Plasticization of ultra-thin polysulfone membranes by carbon dioxide

Plasticization of gas separation membranes by carbon dioxide permanently alters their performance and increases the possibility of membrane failure. This is amplified in ultra-thin composite membranes, where the active polymeric layer is less than 2 μm. Here, the plasticization influence of CO₂ is measured on ultra-thin polysulfone composite membranes for a range of active layer thicknesses, at four temperatures. The resulting permeability–pressure isotherms demonstrate plasticization occurs for all thicknesses at pressures lower than has been reported for dense membranes. These isotherms were quantitatively fitted with an expanded dual-sorption model that takes into account plasticization of the membrane. The plasticization potential of CO₂ for polysulfone was found to increase with reduced active layer thickness. Similarly, the plasticization potential of CO₂ was found to decrease with temperature. These results are consistent with similar research that shows that thin films behave differently to dense membranes.     

Effect of surfactants on the kinetics of nickel(II) extraction by 2-hydroxy-5-nonylacetophenone oxime (LIX 84) in an n-heptane/water system

The initial reaction rates of the extraction of nickel(II) by 2-hydroxy-5-nonylacetophenone oxime (HNAPO) in a two-phase oil/water system was measured using a total internal reflectance static transfer cell. A two-step reaction mechanism between nickel(II) and HNAPO was found to satisfactorily explain the observed initial reaction rate (R(int)). The addition of neutral surfactants, nonionic octaethylene glycol mono-n-dodecyl ether and zwitterionic n-dodecyldimethyl-3-ammonio-1-propanesulfonate, decreased R(int), which could be accounted for with a competitive surface adsorption model. The presence of the anionic surfactant sodium dodecyl sulfate accelerated and then decelerated R(int), while the cationic surfactant dodecyltrimethylammonium chloride caused a decrease. The effects of these charged surfactants were accounted for using a combination of a competitive surface adsorption model and the Boltzmann distribution of charged species.     

Simulation of particle transport and deposition in the modified chemical vapor deposition process

The many complex interactions between system variables means that the experimental understanding of the mechanisms of soot generation, transport and deposition in the modified chemical vapor deposition process used to fabricate silica-based optical fibers is limited. This paper presents a computational fluid dynamics study of the process, in which the particle formation zone and flow field are calculated and silica particles are ‘launched’ at the reaction front and tracked until they either deposit on the substrate tube or exit the system. Variables which can affect this process are tube rotation rate, wall temperature profile, inlet feed composition and gas flow rate. It is shown that buoyancy alone and a combination of buoyancy and tube rotation are ‘symmetry breakers’ in terms of particle generation-deposition and that the most important factors affecting deposition are the gas flow rate and the shape of the wall temperature profile. This sensitivity arises from the competing forces of fluid drag and thermophoresis acting on the particles. It is suggested that altering the wall temperature profile by use of different size burners or changing the substrate tube cooling conditions could achieve significantly different soot deposition layer quality, which would be reflected in the final optical fiber performance.     

In-beam studies of very neutron-deficient heavy nuclei

The JYFL gas-filled recoil separator RITU, combined with Ge detector arrays and a SACRED magnetic solenoid spectrometer, has been successfully employed in recoil-decay-tagging (RDT) experiments in order to probe structures of very neutron-deficient heavy nuclei. The present contribution focuses on the light Pb region where the new data extend the systematics of shape-coexisting yrast states towards the proton dripline. Similarities between band structures and their relation to possible multi-particle multi-hole intruder excitations will be discussed. Received: 21 March 2002 / Accepted: 16 May 2002 / Published online: 31 October 2002 RID="a" ID="a"e-mail: rauno.julin@phys.jyu.fi     

Contrasting Volatilomes of Livestock Dung Drive Preference of the Dung Beetle Bubas bison (Coleoptera: Scarabaeidae)

