Synthesis of statistical glycidyl methacrylate‐n‐vinyl pyrrolidone copolymers and their reaction with naproxen

Free‐radical copolymerization of glycidyl methacrylate (GMA) with N‐vinylpyrrolidone (VPD) was carried out at 50 °C using 3.0 mol · L^?1 of N,N′‐dimethylformamide solution and 9.0 · 10^?3 mol · L^?1 of 2,2′‐azobisisobutyronitrile as an initiator. The modification reaction of GMA‐VPD copolymers with a model bioactive carboxylic acid, 6‐methoxy‐α‐methyl‐2‐naphthaleneacetic acid (naproxen), was studied in the homogeneous phase using basic catalysts. The influence of the type of catalyst and the GMA content was evaluated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1192–1199, 2002     

Interaction of UO2 2+ with sodium dodecyl sulfate micelles: association of phenols to micelles through fluorescence quenching data

Time-resolved laser-induced fluorescence (TRLIF) has been used to study the interaction of uranyl ion with sodium dodecyl sulfate (SDS) micelles in H(3)PO(4) 1 M. The titration curve consists of two curved regions with different slopes, one of them more pronounced at low concentration of SDS and the other, with a less pronounced positive slope at larger [SDS] until a plateau is reached. The fluorescence quenching of uranyl ion by para-substituted phenol compounds was studied by TRLIF and steady-state emission intensity measurements. The results were interpreted in terms of binding of phenolic compounds to the micelle. The binding constant (K(Q)) as well as the entrance and exit rate constants were determined for all the quenchers used.     

Printable Bioelectronics To Investigate Functional Biological Interfaces

Thin‐film transistors can be used as high‐performance bioelectronic devices to accomplish tasks such as sensing or controlling the release of biological species as well as transducing the electrical activity of cells or even organs, such as the brain. Organic, graphene, or zinc oxide are used as convenient printable semiconducting layers and can lead to high‐performance low‐cost bioelectronic sensing devices that are potentially very useful for point‐of‐care applications. Among others, electrolyte‐gated transistors are of interest as they can be operated as capacitance‐modulated devices, because of the high capacitance of their charge double layers. Specifically, it is the capacitance of the biolayer, being lowest in a series of capacitors, which controls the output current of the device. Such an occurrence allows for extremely high sensitivity towards very weak interactions. All the aspects governing these processes are reviewed here.     

Analysis of multi-class preservatives in leave-on and rinse-off cosmetics by matrix solid-phase dispersion

Matrix solid-phase extraction has been successfully applied for the determination of multi-class preservatives in a wide variety of cosmetic samples including rinse-off and leave-on products. After extraction, derivatization with acetic anhydride, and gas chromatography–mass spectrometry analysis were performed. Optimization studies were done on real non-spiked and spiked leave-on and rinse-off cosmetic samples. The selection of the most suitable extraction conditions was made using statistical tools such as ANOVA, as well as factorial experimental designs. The final optimized conditions were common for both groups of cosmetics and included the dispersion of the sample with Florisil (1:4), and the elution of the MSPD column with 5 mL of hexane/acetone (1:1). After derivatization, the extract was analyzed without any further clean-up or concentration step. Accuracy, precision, linearity and detection limits were evaluated to assess the performance of the proposed method. The recovery studies on leave-on and rinse-off cosmetics gave satisfactory values (>78% for all analytes in all the samples) with an average relative standard deviation value of 4.2%. The quantification limits were well below those set by the international cosmetic regulations, making this multi-component analytical method suitable for routine control. The analysis of a broad range of cosmetics including body milk, moisturizing creams, anti-stretch marks creams, hand creams, deodorant, shampoos, liquid soaps, makeup, sun milk, hand soaps, among others, demonstrated the high use of most of the target preservatives, especially butylated hydroxytoluene, methylparaben, propylparaben, and butylparaben.     

SOLVENT EFFECTS ON THE TAUTOMERIZATION OF 5′-DEOXYPYRIDOXAL. A PHOTOPHYSICAL STUDY

Abstract— Absorption and fluorescence spectra of 5′-deoxypyridoxal (DPL) in various pure solvents and mixtures were recorded both at room temperature and over the range10–65°C. The areas under the absorption bands were analyzed to obtain the mole fraction (f_N, f_z) of two tautomers (the zwitterionic, Z, and neutral, N, forms) in the ground state. The following spectral parameters were determined from the fluorescence spectra: Stokes shift (Δv), fluorescence quantum yield of the neutral form (Q_N), fluorescence ratio of the neutral to the zwitterionic form (ø_N/ø_Z) and the rate constant of tautomerization (k₁) from Z to N in the excited state. Some of these parameters (f_N, Δv, Q_N, k₁) were found to depend on the proton donor character of the solvent, whereas others (ø_N/ø_Z) depended on its dipole moment. Thus, the absorption and fluorescence spectra of DPL allow one to obtain information on the polarity and the concentration of –OH groups on its environment.     

