A sulfonic acid functionalized ionic liquid as a homogeneous and recyclable catalyst for the one-pot synthesis of α-aminophosphonates

A sulfonic acid functionalized ionic liquid is used as a Brønsted acid catalyst for the one-pot, three-component synthesis of α-aminophosphonates from aldehydes and ketones at room temperature in water. This homogeneous catalytic procedure is simple and efficient and the catalyst can be reused at least six times without any noticeable decrease in catalytic activity.     

Two building blocks of microwave photonics filters in the presence of group delay ripple: a comparative survey

We have developed an analytic approach to investigate the effect of group delay ripple of the dispersive devices on the performance of two major building blocks of microwave-photonic filters. Firstly, performance of PM-based block in the presence of an arbitrary group delay ripple (GDR) is analyzed and compared with the ripple-free case to reveal the destructive effects of added group delay ripple. In the next step, we repeat the proposed approach for the AM-based one; again, the performance is compared with the ripple-free case. Two distortion metrics are also introduced to quantify this distortion. Comparison of the performance of two building blocks in the presence of group delay ripple unveils some interesting characteristics of microwave-photonic filters which have not been mentioned so far. We also add a general survey of two analyzed building blocks to present their respective most significant advantages and shortcomings. The simulated Optisystem results conform to our proposed analytical approach and verify the theoretical model.     

Homogeneous liquid-liquid microextraction via flotation assistance coupled with gas chromatography-mass spectrometry for determination of myclobutanil in cucumber,tomato, grape,and strawberry using genetic algorithm

Facile and potent homogeneous liquid–liquid microextraction via flotation assistance method (HLLME-FA) combined with gas chromatography-mass spectrometry was proposed for determination of trace amounts of myclobutanil in fruit and vegetable samples. The paramount parameters, such as extraction and homogeneous solvent types and volumes, ionic strength and extraction time were studied. Under optimum conditions, the detection limit of 0.005 ng g^?1, the linear range of 0.05–100 ng g^?1, and the precision of 3.8% were acquired. A three-layer arti?cial neural network (ANN) model was used with 10 neurons and tan-sigmoid function at hidden layer and a linear transfer function at output layer were developed to predict the process. The results indicated that the proposed ANN model could perfectly predict the process with the mean square error of 0.89%. Then genetic algorithm was utilised to optimise the parameters. The proposed procedure showed satisfactory results for analysis of cucumber, tomato, grape, and strawberry.     

Synthesis of novel pyrrole derivatives from the multicomponent reaction using the new N-sulfonic acid modified poly (styrene-diethylenetriamine) as a solid acid catalyst

An efficient acid-catalyzed synthesis of 1,5-diaryl-3-(arylamino)-1H-pyrrol-2(5H)-ones is reported using novel N-sulfonic acid modified poly (styrene-diethylenetriamine) through three-component reaction between aldehyde, amine, and ethyl pyruvate in high yields and short times. This heterogeneous solid catalyst is produced by reacting amine-modified chloromethyl polystyrene with neat chlorosulfonic acid. The structure of the synthesized catalyst was examined with Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), dynamic light scattering (DLS), thermogravimetric analysis (TGA), differential thermal analysis (DTA), scanning electron micrograph (SEM), Brunauer–Emmett–Teller (BET), energy dispersive spectroscopy (EDS), and elemental analyses. The heterogeneous catalyst has many advantages, including an easy work-up procedure, a high product yield, and the capability to be easily regenerated and reused for at least five cycles without losing its activity.     

POSS nanocrosslinked poly (ethylene glycol) hydrogel as hybrid material support for silver nanocatalyst

Silver nanoparticles supported on polyhedral oligomeric silsesquioxane (OA‐POSS) nanocrosslinked poly (ethylene glycol)‐based hydrogels (PEG₆₀₀‐POSS/Ag NPs) as novel nanohybrid catalysts were synthesized for the first time. The as‐prepared nanohybrid hydrogels were fully characterized by FT‐IR, SEM, EDX, XRD, TEM and TGA. PEG₆₀₀‐POSS/Ag NPs exhibited excellent catalytic performance for the reduction of 4‐nitrophenol (4‐NP) to 4‐aminophenol (4‐AP) in water at room temperature in the presence of borohydride.     

