The influence of water on the memory effect of the amylose tris(3,5-dimethylphenyl carbamate) stationary phase

Acid/base modifiers are sometimes used as additives in normal phase elution on columns packed with CHIRALPAK^® AD^®. These modifiers affect enantioseparations in ways that are not yet fully understood for the lack of systematic studies. Shifts of the selectivity of certain pairs of enantiomers upon exposure of the column to these modifiers is amply documented. Furthermore, once the modifier has been removed from the mobile phase, the modified selectivity remains, which has been named the Memory Effect. After a column has been exposed to an eluent stream containing acidic/basic modifiers, this particular column no longer separates certain enantiomeric pairs with the same selectivity as a modifier naive column. This makes the transfer of developed methods from one to other CHIRALPAK AD columns difficult to predict, if the selectivity needs to be similar between the two columns. We selected four enantiomeric pairs for a systematic study of this Memory Effect. The selectivity of 4-chlorophenylalanine ethyl ester improves after a solution of ethanesulfonic acid (ESA) is percolated through the column. The selectivity of Propranolol and Tröger's base increases after a solution of Diiospropylamine is percolated through the column. The selectivity of Propranolol and Tröger's base enantiomers is inversely affected by percolation of the acid solution. The 4-chlorophenylalanine ethyl ester enantiomers is inversely affected by percolation of the base solution. In contrast, the selectivity of trans-stilbene oxide (TSO) is not affected by either modifier. Analytical studies of the stationary phase suggest that slow protonation/deprotonation of water molecules attached to the carbamate moiety may be responsible for the acid/base Memory Effect. To further the understanding of the effect of water on the Memory Effect, mobile phases – spiked with water (0.01–0.43%) – were used to measure changes in the Memory Effect. Finally, we showed that the influence of water on the Memory Effect can be minimized by percolating through the column a sufficiently concentrated solution of the appropriate base while using dried mobile phases.     

Comparison of the sensitivity of 11 crosslinked hyaluronic acid gels to bovine testis hyaluronidase

Crosslinked hyaluronan gels are used in various applications where their stability is a prerequisite. The sensitivity of such gels to hyaluronidase can be determined as an index of stability by several approaches: chromatography, electrophoresis, and viscometry. We describe here a test based on the colorimetric determination of the N-acetyl-d-glucosamine released by hyaluronidase in standardized conditions. The sensitivities to bovine testicular hyaluronidase of 11 different gels used to fill skin wrinkles (Restylane; Perlane; Juvéderm 18, 24, 24HV, 30, and 30HV; Surgiderm 18, 24XP, 30, and 30XP) were compared.The method was reproducible, easy to perform, not time-consuming and allowed us to demonstrate that the sensitivity to testicular hyaluronidase was dependent on the degree of crosslinking of the gels and also on their monophasic/biphasic nature. Under our conditions, Surgiderm 30, 24XP and 30XP were the most resistant gels.We propose to retain the hyaluronidase test to predict the in situ stability of a crosslinked gel used to fill skin wrinkles.     

Discovery of a Highly Selective Glycogen Synthase Kinase‐3 Inhibitor (PF‐04802367) That Modulates Tau Phosphorylation in the Brain: Translation for PET Neuroimaging

Glycogen synthase kinase‐3 (GSK‐3) regulates multiple cellular processes in diabetes, oncology, and neurology. N‐(3‐(1H‐1,2,4‐triazol‐1‐yl)propyl)‐5‐(3‐chloro‐4‐methoxyphenyl)oxazole‐4‐carboxamide (PF‐04802367 or PF‐367) has been identified as a highly potent inhibitor, which is among the most selective antagonists of GSK‐3 to date. Its efficacy was demonstrated in modulation of tau phosphorylation in vitro and in vivo. Whereas the kinetics of PF‐367 binding in brain tissues are too fast for an effective therapeutic agent, the pharmacokinetic profile of PF‐367 is ideal for discovery of radiopharmaceuticals for GSK‐3 in the central nervous system. A ¹¹C‐isotopologue of PF‐367 was synthesized and preliminary PET imaging studies in non‐human primates confirmed that we have overcome the two major obstacles for imaging GSK‐3, namely, reasonable brain permeability and displaceable binding.     

Formation of Long,Multicenter π‐[TCNE]22− Dimers in Solution: Solvation and Stability Assessed through Molecular Dynamics Simulations

Purely organic radical ions dimerize in solution at low temperature, forming long, multicenter bonds, despite the metastability of the isolated dimers. Here, we present the first computational study of these π‐dimers in solution, with explicit consideration of solvent molecules and finite temperature effects. By means of force‐field and ab initio molecular dynamics and free energy simulations, the structure and stability of π‐[TCNE]₂^2? (TCNE=tetracyanoethylene) dimers in dichloromethane have been evaluated. Although the dimers dissociate at room temperature, they are stable at 175 K and their structure is similar to the one in the solid state, with a cofacial arrangement of the radicals at an interplanar separation of approximately 3.0 Å. The π‐[TCNE]₂^2? dimers form dissociated ion pairs with the NBu₄⁺ counterions, and their first solvation shell comprises approximately 20 CH₂Cl₂ molecules. Among them, the eight molecules distributed along the equatorial plane of the dimer play a key role in stabilizing the dimer through bridging C?H???N contacts. The calculated free energy of dimerization of TCNE ^{. ?} in solution at 175 K is ?5.5 kcal mol^?1. These results provide the first quantitative model describing the pairing of radical ions in solution, and demonstrate the key role of solvation forces on the dimerization process.     