Multiresidue method for the fast determination of pesticides in nutraceutical products (Camellia sinensis) by GC coupled to triple quadrupole MS

A method based on QuEChERS (quick, easy, cheap, effective, rugged, and safe) has been developed and validated for the determination and quantification of more than 140 pesticides in nutraceutical products obtained from green tea (Camellia sinensis). Extraction was performed with acidified acetonitrile (acetic acid 1%, v/v) and a clean‐up step using primary secondary amine (50 mg), graphitized black carbon (100 mg) and magnesium sulfate (200 mg) was needed. Pesticide determination was achieved utilizing GC coupled to triple quadrupole MS/MS using the selective‐reaction monitoring mode. The total run time was 23 min. Pesticides were quantified using matrix‐matched calibration. Recoveries ranged from 70 to 120% and relative SD was lower than 25% at 10, 50, and 100 μg/kg. LOQs were lower than 10 μg/kg. 148 pesticides were validated. The validated method was applied to commercial nutraceutical products, detecting 4,4‐dichlorobenzophenone (28 μg/kg), o,p′‐dicofol (38 μg/kg) and p,p‐dicofol (44 μg/kg) in a few samples.     

Surface films of short fluorocarbon-hydrocarbon diblocks studied by molecular dynamics simulations: Spontaneous formation of elongated hemimicelles

Using grazing incidence small-angle X-ray scattering (GISAXS), and atomic force microscopy (AFM) it has been recently demonstrated that linear fluorocarbon-hydrocarbon diblocks (FnHm) self-assemble in water/air interfaces forming elongated and circular hemimicelles. Those structures have been observed for diblocks with at least eight fluorinated carbons. Based on the lack of a collapse pressure for F6H16, and due to the fact that no stable surface pressure values are reached under compression, it has been concluded that these molecules do not form stable monolayers. It has been also suggested that F6H16 and shorter diblocks desorb from the water surface under compression. It is not easy to accept that a significant concentration of so hydrophobic molecules can be stable in aqueous solution even when the employed experimental techniques were not able to clearly detect a well defined structure on the interface. In the present work the adsorption and arrangement of F6H16 and F6H10 at the water surface are studied by molecular dynamics (MD) simulations as a function of the available area per molecule. Starting from a random mixture, the spontaneous formation of elongated hemimicelles is observed for both systems when the area per molecule is higher than approximately 50 A(2). For intermediate areas two pseudo-phases, one rich in hydrocarbons and the other with higher fluorocarbon concentration, are formed. For the systems with less than approximately 30 A(2) available per molecule the formation of multilayers is observed. This is the first time that the dynamics and structure of perfluoroalkane (PFA) films, and in particular of hemimicelles on a liquid surface, are observed and characterized at atomic level.     

Application of the aza-Wittig reaction to the synthesis of pyrazinothienotriazolopyrimidinones: a new tetracyclic ring system

A simple one-pot and efficient method is described for the synthesis of pyrazinothienopyrimidines 6 by domino processes involving aza-Wittig/intermolecular nucleophilic addition/intramolecular cyclization. A tandem aza-Wittig reaction of phosphazenes 7, derived from 6, with heterocumulenes (isocyanates, carbon disulfide or carbon dioxide) generates the pyrazinothienotriazolopyrimidinones 9, 11 and 12, respectively. Pyrazino[2′,3′:4,5]thieno[3,2-d]-1,2,4-triazolo[1,5-a]pyrimidin-4(3H)-ones 15 and bis(pyrazinothienotriazolopyrimidinones) 17 were synthesized by the intermolecular aza-Wittig reaction of phosphazenes 7 with acyl chlorides or α,ω-dichlorides followed by heterocyclization via imidoyl chloride intermediate 16. Further S-alkylation of 11 and reaction of 6 with phosgeniminium chloride produce 2-alkylthio- and 2-N,N-dimethylaminopyrazinothienotriazolopyrimidinones 13 and 19, respectively.     

Simple modification of a protein database for mass spectral identification of N-linked glycopeptides

We describe an algorithm which modifies a protein database such that during a database search deamidation is limited to asparagines strictly contained within the N-glycosylation consensus sequence. The modified database was evaluated using a dataset created from the shotgun proteomic analysis of N-linked glycopeptides from human blood serum. We demonstrate that the application of the modified database eliminates incorrect glycopeptide assignments, reduces the peptide false-discovery rate, and eliminates the need for manual validation of glycopeptide identifications.