Simultaneous determination of soluble manganese(III), manganese(II) and total manganese in natural (pore)waters

A new spectrophotometric protocol was developed for the simultaneous determination of soluble Mn(III), Mn(II) and total Mn [sum of soluble Mn(III) and Mn(II)] in sediment porewaters using a water soluble meso-substituted porphyrin [α,β,γ,δ-tetrakis(4-carboxyphenyl)porphine (T(4-CP)P)]. A simple kinetic rate model is used to quantify soluble Mn(II), Mn(III) and total Mn concentrations during a metal substitution reaction. Under optimized conditions, the method accurately determines soluble Mn(II) and Mn(III) within a concentration range of 100 nM-10 μM. The detection limit of total soluble Mn is 50 nM. Using this method, soluble Mn(II) and Mn(III) concentrations were determined in standard solutions within 0.4-2% of the known values and agreed closely with results of inductively coupled plasma mass spectrometric and voltammetric analyses. The procedure was successfully applied to determine soluble Mn(II), Mn(III) and total Mn in sediment porewaters of the Lower St. Lawrence Estuary. Mn(III) represented up to 85% of the total soluble Mn pool in surface sediments.     

Identification of a higher-order organozincate intermediate involved in Negishi cross-coupling reactions by mass spectrometry and NMR spectroscopy

Negishi cross-coupling reactions were analyzed in solution by mass spectrometry and NMR spectroscopy to identify both the effect of LiBr as an additive as well as the purpose of 3-dimethyl-2-imidazolidinone (DMI) as a co-solvent. The results suggest that the main role of DMI is to facilitate a higher order bromozincate formation during the addition of LiBr.     

Odd-even effects in charge transport across self-assembled monolayers

This paper compares charge transport across self-assembled monolayers (SAMs) of n-alkanethiols containing odd and even numbers of methylenes. Ultraflat template-stripped silver (Ag(TS)) surfaces support the SAMs, while top electrodes of eutectic gallium-indium (EGaIn) contact the SAMs to form metal/SAM//oxide/EGaIn junctions. The EGaIn spontaneously reacts with ambient oxygen to form a thin (～1 nm) oxide layer. This oxide layer enables EGaIn to maintain a stable, conical shape (convenient for forming microcontacts to SAMs) while retaining the ability to deform and flow upon contacting a hard surface. Conical electrodes of EGaIn conform (at least partially) to SAMs and generate high yields of working junctions. Ga(2)O(3)/EGaIn top electrodes enable the collection of statistically significant numbers of data in convenient periods of time. The observed difference in charge transport between n-alkanethiols with odd and even numbers of methylenes--the "odd-even effect"--is statistically discernible using these junctions and demonstrates that this technique is sensitive to small differences in the structure and properties of the SAM. Alkanethiols with an even number of methylenes exhibit the expected exponential decrease in current density, J, with increasing chain length, as do alkanethiols with an odd number of methylenes. This trend disappears, however, when the two data sets are analyzed together: alkanethiols with an even number of methylenes typically show higher J than homologous alkanethiols with an odd number of methylenes. The precision of the present measurements and the statistical power of the present analysis are only sufficient to identify, with statistical confidence, the difference between an odd and even number of methylenes with respect to J, but not with respect to the tunneling decay constant, β, or the pre-exponential factor, J(0). This paper includes a discussion of the possible origins of the odd-even effect but does not endorse a single explanation.     

A molecular half-wave rectifier

This paper describes the performance of junctions based on self-assembled monolayers (SAMs) as the functional element of a half-wave rectifier (a simple circuit that converts, or rectifies, an alternating current (AC) signal to a direct current (DC) signal). Junctions with SAMs of 11-(ferrocenyl)-1-undecanethiol or 11-(biferrocenyl)-1-undecanethiol on ultraflat, template-stripped Ag (Ag(TS)) bottom electrodes, and contacted by top electrodes of eutectic indium-gallium (EGaIn), rectified AC signals, while similar junctions based on SAMs of 1-undecanethiol-SAMs lacking the ferrocenyl terminal group-did not. SAMs in these AC circuits (operating at 50 Hz) remain stable over a larger window of applied bias than in DC circuits. AC measurements, therefore, can investigate charge transport in SAM-based junctions at magnitudes of bias inaccessible to DC measurements. For junctions with SAMs of alkanethiols, combining the results from AC and DC measurements identifies two regimes of bias with different mechanisms of charge transport: (i) low bias (|V| < 1.3 V), at which direct tunneling dominates, and (ii) high bias (|V| > 1.3 V), at which Fowler-Nordheim (FN) tunneling dominates. For junctions with SAMs terminated by Fc moieties, the transition to FN tunneling occurs at |V| ≈ 2.0 V. Furthermore, at sufficient forward bias (V > 0.5 V), hopping makes a significant contribution to charge transport and occurs in series with direct tunneling (V ? 2.0 V) until FN tunneling activates (V ? 2.0 V). Thus, for Fc-terminated SAMs at forward bias, three regimes are apparent: (i) direct tunneling (V = 0-0.5 V), (ii) hopping plus direct tunneling (V ≈ 0.5-2.0 V), and (iii) FN tunneling (V ? 2.0 V). Since hopping does not occur at reverse bias, only two regimes are present over the measured range of reverse bias. This difference in the mechanisms of charge transport at forward and reverse bias for junctions with Fc moieties resulted in large rectification ratios (R > 100) and enabled half-wave rectification.     