Limits of the numerical estimation of the adsorption energy distribution from adsorption isotherm data using the expectation-maximization method

The limits of the use of the expectation-maximization (EM) method for the study of the heterogeneity of adsorbent surfaces were tested by calculating the adsorption energy distribution of systems having known degrees of heterogeneity. Connecting on-line two different columns allows the simulation of a heterogeneous system. The two columns used were endcapped, C(18)-bonded silica used as stationary phases and having different degrees of C(18) chain coverages (0.42 and 2.03 micromol/m(2)). The adsorption constants of phenol measured by frontal analysis (FA) are significantly different on these two columns. On each column, the adsorption behavior was best accounted for by a bi-Langmuir isotherm model, corresponding to a heterogeneous surface with a bimodal energy distribution. The difference between the adsorption energies on the weak adsorption sites of the two columns is 1.5 kJ/mol. The energy difference of their high energy sites is 2.2 kJ/mol. The EM method can readily distinguish between adsorption sites having energies that differ by more than 5 kJ/mol after more than 10 million iterations, but it cannot distinguish between adsorption sites for which this energy difference is less than 2 kJ/mol, even after 100 million iterations. For highly heterogeneous systems, (e.g., those with more than three different types of adsorption sites), the EM program does not converge necessarily towards the actual energy distribution function but toward a simpler one, having fewer adsorption sites that are almost equally spaced in the energy space. This failure of the EM program is related to the fact that, despite the excellent precision of the FA measurements (<1%), any series of adsorption data can be represented by several distinct AEDs. Thus, the degree of heterogeneity of RPLC adsorbents determined with the EM method might often be minimized, resulting in erroneous values of the isotherm parameters.     

Application of an in-line imprinted polymer column in a potentiometric flow-injection chemical sensor to the determination of the carbamate pesticide carbaryl in complex biological matrices

A flow-injection biosensor-like system based on a nonenzymatic approach has been developed to determine the carbamate pesticide carbaryl in complex biological samples without lengthy and expensive extraction steps. Molecularly imprinted polymeric beads were used to immobilize carbaryl from biological samples. pH variation permitted the elution of carbaryl from the binding cavity to the flow cell. A pH electrode was used to detect changes in the charge of carbaryl in the sample solution resulting from the protonation and deprotonation of the molecule over different pH ranges. At pH 2.0, the secondary amine group is protonated, giving a (+1) charge to the carbaryl molecule. At pH 8.0, the ionized carbaryl loses a proton to become neutral, changing the local pH of the flow cell. The pH change at the flow cell generated by the deprotonation of carbaryl ion in alkaline medium was used to determine the carbaryl concentration. Parameters influencing the performance of the system were optimized for use in the detection procedure. The validated biosensor-like system had a carbaryl detection limit of 10.0 μg/mL and a response that was linear (r ² > 0.98) over the concentration range of 10.0–00 μg/mL.     

A new insight into the understanding of the collapsed form of poly(N-isopropylacrylamide) molecules

Possible collapsed forms of poly(N-isopropylacrylamide) molecules are reviewed on the basis of first principle calculations. Various configurations and associated conformations are detailed. The calculated optimized structures exhibit different possibilities of creating networks of intra-molecular bonds of the hydrogen type. We show that the most remarkable one is able to form a local, self-saturated and well ordered helix. We also indicate in which direction the synthesis of the molecule should be oriented to improve its global behavior in term of hydrophobic/hydrophilic behavior.     

Anisotropic Lithium Ion Conductivity in Single‐Ion Diblock Copolymer Electrolyte Thin Films

Well‐defined single‐ion diblock copolymers consisting of a Li‐ion conductive poly(styrenesulfonyllithium(trifluoromethylsulfonyl)imide) (PSLiTFSI) block associated with a glassy polystyrene (PS) block have been synthesized via reversible addition fragmentation chain transfer polymerization. Conductivity anisotropy ratio up to 1000 has been achieved from PS‐b‐PSLiTFSI thin films by comparing Li‐ion conductivities of out‐of‐plane (aligned) and in‐plane (antialigned) cylinder morphologies at 40 °C. Blending of PS‐b‐PSLiTFSI thin films with poly(ethylene oxide) homopolymer (hPEO) enables a substantial improvement of Li‐ion transport within aligned cylindrical domains, since hPEO, preferentially located in PSLiTFSI domains, is an excellent lithium‐solvating material. Results are also compared with unblended and blended PSLiTFSI homopolymer (hPSLiTFSI) homologues, which reveals that ionic conductivity is improved when thin films are nanostructured.

     

High Temperature Behavior of a Gel-Derived SiOC Glass: Elasticity and Viscosity

The high temperature behavior of a sol-gel derived silicon oxycarbide glass containing 12 at.% carbon has been characterized by means of creep and in-situ ultrasonic echography measurements. Temperature induced changes include structural relaxation and densification from 1000 to 1200°C, and crystallization to form a fine and homogeneous -SiC/glass-matrix nanocomposite with 2.5 nm large crystals above 1200°C. Young's modulus measurements clearly reveal a consolidation of the material upon annealing below 1200°C. Crystallization is almost complete after few hours at 1300°C and results in a significant increase in Young's modulus. The viscosity of the oxycarbide glass is much higher than that of fused silica, with two orders of magnitude difference at 1200°C, and the glass transition temperature ranges from 1320 to 1370°C.     

A new route to vinyltributyltin compounds by flash pyrolysis of alkyltributyltin acetates

Flash pyrolysis of alkyltributyltin acetates, at high temperatures (600–850° C) under a moderate vacuum provides a convenient route to vinyltin derivatives.