Surface composition of spray-dried milk protein-stabilised emulsions in relation to pre-heat treatment of proteins

Several important technical properties of spray-dried food powders depend on particle-liquid interactions (e.g. wettability, dispersability) and particle-particle interactions (e.g. flowability). It can be assumed that the chemical composition of the surface layer of the particles to a large extent determine these properties. The present study has been aimed to investigate the relation between the surface composition of spray-dried milk protein-stabilised emulsions and pre-heat treatment of the proteins. Solutions of WPC were heat-treated at low (60-90 degrees C) and high (140 degrees C) temperature and the degree of denaturation was determined, prior to the preparation of emulsions with rapeseed oil. The surface composition of the dry powders were established by using ESCA (electron spectroscopy of chemical analysis). The emulsions were characterised by droplet size distribution before spray drying and after dissolution of the powders. Also free fat extractions and estimations of wettability (dissolution rates) were performed. The powder surface coverage of protein decreased with increasing degree of protein denaturation before the emulsification, whereas the emulsion droplet size increased both before spray drying and after reconstitution of powders. The free fat extraction as well as the dissolution rate, whereof the latter decreased with increasing surface fat coverage, correlated well with the fat coverage of the powder surface.     

Preparation and partial characterization of a soluble site-to-site directed enzyme complex composed of alcohol dehydrogenase and lactate dehydrogenase

A soluble, bifunctional enzyme complex has been prepared by crosslinking lactate dehydrogenase and alcohol dehydrogenase with glutaraldehyde. The crosslinking was performed on a solid phase while the active sites of alcohol dehydrogenase and lactate dehydrogenase were held adjacent to one another with the aid of a bis-NAD analog. Subsequently, the enzyme complex was released from the solid phase. The soluble enzyme complex was then purified by using NAD-Sepharose as an affinity adsorbent. Based on gel filtration experiments, the complex was estimated to consist of one of each dehydrogenase. By using a third enzyme, lipoamide dehydrogenase, which competes with lactate dehydrogenase for NADH produced by alcohol dehydrogenase, the effect of site-to-site orientation was studied. It was found that about 83% of the NADH produced by alcohol dehydrogenase was oxidized by site-to-site oriented lactate dehydrogenase compared to a figure of only about 61% obtained in an identical system of separate enzymes. This indicates that given two alternative routes, the preference for the one to lactate dehydrogenase over the one to lipoamide dehydrogenase is enhanced when lactate dehydrogenase and alcohol dehydrogenase are site-to-site oriented.     

A quantitative evaluation of the electrostatic theory for ion pair chromatography

Summary A quantitative model for ion pair chromatography based on the electrostatic theory is described. The model is based on the solution of the linearised Poisson-Boltzmann equation in a cylinder. The obtained equations are compared with experimental data from a number of different systems. The agreement between theory and experiments is satisfactorily. Systematic deviations due to the use of the linearised equation and ion correlation effects are discussed.     

A mussel tissue certified reference material for multiple phycotoxins. Part 3: homogeneity and stability

A candidate certified reference material (CRM) for multiple shellfish toxins (domoic acid, okadaic acid and dinophysistoxins, pectenotoxins, yessotoxin, azaspiracids and spirolides) has been prepared as a freeze-dried powder from mussel tissues (Mytilus edulis). Along with the certified values, the most important characteristics for a reference material to be fit-for-purpose are homogeneity and stability. Acceptable between-bottle homogeneity was found for this CRM. Within-bottle homogeneity was assessed using domoic acid, and it was shown that repeated subsampling of the CRM can be performed precisely down to 0.35 g. Both short- and long-term stability studies carried out under isochronous conditions demonstrated excellent stability of the various toxins present in the material. While degradation of some analytes was observed at +60°C in short-term studies, it was determined that shipping at ambient temperature is adequate. No instability was detected in long-term stability studies, and it was shown that the material can be held at +18°C safely for up to 1 year. To guarantee stability of the CRM over its lifetime the stock will be maintained at −20°C. The results of the homogeneity and stability testing show that CRM–FDMT1 is appropriate for its intended use in quality assurance and quality control of shellfish toxin analysis methods.     

Electron detachment dissociation of fluorescently labeled sialylated oligosaccharides

We explored the application of electron detachment dissociation (EDD) and infrared multiphoton dissociation (IRMPD) tandem mass spectrometry to fluorescently labeled sialylated oligosaccharides. Standard sialylated oligosaccharides and a sialylated N-linked glycan released from human transferrin were investigated. EDD yielded extensive glycosidic cleavages and cross-ring cleavages in all cases studied, consistently providing complementary structural information compared with infrared multiphoton dissociation. Neutral losses and satellite ions such as C-2H ions were also observed following EDD. In addition, we examined the influence of different fluorescent labels. The acidic label 2-aminobenzoic acid (2-AA) enhanced signal abundance in negative-ion mode. However, few cross-ring fragments were observed for 2-AA-labeled oligosaccharides. The neutral label 2-aminobenzamide (2-AB) resulted in more cross-ring cleavages compared with 2-AA-labeled species, but not as extensive fragmentation as for native oligosaccharides, likely resulting from altered negative charge locations from introduction of the fluorescent tag.     

On-line coupling of supercritical fluid extraction with high-performance liquid chromatography for the determination of explosives in vapour phases

An investigation into the selectivity of an iminodiacetic acid (IDA) modified silica gel column for transition and heavy metal ions using non-chelating inorganic eluents has been carried out. A number of eluent parameters were investigated to determine the exact retention mechanism taking place and to control selectivity. The parameters studied were eluent ionic strength and the nature of the inorganic salt used, eluent pH and eluent temperature. The results obtained showed how despite certain metal ions exhibiting similar stability constants with the bonded IDA groups, careful control of each of the above parameters, in particular eluent chloride ion concentration and eluent temperature, could result in large changes in selectivity. Optimal conditions for the isocratic and gradient separation of Mg(II), Ca(II), Mn(II), Cd(II), Co(II), Zn(II) and Pb(II) were determined. An isocratic method using a 0.035 M KCl, 0.065 M KNO3 (pH 2.5) eluent was successfully applied to the determination of Mn(II), Cd(II), Co(II) and Zn(II) at concentrations between 20 and 121 microg/l in a freshwater certified reference material (NIST 1640).     

Effects of Pressure Oscillations on Drainage in an Elastic Porous Medium

The effects of seismic stimulation on the flow of two immiscible fluids in an elastic synthetic porous medium is experimentally investigated. A wetting fluid is slowly evacuated from the medium, while a pressure oscillation is applied on the injected non- wetting fluid. The amplitude and frequency of the pressure oscillations as well as the evacuation speed are kept constant throughout an experiment. The resulting morphology of the invading structure is found to be strongly dependent on the interplay between the amplitude and the frequency of the applied pressure oscillations and the elasticity of the porous medium. Different combinations of these properties yield morphologically similar structures, allowing a classification of structures that is found to depend on a proposed dimensionless number.