crystal (LC) alignment by ultraviolet exposure during the imidization of polyimide (PI). The generated pretilt angle of a nematic (N) LC using an in situ photo-alignment method is smaller than that using a conventional photo-alignment method on a surface of PI having side chains. The NLC pretilt angles using an in situ photo-alignment method injected at isotropic phase increased with annealing were observed.