Enhancement of the Anti-Inflammatory Activity of NSAIDs by Their Conjugation with 3,4,5-Trimethoxybenzyl Alcohol

The synthesis of derivatives of three nonspecific COX-1 and COX-2 inhibitors, ibuprofen, ketoprofen, naproxen is presented. These acids were connected via an amide bond with an amino acid (L-proline, L-tyrosine, and beta-alanine) used as a linker. The amino acid carboxylic group was esterified with 3,4,5 trimethoxybenzyl alcohol. The activity of the novel derivatives was examined in vivo on carrageenan-induced inflammation, and in vitro, as cyclooxygenase and lipoxygenase inhibitors. It was found that the new compounds were more potent anti-inflammatory agents than the parent drugs. Thus, the ibuprofen (21) and ketoprofen (16) derivatives reduced rat paw edema by 67 and 91% (the reduction by the relevant NSAIDs was 36 and 47%, respectively). They inhibited COX-2 more than the starting drugs (21 by 67%, ibuprofen 46%, 19 by 94%, ketoprofen 49%). Docking of compounds on the active sites of COX-1 and COX-2 reflects their in vitro activity. Thus, 19 adopts an unfavorable orientation for COX-1 inhibition, but it binds effectively in the binding pocket of COX-2, in agreement with the absence of activity for COX-1 and the high inhibition of COX-2. In conclusion, the performed structural modifications result in the enhancement of the anti-inflammatory activity, compared with the parent NSAIDs.     

A study of properties of adaptive quadratic grids for three-dimensional near-surface field computations

Curved geometries and the corresponding near-surface fields typically require a large number of linear computational elements. High-order numerical solvers have been primarily used with low-order meshes. There is a need for curved, high-order computational elements. Typical near-surface meshes consist of hexahedral and/or prismatic elements. The present work studies the employment of quadratic meshes that are relatively coarse for field simulations. Directionally quadratic high-order elements are proposed for the near-surface field regions. The quadratic meshes are compared with the conventional low-order ones in terms of accuracy and efficiency. The cases considered include closed surface volume calculations, as well as computation of gradients of several analytic fields. A special method of adaptive local quadratic meshes is proposed and evaluated. Truncation error analysis for quadratic grids yields comparison with the conventional linear hexahedral/prismatic meshes, which are subject to typical distortions such as stretching, skewness, and torsion.     

Employing (half-)titanocene complexes as initiators for the synthesis of end-functionalized polylactides by coordination polymerization

Seven (half-)titanocene alkoxide complexes, [Cp₂TiCl(OEt)], [Cp₂TiCl(O-2-Bu)], [Cp₂TiCl(OCH₂CF₂CF₂H)], [CpTiCl₂(OEt)], [CpTiCl₂(O-(S)-2-Bu)], [CpTiCl₂(OCH₂CF₃)], and [Cp₂TiCl(OCH₂CF₃)], were synthesized and employed in lactide coordination polymerization. These organotitanium (IV) compounds proved to be very efficient initiators for the ring-opening polymerization of enantiomeric l -lactide and racemic mixture of rac-lactide, leading to end-functionalized polymers. Kinetic studies illustrated that these compounds produce well-defined polymers in a controlled manner. This was further demonstrated by synthesizing poly(l -lactide-b-hexyl isocyanate) diblock copolymer. The effect of the alkoxy end groups on the thermal behavior of the polymers was also studied by thermogravimetric analysis and differential scanning calorimetry. The polymers were characterized using size exclusion chromatography and proton nuclear magnetic resonance spectroscopy. The optical properties of the diblock copolymer were also investigated. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2192–2202     

Darboux Transformation for the Vector Sine-Gordon Equation and Integrable Equations on a Sphere

We propose a method for construction of Darboux transformations, which is a new development of the dressing method for Lax operators invariant under a reduction group. We apply the method to the vector sine-Gordon equation and derive its Bäcklund transformations. We show that there is a new Lax operator canonically associated with our Darboux transformation resulting an evolutionary differential-difference system on a sphere. The latter is a generalised symmetry for the chain of Bäcklund transformations. Using the re-factorisation approach and the Bianchi permutability of the Darboux transformations, we derive new vector Yang–Baxter map and integrable discrete vector sine-Gordon equation on a sphere.     

