A methodology for the preparation of self-standing 100–200 nm thick mesoporous silica membrane interconnects is reported. Interconnects may become an important component in future microfluidic device technology since it allows extension of microfluidic architectures into the third dimension. The silica film was mechanically supported by a perforated silicon nitride microsieve and covered a hexagonal array of 500 nm-sized holes. The potential applicability of these films as gateable interconnects for controlled dosing of ions was demonstrated. The permeability of ionic species can be controlled by the ionic strength. 相似文献
Chloride is a crucial anion for various analytical applications from biological to environmental applications. In order to measure the chloride ion concentration, a measurement system is needed which can detect this concentration for prolonged times reliably. Chronopotentiometry is a technique which does not need a long term stable reference electrode and is therefore very suitable for prolonged ion concentration measurements. As the used electrode might be fouled by reaction products, this work focuses on a chronopotentiometric approach with a separated sensing electrode (sensor) and actuating electrode (actuator). Both actuation and sensor electrode are made of Ag/AgCl. A constant current is applied to the actuator and will start the reaction between Ag and Clˉ, while the resulting Clˉ ion concentration change is observed through the sensor, which is placed close to the actuator. The time it takes to locally deplete the Clˉ ions is called transition time. Experiments were performed to verify the feasibility of this approach. The performed experiments show that the sensor detects the local concentration changes resulting from the current applied to the actuator. A linear relation between the Clˉ ion concentration and the square root of the transition time was observed, just as was predicted by theory. The calibration curves for different chips showed that both a larger sensor and a larger distance between sensor and actuator resulted in a larger time delay between the transition time detected at the actuator and the sensor. 相似文献
Linear poly(4‐tert‐butoxystyrene)‐b‐poly(4‐vinylpyridine) (PtBOS‐b‐P4VP) diblock copolymers are synthesized using reversible addition–fragmentation chain transfer polymerization. The self‐assembly of four different PtBOS‐b‐P4VP diblock copolymers is studied using small‐angle X‐ray scattering and transmission electron microscopy and a number of interesting observations are made. A tBOS62‐b‐4VP28 diblock copolymer with a weight fraction P4VP of 0.21 shows a disordered morphology of P4VP spheres with liquid‐like short‐range order despite an estimated value of of the order of 50. Increasing the length of the 4VP block to tBOS62‐b‐4VP199 results in a diblock copolymer with a weight fraction P4VP of 0.66. It forms a remarkably well‐ordered lamellar structure. Likewise, a tBOS146‐b‐4VP120 diblock copolymer with a weight fraction P4VP of 0.33 forms an extremely well‐ordered hexagonal structure of P4VP cylinders. Increasing the P4VP block of this block copolymer to tBOS146‐b‐4VP190 with a weight fraction P4VP of 0.44 results in a bicontinuous gyroid morphology despite the estimated strong segregation of . These results are discussed in terms of the architectural dissimilarity of the two monomers, characterized by the presence of the large side group of PtBOS, and the previously reported value of the interaction parameter, , for this polymer pair.
OBJECTIVE: Evaluation of the costs, effects and savings of three strategies for female fragile X premutation and full mutation carrier screening in the general population. METHODS: We calculated the costs, effects and savings by using a general model for prenatal, preconceptional, and school carrier screening. Assumptions were based on literature data, expert opinions, prices and tariffs. RESULTS: Prenatal screening will detect most carriers and will lead to the highest number of avoided fragile X syndrome patients. The costs per detected carrier are quite similar for all screening programmes (around USD 45,000). All screening strategies have a favourable cost-savings balance (USD 14 million for prenatal screening, USD 9 million for preconceptional screening and USD 2 million for school screening). CONCLUSIONS: From an economic point of view, there is no obstacle to fragile X screening. The decision to screen or not can (and should) therefore concentrate on discussion of medical, social, psychological and ethical considerations. 相似文献
A simple and cost-effective methodology for large-area micrometer-scale patterning of a wide range of metallic and oxidic functional materials is presented. Self-assembled monolayers (SAM) of alkyl thiols on Au were micropatterned by channel-diffused oxygen plasma etching, a method in which selected areas of SAM were protected from plasma oxidation via a soft lithographic stamp. The patterned SAMs were used as templates for site-selective electrodeposition, electroless deposition and solution-phase deposition of functional materials such as ZnO, Ni, Ag thin films, and ZnO nanowires. The patterned SAMs and functional materials were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), and tunneling AFM (TUNA). 相似文献
We present a general methodology to pattern functional materials on the nanometer scale using self-assembled molecular templates on conducting substrates. A soft lithographic gas phase edge patterning process using poly(dimethylsiloxane) molds was employed to form electrically isolating organosilane patterns of a few nanometer thickness and a line width that could be tuned by varying the time of deposition. Electrodeposition was employed to deposit patterns of Ni and ZnO on these prepatterned substrates. Deposition occurred only on patches of the substrate where no organosilane monolayer was present. The process is simple, inexpensive, and scalable to large areas. We achieved formation of metallic and oxide material patterns with a lateral resolution of 80 nm. 相似文献
The first well-defined iron-based catalyst system for the reduction of nitroarenes to anilines has been developed applying formic acid as reducing agent. A broad range of substrates including other reducible functional groups were converted to the corresponding anilines in good to excellent yields at mild conditions. Notably, the process constitutes a rare example of base-free transfer hydrogenations. 相似文献