The satellite-shaped Co-15 Polyoxotungstate, [Co6(H2O)30{Co9Cl2(OH)3(H2O)9(beta-SiW8O31)3}]5-

The 15-cobalt-substituted polyoxotungstate [Co(6)(H(2)O)(30){Co(9)Cl(2)(OH)(3)(H(2)O)(9)(beta-SiW(8)O(31))(3)}](5-) (1) has been characterized by single-crystal XRD, elemental analysis, IR, electrochemistry, magnetic measurements, and EPR. Single-crystal X-ray analysis was carried out on Na(5)[Co(6)(H(2)O)(30){Co(9)Cl(2)(OH)(3)(H(2)O)(9)(beta-SiW(8)O(31))(3)}].37H(2)O, which crystallizes in the hexagonal system, space group P6(3)/m, with a = 19.8754(17) A, b = 19.8754(17) A, c = 22.344(4) A, alpha= 90 degrees, beta = 90 degrees, gamma = 120 degrees, and Z = 2. The trimeric polyanion 1 has a core of nine Co(II) ions encapsulated by three unprecedented (beta-SiW(8)O(31)) fragments and two Cl(-) ligands. This central assembly {Co(9)Cl(2)(OH)(3)(H(2)O)(9)(beta-SiW(8)O(31))(3)}(17-) is surrounded by six antenna-like Co(II)(H(2)O)(5) groups resulting in the satellite-like structure 1. Synthesis of 1 is accomplished in a simple one-pot procedure by interaction of Co(II) ions with [gamma-SiW(10)O(36)](8-) in aqueous, acidic NaCl medium (pH 5.4). Polyanion 1 was studied by cyclic voltammetry as a function of pH. The current intensity of its Co(II) centers was compared with that of free Co(II) in solution. Our results suggest that 1 keeps its integrity in solution. Magnetic susceptibility results show the presence of both antiferro- and ferromagnetic coupling within the (Co(II))(9) core. A fully anisotropic Ising model has been employed to describe the exchange-coupling and yields g = 2.42 +/- 0.01, J(1) = 17.0 +/- 1.5 cm(-1), and J(2) = -13 +/- 1 cm(-(1). Variable frequency EPR studies reveal an anisotropic Kramer's doublet.     

Infrared spectra and relative stability of the F3CH/NH3 H-bonded complex in liquefied Xe

FTIR spectra of mixtures of fluoroform (F3CH) and ammonia (NH3), have been studied in liquid xenon between 5400 and 500 cm-1. Spectroscopic evidence for the formation of a hydrogen bonded complex has been found and the complexation enthalpy Delta(LXe)H degrees in the temperature interval between 173 and 215 K, was determined to be 14.4 (7) kJ mol-1. The parallel fundamentals nu1 and nu2 of ammonia reveal a strong narrowing effect upon complex formation, whereas the perpendicular fundamentals nu3 and nu4 show a modest decrease of their width. CP corrected ab initio calculations at the MP2(FULL)/6-311++G(3df,2pd) level predict a linear geometry for the complex, characterized by a small red shift of the CH stretch frequency of fluoroform. The ab initio interaction energy was found to be compatible with the isolated molecule complexation energy extrapolated from the experimental Delta(LXe)H degrees .     

Poly[3-(3,4-dihydroxyphenyl)glyceric acid] from Stems of <Emphasis Type="Italic">Symphytum asperum</Emphasis> and <Emphasis Type="Italic">S. caucasicum</Emphasis>

Two high-molecular-weight (>1000 kDa) water-soluble preparations were isolated from stems of Symphytum asperum and S. caucasicum. Their basic component was established as poly[hydroxy-1-carboxy-2-(3,4-dihydroxyphenyl)ethylene], analogous to that of high-molecular-weight (>1000 kDa) preparations from roots of these same plants, using IR and NMR spectral data. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 303–305, July–August, 2005. An erratum to this article is available at .     

Modular synthesis of block copolymers via cycloaddition of terminal azide and alkyne functionalized polymers

Polymeric building blocks containing terminal azide and alkyne functionalities are prepared via atom transfer radical polymerization (ATRP) and used to modularly synthesize block copolymers via 1,3-dipolar cycloaddition reactions, which are quantitative according to SEC measurements.     

Time-resolved fluorescence of the bacteriophage T4 capsid protein gp23

The time-resolved fluorescence properties of the bacteriophage T4 capsid protein gp23 are investigated. The structural characteristics of this protein are largely unknown and can be probed by recording time-resolved and decay-associated fluorescence spectra and intensity decay curves using a 200 ps-gated intensified CCD-camera. Spectral and decay data are recorded simultaneously, which makes data acquisition fast compared to time-correlated single-photon counting. A red-shift of the emission maximum within the first nanosecond of decay is observed, which can be explained by the different decay-associated spectra of fluorescence lifetimes of the protein in combination with dipolar relaxation. In addition, iodide quenching experiments are performed, to study the degree of exposure of the various tryptophan residues. A model for the origin of the observed lifetimes of 0.032 +/- 0.003, 0.39 +/- 0.06, 2.1 +/- 0.1 and 6.8 +/- 0.8 ns is presented: the 32 ps lifetime can be assigned to the emission of a buried tryptophan residue, the 0.4 and 2.1 ns lifetimes to two partly buried residues, and the 6.8 ns lifetime to a single tryptophan outside the bulk of the folded gp23.     

