On the Effect of Secondary Nucleation on Deracemization through Temperature Cycles

Herein, the pivotal role of secondary nucleation in a crystallization-enhanced deracemization process is reported. During this process, complete and rapid deracemization of chiral conglomerate crystals of an isoindolinone is attained through fast microwave-assisted temperature cycling. A parametric study of the main factors that affect the occurrence of secondary nucleation in this process, namely agitation rate, suspension density, and solute supersaturation, confirms that an enhanced stereoselective secondary nucleation rate maximizes the deracemization rate. Analysis of the system during a single temperature cycle showed that, although stereoselective particle production during the crystallization stage leads to enantiomeric enrichment, undesired kinetic dissolution of smaller particles of the preferred enantiomer occurs during the dissolution step. Therefore, secondary nucleation is crucial for the enhancement of deracemization through temperature cycles and as such should be considered in further design and optimization of this process, as well as in other temperature cycling processes commonly applied in particle engineering.     

Understanding the acceleration in the ring-opening of lactones delivered by microwave heating

This paper reports the first detailed study focussed upon identifying the influence that microwave heating (MWH) has upon the mechanic steps involved in the tin catalysed ring-opening of lactones such as ?-caprolactone (CL). Direct comparison of conventional (CH) and microwave (MWH) heated kinetic studies showed that a key factor in the reduction of the polymerisation cycle time with MWH was the elimination of the induction period associated with in situ catalyst manufacture and initiation. NMR studies demonstrated that the most significant mechanistic change contributing to the observed induction time reduction/elimination was faster initiation (i.e., reaction of the initiatior/catalyst complex with the first monomer unit). Consequently, analysis of the dielectric properties of the reaction components predicted that this MWH induced change was related to the selective volumetric heating of both the catalyst and the monomer. Furthermore, this indication of the greater significance of the initiation step in defining the length of the induction period suggests that this is the rate determining step of the process, whether conducted by CH or MWH. Increasing the catalyst concentration was demonstrated to produce significant reductions in reaction heat-up time and to induce a significant (up to 30 °C) overshoot in reaction mixture bulk temperature in with MWH only. Thus supporting the conclusion that selective heating of the organometallic species in the system contributes directly to differences in the reaction conditions and which need to be taken into account when drawing comparisons with CH systems. Consequently, both effects were concluded to be thermally generated from selective volumetric heating.     

Heart Failure and PAHs,OHPAHs, and Trace Elements Levels in Human Serum: Results from a Preliminary Pilot Study in Greek Population and the Possible Impact of Air Pollution

Cardiovascular diseases (CVDs) have been associated with environmental pollutants. The scope of this study is to assess any potential relation of polycyclic aromatic hydrocarbons (PAHs), their hydroxylated derivatives, and trace elements with heart failure via their direct determination in human serum of Greek citizens residing in different areas. Therefore, we analyzed 131 samples including cases (heart failure patients) and controls (healthy donors), and the respective demographic data were collected. Significantly higher concentrations (p < 0.05) were observed in cases’ serum regarding most of the examined PAHs and their derivatives with phenanthrene, fluorene, and fluoranthene being the most abundant (median of >50 μg L⁻¹). Among the examined trace elements, As, Cd, Cu, Hg, Ni, and Pb were measured at statistically higher concentrations (p < 0.05) in cases’ samples, with only Cr being significantly higher in controls. The potential impact of environmental factors such as smoking and area of residence has been evaluated. Specific PAHs and trace elements could be possibly related with heart failure development. Atmospheric degradation and smoking habit appeared to have a significant impact on the analytes’ serum concentrations. PCA–logistic regression analysis could possibly reveal common mechanisms among the analytes enhancing the hypothesis that they may pose a significant risk for CVD development.     

Fe(II) Spin Crossover/Polymer Hybrid Materials: Investigation of the SCO Behavior via Temperature-Dependent Raman Spectroscopy,Physicochemical Characterization and Migration Release Study

Polymeric composites constitute an appealing class of materials with applications in various fields. Spin crossover (SCO) coordination complexes are switchable materials with potential use in data storage and sensors. Their incorporation into polymers can be considered an effective method for their wider practical application. In this study, Fe(II) SCO/polylactic acid hybrid polymeric composites have been prepared by film casting. The mononuclear coordination complex [Fe{N(CN)₂}₂(abpt)₂] was incorporated into polylactic acid. The morphological, structural and thermoanalytical characterization of the composite films were performed via scanning electron microscopy (SEM), attenuated total reflectance (ATR/FTIR), Raman spectroscopy and differential scanning calorimetry (DSC). In addition, the migration release study (MRS) of the SCO compound from the polymeric matrix into the food simulant 50% v/v water/ethanol solution was also examined via UV/Vis absorption. Of particular interest was the investigation of the SCO behavior of the coordination complex after its incorporation into the polymer matrix; it was accomplished by temperature-dependent micro-Raman spectroscopy. The described attempt could be considered a preparatory step toward the development of SCO-based temperature sensors integrated into food packaging materials.     