Volatile cues can play a significant role in the location and discrimination of food resources by insects. Dung beetles have been reported to discriminate among dung types produced by different species, thereby exhibiting behavioral preferences. However, the role of volatile organic compounds (VOCs) in dung localization and preference remains largely unexplored in dung beetles. Here we performed several studies: firstly, cage olfactometer bioassays were performed to evaluate the behavioral responses of Bubas bison (Coleoptera: Scarabaeidae) to VOCs emanating from fresh horse, sheep, and cattle dung; secondly, concurrent volatilome analysis was performed to characterize volatilomes of these dung types. Bubas bison adults exhibited greater attraction to horse dung and less attraction to cattle dung, and they preferred dung from horses fed a pasture-based diet over dung from those fed lucerne hay. Volatilomes of the corresponding dung samples from each livestock species contained a diverse group of alkanes, alkenes, alkynes, alcohols, aldehydes, ketones, esters, phenols, and sulfurous compounds, but the composition and abundance of annotated VOCs varied with dung type and livestock diet. The volatilome of horse dung was the most chemically diverse. Results from a third study evaluating electroantennogram response and supplementary olfactometry provided strong evidence that indole, butyric acid, butanone, p-cresol, skatole, and phenol, as well as toluene, are involved in the attraction of B. bison to dung, with a mixture of these components significantly more attractive than individual constituents.     

Method validation and determination of enantiomers and conformers in tofisopam drug substances and drug products by chiral high-performance liquid chromatography and kinetic and thermodynamic study of the interconversion of the conformers

1-(3,4-Dimethoxyphenyl)-4-methyl-5-ethyl-7,8-dimethoxy-5H-2,3-benzodiazepine (tofisopam) contains one chiral center, so two enantiomeric forms exist. The ring system of tofisopam possesses two sterically stable boat structures, leading to two distinct conformers for each enantiomer. A method was developed for the separation of these enantiomers and conformers in the drug substances and drug products. Separation was achieved with a separation factor of at least 3.9 for any adjacent peaks. Validation of the method challenged linearity, limit of detection, limit of quantification, specificity, accuracy, repeatability, intermediate precision, robustness, and stability of standard and sample solutions, and all validation results met the acceptance criteria. A study of accuracy at 80%, 100%, and 120% levels gave recoveries of 100 +/- 1%. The RSD of six sample injections for repeatability was less than 0.5%. The detection limit of tofisopam enantiomer was as low as 0.12 microg/mL. The kinetics and thermodynamics of the interconversion of tofisopam conformers were also investigated, and the kinetic and equilibrium constants of the interconversion process were determined at 15 degrees C, 25 degrees C, and 35 degrees C.     

Mixed spherical and wormlike micelles: a contrast-matching study by small-angle neutron scattering

Small-angle neutron scattering studies were used to investigate the effect of adding an alcohol ethoxylate nonionic surfactant (d-C12E20) to aqueous solutions of a cationic surfactant, erucyl bis(hydroxyethyl) methylammonium chloride (EHAC), with and without salt (KCl). The systematic use of contrast-matching, by alternately highlighting or hiding one of the surfactants, confirms that mixed micelles are formed. In salt-free solutions, mixed spherical micelles are formed and a core-shell model combined with a Hayter-Penfold potential was used to describe the data. The core radius is dominated by the EHAC tails and the outer radius determined by the ethoxylate headgroups of the nonionic surfactant. Addition of KCl promotes micellar growth; however, results of varying the solvent contrast revealed that when the nonionic surfactant is incorporated into the wormlike structure micellar breaking is promoted. Thus, mixed wormlike micelles with shorter contour lengths compared to the pure EHAC worms are formed.     

Stereoselective Synthesis of the Decahydrofluorene Core of the Hirsutellones

A stereoselective synthesis of the decahydrofluorene core of the hirsutellones was accomplished in eight steps and in 43% overall yield. The key step of the synthesis is the highly stereoselective intramolecular Diels-Alder cyclization of the siloxacyclopentene-constrained tetraene 1.     

Memory for the locations of environmental sounds

The accuracy with which a single source of sound can be localized has been examined in many studies, but very few studies have examined the ability of participants to determine the absolute locations of multiple sources of sound. The current study assessed participants' abilities to determine and remember the locations of up to six sources of environmental sound that were positioned at a range of azimuths and elevations in virtual auditory space. In experiment 1, a sequence of one to six sounds was presented one, three, or five times in each trial and the target sound was nominated following presentation of the last sequence. In experiment 2, memory load was held constant by nominating the target sound prior to a single sequence presentation. Localization accuracy was observed to decrease as the number of sounds was increased to three or more under the conditions of experiment 1, but not those of experiment 2. In experiment 1, localization was more accurate when sequences were presented more than once. Pronounced primacy and recency effects were observed for the six sound conditions in experiment 1. An analysis of errors for those conditions indicated that immediate temporal errors, but not immediate spatial errors, were over-represented.