Use of monomer fraction data in the parametrization of association theories

Association theories such as the CPA (cubic-plus-association), NRHB (non-random hydrogen bonding) equations of state and the various variants of SAFT (statistical associating fluid theory) have been extensively applied to phase equilibrium calculations. Such models can also be used for estimating the monomer fraction of hydrogen bonding compounds and their mixtures. Monomer fraction data are obtained from spectroscopic measurements and they are available for a few compounds such as pure water and alcohols as well as for some alcohol–alkane and similar mixtures. These data are useful for an understanding of the capabilities and limitations of association models. The purpose of this work is two-fold: (i) to compare the performance of three models, CPA, NRHB and sPC-SAFT, in predicting the monomer fraction of water, alcohols and mixtures of alcohol-inert compounds and (ii) to investigate whether “improved” model parameters can be obtained if monomer fraction data are included in the parameter estimation together with vapor pressures and liquid densities. The expression “improved” implies parameters which can represent several pure compound properties as well as monomer fraction data for pure compounds and mixtures. The accuracy of experimental monomer fraction data is discussed, as well as the role of monomer fraction data in clarifying which association scheme should be used in these equations of state. The results reveal that the investigated association models (CPA, sPC-SAFT and NRHB) can predict, at least qualitatively correct, monomer fractions of associating compounds and mixtures. Only, small differences are observed between the models. In addition, it has been shown that, using a suitable association scheme, a single set of parameters can describe satisfactorily vapor pressures, liquid densities and monomer fractions of water and alcohols. The 4C scheme is the best choice for water, while for methanol there is small difference between the 2B and 3B association schemes.     

Removing ruthenium residues from olefin metathesis reaction products

Olefin metathesis has revolutionized the way chemists design and synthesize molecules, mostly due to the development of well-defined ruthenium catalysts with high oxygen-, moisture-, and functional-group tolerance. However, the complete removal of residual ruthenium after the end of a metathesis reaction often imposes significant challenges. This Minireview summarizes the strategies for the sequestration of ruthenium impurities from olefin metathesis post-reaction mixtures, thus comprising a practical guide for synthetic chemists employing ruthenium-catalyzed metathesis reactions in the synthesis of organic or polymeric materials.     

High‐Pressure Synthesis of a Nitrogen‐Rich Inclusion Compound ReN8⋅x N2 with Conjugated Polymeric Nitrogen Chains

A nitrogen‐rich compound, ReN₈?x N₂, was synthesized by a direct reaction between rhenium and nitrogen at high pressure and high temperature in a laser‐heated diamond anvil cell. Single‐crystal X‐ray diffraction revealed that the crystal structure, which is based on the ReN₈ framework, has rectangular‐shaped channels that accommodate nitrogen molecules. Thus, despite a very high synthesis pressure, exceeding 100 GPa, ReN₈?x N₂ is an inclusion compound. The amount of trapped nitrogen (x) depends on the synthesis conditions. The polydiazenediyl chains [?N=N?]_∞ that constitute the framework have not been previously observed in any compound. Ab initio calculations on ReN₈?x N₂ provide strong support for the experimental results and conclusions.     

Induced secondary metabolites from the endophytic fungus Aspergillus versicolor through bacterial co-culture and OSMAC approaches

Two new cryptic 3,4-dihydronaphthalen-(2H)-1-one (1-tetralone) derivatives, aspvanicin A (1) and its epimer aspvanicin B (2), as well as several known cryptic metabolites (3–8), were obtained from the ethyl acetate extract of the co-culture of the endophytic fungus Aspergillus versicolor KU258497 with the bacterium Bacillus subtilis 168 trpC2 on solid rice medium. When A. versicolor was cultured axenically in liquid Wickerham medium supplemented with 3.5% DMSO, an additional three known secondary metabolites (9–11) were isolated that were lacking when the fungus was fermented on rice medium. The structures of the new compounds were elucidated using one- and two-dimensional NMR spectroscopy as well as HRESIMS. The relative and absolute configurations of 1 and 2 were determined by the combination of NMR and electronic circular dichroism (ECD) analysis aided by DFT conformational analysis and TDDFT-ECD calculations. The ECD calculations revealed that although the sign of the blue-shifted overlapping n-π¹ ECD transition follows the helicity rule of cyclic aryl ketones, the calculation of low-energy conformers and ECD spectra was necessary to determine the stereochemistry. All metabolites were assessed for their antibacterial and cytotoxic activities; one of the new diastereomers, compound 2, showed moderate cytotoxic activity against the mouse lymphoma cell line L5178Y.     

HPLC study of the inhibiting effect of phosphate and bicarbonate buffers on the leaching pattern of dental resin composites

A high-performance liquid chromatographic method was applied to evaluate the effect of bicarbonate (NaHCO₃) and phosphate (NaH₂PO₄, Na₂HPO₄) buffers on monomer leachability of dental resin composites. Evetric was the restorative resin composite that was investigated in current study. Forty disk-shaped resin composite specimens (n?=?40) were immersed by means of a silk string in the following solutions: Distilled water (A), phosphate buffer (B), bicarbonate buffer (C), artificial saliva (D). After seven (7) and fourteen (14) days, the eluates were analyzed by means of High Performance Liquid Chromatography (HPLC). Subsequently, new specimens were fabricated and immersed in fresh solutions in which methanol 12% (v/v) was added. After seven and fourteen days of storage, the leaching of monomers was examined by means of HPLC, which was proved to be an effective tool to buffers demonstrate the inhibiting effect of phosphate and bicarbonate ions on the leaching pattern of dental resin composites.