Synthesis of a Novel Chitosan/Basil Oil Blend and Development of Novel Low Density Poly Ethylene/Chitosan/Basil Oil Active Packaging Films Following a Melt-Extrusion Process for Enhancing Chicken Breast Fillets Shelf-Life

An innovative process for the adsorption of the hydrophobic Basil-Oil (BO) into the hydrophilic food byproduct chitosan (CS) and the development of an advanced low-density polyethylene/chitosan/basil-oil (LDPE/CS_BO) active packaging film was investigated in this work. The idea of this study was the use of the BO as both a bioactive agent and a compatibilizer. The CS was modified to a CS_BO hydrophobic blend via a green evaporation/adsorption process. This blend was incorporated directly in the LDPE to produce films with advanced properties. All the obtained composite films exhibited improved packaging properties. The film with 10% CS_BO content exhibited the best packaging properties, i.e., 33.0% higher tensile stress, 31.0% higher water barrier, 54.3% higher oxygen barrier, and 12.3% higher antioxidant activity values compared to the corresponding values of the LDPE films. The lipid oxidation values of chicken breast fillets which were packaged under vacuum using this film were measured after seven and after fourteen days of storage. These values were found to be lower by around 41% and 45%, respectively, compared with the corresponding lipid oxidation values of pure LDPE film.     

Operational risk: Emerging markets,sectors and measurement

The role of decision support systems in mitigating operational risks in firms is well established. However, there is a lack of investment in decision support systems in emerging markets, even though inadequate operational risk management is a key cause of discouraging external investment. This has also been exacerbated by insufficient understanding of operational risk in emerging markets, which can be attributed to past operational risk measurement techniques, limited studies on emerging markets and inadequate data.     

A New Approach for the Photosynthetic Antenna–Reaction Center Complex with a Model Organized Around an s‐Triazine Linker

Two new artificial mimics of the photosynthetic antenna‐reaction center complex have been designed and synthesized (BDP‐H₂P‐C₆₀ and BDP‐ZnP‐C₆₀). The resulting electron‐donor/acceptor conjugates contain a porphyrin (either in its free‐base form (H₂P) or as Zn‐metalated complex (ZnP)), a boron dipyrrin (BDP), and a fulleropyrrolidine possessing, as substituent of the pyrrolidine nitrogen, an ethylene glycol chain terminating in an amino group C₆₀‐X‐NH₂ (X=spacer). In both cases, the three different components were connected by s‐triazine through stepwise substitution reactions of cyanuric chloride. In addition to the facile synthesis, the star‐type arrangement of the three photo‐ and redox‐active components around the central s‐triazine unit permits direct interaction between one another, in contrast to reported examples in which the three components are arranged in a linear fashion. The energy‐ and electron‐transfer properties of the resulting electron‐donor/acceptor conjugates were investigated by using UV/Vis absorption and emission spectroscopy, cyclic voltammetry, and femtosecond transient absorption spectroscopy. Comparison of the absorption spectra and cyclic voltammograms of BDP‐H₂P‐C₆₀ and BDP‐ZnP‐C₆₀ with those of BDP‐H₂P, BDP‐ZnP and BDP‐C₆₀, which were used as references, showed that the spectroscopic and electrochemical properties of the individual constituents are basically retained, although some appreciable shifts in terms of absorption indicate some interactions in the ground state. Fluorescence lifetime measurements and transient absorption experiments helped to elucidate the antenna function of BDP, which upon selective excitation undergoes a rapid and efficient energy transfer from BDP to H₂P or ZnP. This is then followed by an electron transfer to C₆₀, yielding the formation of the singlet charge‐separated states, namely BDP‐H₂P ^.+‐ C₆₀ ^.? and BDP‐ZnP ^.+‐ C₆₀ ^{. ?}. As such, the sequence of energy transfer and electron transfer in the present models mimics the events of natural photosynthesis.