Simulating infrared spectra and hydrogen bonding in cellulose Iβ at elevated temperatures

We have modeled the transformation of cellulose Iβ to a high temperature (550 K) structure, which is considered to be the first step in cellulose pyrolysis. We have performed molecular dynamics simulations at constant pressure using the GROMOS 45a4 united atom forcefield. To test the forcefield, we computed the density, thermal expansion coefficient, total dipole moment, and dielectric constant of cellulose Iβ, finding broad agreement with experimental results. We computed infrared (IR) spectra of cellulose Iβ over the range 300-550 K as a probe of hydrogen bonding. Computed IR spectra were found to agree semi-quantitatively with experiment, especially in the O-H stretching region. We assigned O-H stretches using a novel synthesis of normal mode analysis and power spectrum methods. Simulated IR spectra at elevated temperatures suggest a structural transformation above 450 K, a result in agreement with experimental IR results. The low-temperature (300-400 K) structure of cellulose Iβ is dominated by intrachain hydrogen bonds, whereas in the high-temperature structure (450-550 K), many of these transform to longer, weaker interchain hydrogen bonds. A three-dimensional hydrogen bonding network emerges at high temperatures due to formation of new interchain hydrogen bonds, which may explain the stability of the cellulose structure at such high temperatures.     

Effective Hamiltonian for femtosecond vibrational dynamics

Time propagation of zero-order states of an effective spectroscopic Hamiltonian is tested against femtosecond time dependent dynamics of adiabatic wavepackets evolving on a model potential energy surface for two coupled modes of the radical HO(2) with multiple potential wells and above barrier motion. A generalized Hamiltonian which breaks the usual conserved polyad action by including extra resonance couplings (V(2:1) and V(3:1)) successfully describes the time evolution after the further addition of two "ultrafast" couplings. These new couplings are a nonresonant coupling a(1)a(2)+a(1)(?)a(2)(?) and a resonant coupling V(1:1) that functions as an ultrafast term because the system is far from 1:1 frequency resonance.     

Communication: Identification of the molecule-metal bonding geometries of molecular nanowires

Molecular nanowires in which a single molecule bonds chemically to two metal electrodes and forms a stable electrically conducting bridge between them have been studied intensively for more than a decade. However, the experimental determination of the bonding geometry between the molecule and electrodes has remained elusive. Here we demonstrate by means of ab initio calculations that inelastic tunneling spectroscopy (IETS) can determine these geometries. We identify the bonding geometries at the gold-sulfur interfaces of propanedithiolate molecules bridging gold electrodes that give rise to the specific IETS signatures that were observed in recent experiments.     

Quality by design (QbD) based development of a stability indicating HPLC method for drug and impurities

In this paper, an application of Quality by Design (QbD) concepts to the development of a stability indicating HPLC method for a complex pain management drug product containing drug substance, two preservatives, and their degradants is described. The QbD approach consisted of (i) developing a full understanding of the intended purpose, (ii) developing predictive solutions, (iii) designing a meaningful system suitability solution that helps to identify failure modes, and (iv) following design of experiments (DOE) approach. The starting method lacked any resolution among drug degradant and preservative oxidative degradant peaks, and peaks for preservative and another drug degradant. The method optimization was accomplished using Fusion AE? software (S-Matrix Corporation, Eureka, CA) that follows a DOE approach. Column temperature (50 ± 5°C), mobile phase buffer pH (2.9 ± 0.2), initial % acetonitrile (ACN, 2 ± 1%), and initial hold time (2.5, 5, or 10 min) of the HPLC method were simultaneously studied to optimize separation of the unresolved peaks. The optimized HPLC conditions (column temperature of 50°C, buffer pH of 3.1, 3% initial ACN with 2.5 min initial hold) resulted in fully resolved peaks in the two critical pairs. The QbD based method development helped in generating a design space and operating space with knowledge of all method performance characteristics and limitations and successful method robustness within the operating space.     

Green light radiation effects on free radicals inhibition in cellular and chemical systems

Free radicals generation is inhibited through green light (GL) irradiation in cellular systems and in chemical reactions. Standard melanocyte cultures were UV-irradiated and the induced cellular reactive oxygen species (ROS) were quantified by the fluorescence technique. The same cell cultures, previously protected by a 24h GL exposure, displayed a significantly lower ROS production. A simple chemical reaction is subsequently chosen, in which the production of free radicals is well defined. Paraffin wax and mineral oil were GL irradiated during thermal degradation and the oxidation products checked by chemiluminescence [CL] and Fourier transform infrared spectra [FT-IR]. The same clear inhibition of the radical oxidation of alkanes is recorded. A quantum chemistry modeling of these results is performed and a mechanism involving a new type of Rydberg macromolecular systems with implications for biology and medicine is suggested.     

QTAIM analysis of the HF, HCl, HBr, and HOH elimination reactions of halohydrocarbons and halohydroalcohols

The 1,2-HX elimination reaction (where X = F, Cl, Br, OH) has been established as an important reaction in the degradation of compounds introduced into the upper atmosphere, including common CFC replacement compounds. By analyzing the electron densities of the transition state geometries of these reactions using QTAIM, we see that we can divide these reactions into two types. For HF and HOH elimination, the transition state is a complete ring of bonds, and neither the C-H nor the C-X bonds have been broken at the maximum of energy. There is very little accumulation of electron density on the X atom, with the majority of charge being lost by the hydrogen atom undergoing elimination, being transferred on to the two carbon atoms. In HCl and HBr elimination, a similar loss of electron density of the hydrogen atom is accompanied by significant accumulation of electron density on the X atom and a smaller change in electron density on the carbon atoms. The C-X bond is broken in the transition state geometry, with no ring critical point being present. This may explain the relative stabilities of halohydrocarbons and haloalcohols with respect to loss of H-X.