Molecular gradients: an efficient approach for optimizing the surface properties of biomaterials and biochips

A variety of molecular gradients of alkanethiols with the structure HS-(CH(2))(m)-X (m = 15; X = COOH, CH(2)NH(2), or CH(3)) and oligo(ethylene glycol)-terminated alkanethiols with the structures HS-(CH(2))(15)-CO-NH-Eg(n) (n = 2, 4, or 6), HS-(CH(2))(15)-CO-NH-Eg(2)-(CH(2))(2)-NH-CO-(CH(2))(4)-biotin, and HS-(CH(2))(15)-CO-NH-Eg(6)-CH(2)-COOH were prepared on polycrystalline gold films. These gradients were designed to serve as model surfaces for fundamental studies of protein adsorption and immobilization phenomena. Ellipsometry, infrared spectroscopy, and X-ray photoelectron spectroscopy, operating in scanning mode, were used to monitor the layer composition, gradient profiles, tail group conformation, and overall structural quality of the gradient assemblies. The gradient profiles were found to be 4-10 mm wide, and they increased in width with increasing difference in molecular complexity between the thiols used to form the gradient. The oligo(ethylene glycol) thiols are particularly interesting because they can be used to prepare so-called conformational gradients, that is, gradients that display a variation in oligo(ethylene glycol) chain conformation from all trans on the extreme Eg(2,4) sides, via an amorphous-like phase in the mixing regimes, to helical at the extreme Eg(6) sides. We demonstrate herein a series of experiments where the above gradients are used to evaluate nonspecific binding of the plasma protein fibrinogen, and in agreement with previous studies, the highest amounts of nonspecifically bound fibrinogen were observed on all-trans monolayers, that is, on the extreme Eg(2,4) sides. Moreover, gradients between Eg(2) and a biotinylated analogue have been prepared to optimize the conditions for the immobilization of streptavidin. Ellipsometry and infrared spectroscopy reveal high levels of immobilization over a fairly broad range of compositions in the gradient regime, with a maximum between 50 and 60% of the biotinylated analogue in the monolayer. A pI gradient composed of (NH(3)(+)/COO(-))-terminated thiols was also prepared and evaluated with respect to its ability to separate differently charged proteins, pepsin, and lysozyme, on a solid surface.     

Synthesis and properties of phenyl benzoate-based and biphenyl-based liquid crystalline thiol-ene monomers

Novel phenyl benzoate-based and biphenyl-based liquid crystalline thiol-ene monomers were synthesized and their properties investigated. By varying the bridging unit and spacer length, the type of mesophase can be tuned from the low ordered nematic and smectic A phase in the case of the phenyl benzoate-based monomers, to the highly ordered crystal E phase for the biphenyl-based monomers and their corresponding bromo precursors. We investigated the degree of order of the phenyl benzoate-based materials using the Haller method. Possible premature polymerization of these monomers was examined by size exclusion chromatography. The materials exhibit low transition temperatures and a high stability at typical handling times and temperatures. Consequently, these monomers are useful for in situ polymerization with anisotropic inert solvents, which could potentially lead to new architectures and enhanced electro-optical properties of devices. The use of the biphenyl-based monomers appears to be of limited use for polymerizations in anisotropic solution. However, as a result of their intrinsic high degree of molecular order, these monomers form a particularly interesting class of reactive materials that can be bulk polymerized to give main chain polymers with highly defined mechanical and optical or electro-optical properties.     

Hyphenation of optimized microfluidic sample preparation with nano liquid chromatography for faster and greener alkaloid analysis

A glass liquid–liquid extraction (LLE) microchip with three parallel 3.5 cm long and 100 μm wide interconnecting channels was optimized in terms of more environmentally friendly (greener) solvents and extraction efficiency. In addition, the optimized chip was successfully hyphenated with nano-liquid chromatography with ultraviolet and mass spectrometric detection (nanoLC–UV–MS) for on-line analysis. In this system, sample pretreatment, separation and detection are integrated, which significantly shortens the analysis time, saves labor and drastically reduces solvent consumption. Strychnine was used as model analyte to determine the extraction efficiency of the optimized 3-phase chip. Influence of organic solvent, pH of feed phase, type of alkaloid, and flow rates were investigated. The results demonstrated that the 3-phase chip nanoLC–UV/MS hyphenation combines rapid (∼25 s) and efficient (extraction efficiency >90%) sample prep, with automated alkaloid analyses. The method was applied to real samples including Strychnos nux-vomica seeds, Cephaelis ipecacuanha roots, Atropa belladonna leaves, and Vinca minor leaves.