A promising electrochemical sensing platform based on copper nanoparticles-decorated polymer in carbon nanotube electrode for monitoring methimazole

In this paper, a novel and convenient electrochemical sensor for detection of methimazole (MMI) by differential pulse voltammetry is presented. This sensor was fabricated by dripping well-dispersed MWCNTs onto glassy carbon electrode (GCE) surface, and then poly-l-Arg (P-L-Arg) film was deposited on the electrode. Finally, Cu nanoparticles (CuNPs) were electrochemically deposited on the resulting film by using cyclic voltammetry to prepare CuNPs-P-L-Arg/MWCNTs/GCE. The surface morphology of the electrodes has been studied by scanning electron microscopy. Studies reveal that the irreversible oxidation of MMI was highly facile on CuNPs-P-L-Arg/MWCNTs/GCE. The dynamic detection range of this sensor to MMI was 5.2–50 µM, with the detection limit of 2 µM. A new voltammetric method for determination of MMI was erected and shows good sensitivity and selectivity, very easy surface update and good stability. The analytical application of the modified electrode is demonstrated by determining MMI in biological fluids (serum).     

A novel ternary GO@SiO2‐HPW nanocomposite as an efficient heterogeneous catalyst for the synthesis of benzazoles in aqueous media

A new solid acid catalyst, consisting of 12‐phosphotungstic heteropoly acid (HPW) supported on graphene oxide/silica nanocomposite (GO@SiO₂), has been developed via immobilizing HPW onto an amine‐functionalized GO/SiO₂ surface through coordination interaction (GO@SiO₂‐HPW). The GO@SiO₂‐HPW nanocomposite was characterized by Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and powder X‐ray diffraction (XRD). The prepared nanocomposite could be dispersed homogeneously in water and further used as a heterogeneous, reusable, and efficient catalyst for the synthesis of benzimidazoles and benzothiazoles by the reaction of 1,2‐phenelynediamine or 2‐aminothiophenol with different aldehydes.     

Oxoperoxo tungsten(VI) complex immobilized on Schiff base-modified Fe3O4 magnetic nanoparticles as a heterogeneous catalyst for oxidation of alcohols with hydrogen peroxide

Oxoperoxo tungsten(VI) complex immobilized on Schiff base-modified Fe₃O₄ super paramagnetic nanoparticles were synthesized and appropriately characterized using FT-IR, XRD, SEM, TEM, EDX, BET, and VSM analysis. The synthesized nanoparticles efficiently catalyzed oxidation of benzylic alcohols with H₂O₂ as oxidant in high yields, with high to excellent selectivity. The catalyst can be recovered using an external magnetic field and recycled for subsequent oxidation reactions without any appreciable loss of efficiency. The simple preparation, high activity, excellent selectivity, and simple recoverability of the catalyst are advantageous.     

Fabrication of novel solid-state supercapacitor using a Nafion polymer membrane with graphene oxide/multiwalled carbon nanotube/polyaniline

In the current work, the effect of aniline concentration on the polymerization process and supercapacitive behavior of graphene oxide/multiwalled carbon nanotubes/polyaniline (GMP) nanocomposites were studied. Based on the obtained results, GMP nanocomposite with 0.5 M aniline (GMP5) was selected as the optimum concentration in terms of high current density and high specific capacitance. Nafion-based ionic polymer-free metal composite (IPFMC) supercapacitor was fabricated for the GMP5 nanocomposite. Solid-state symmetric supercapacitor was made after spraying of GMP5 in. on both sides of Nafion membrane. The electrochemical properties were investigated by cyclic voltammetry (CV), galvanostatic charge–discharge (CD), and electrochemical impedance spectroscopy (EIS) techniques in 0.5 M Na₂SO₄.The specific capacitance of 383.25 F g^?1 (326 mF cm^?2) and 527.5 F g^?1 (42 mF cm^?2) was obtained for the GMP5 in solid-state supercapacitor and three-electrode cell at a scan rate of 10 mV s^?1, respectively. The maximum energy and power densities of 53.64 and 1777.4 W kg^?1 were obtained for the IPFMC-based supercapacitor.

Open image in new window

Graphical abstract Schematic of the solid-state supercapacitor based on the GMP5 nanocomposite

     

Thulium(III) Ions Monitoring by a Novel Thulium(III) Microelectrode Based on a S‐N Schiff Base

This study presents for the first time development of a highly selective and sensitive thulium(III) micro‐sensor. Theoretical calculations were conducted on a S‐N Schiff base [thiophene‐2‐carbaldehyde‐(7‐methyl‐1,3‐benzothiazol‐2‐yl) hydrazone] (TCMH) in order to obtain a clue about the tendency of TCMH to Tm(III) and some other metal ions. Then, TCMH was used as a membrane‐active component to prepare a Tm(III)‐selective polymeric membrane microelectrode. In line with the resulting data, the electrode exhibits a Nernstian response toward Tm(III) ions for a very wide concentration range (1.0×10^?11–4.0×10^?6 M) with a detection limit of 1.0×10^?11 (ca. 1.5 ppt) and a very fast response time in the whole concentration range (<5 s). In addition, the results showed that the certain microelectrode could be applied in the pH range of 4.0–11.0 with a usage of more than one month without any considerable potential divergence.