An extended-length coil design for peripheral MR angiography.

Magnetic resonance angiography of the peripheral vascular system has been hampered by the limited view provided by available imaging coils. We have constructed an extended-length, split-saddle design radiofrequency (rf) coil for peripheral angiography. The two coil halves are inductively coupled, to each other and to the rf source. Details regarding the construction of the coil and comparison of the performance with the knee coil are described here. This coil provides the benefit of a larger field of view but with image quality comparable to that of a commercial knee coil.     

The photoelectron spectra of gaseous alkali perrhenates

The HeI photoelectron spectra of the gaseous alkali perrhenates have been obtained using a high-temperature cylindrical mirror electron spectrometer equipped with an internally located, resistance-heated sample oven. The ionization energies have been assigned molecular-orbital origins using MO calculations and comparisons with X-ray photoelectron data, UV-visible electronic spectra, and electron diffraction experiments.     

High angle phase modulated low coherence interferometry for path length resolved Doppler measurements of multiply scattered light

We describe an improved method for coherence domain path length resolved measurements of multiply scattered photons in turbid media. An electro-optic phase modulator sinusoidally modulates the phase in the reference arm of a low coherence fiber optic Mach-Zehnder interferometer, at a high phase modulation angle. For dynamic turbid media this results in Doppler broadened phase modulation interference peaks at the modulation frequency and its multiples. The signal to noise ratio is increased by almost one order or magnitude for large modulation angles and the shape of the spectral peaks resulting from the interference of Doppler shifted sample waves and reference light is not changed. The path length dependent Doppler broadening is compared with the theoretical predictions in the single scattered and diffusive regimes. The experimentally measured optical path lengths are validated with the Monte Carlo technique.     

Sensitivity of in-Plane Strain Measurement to Calibration Parameter for out-of-Plane Specimen Rotations

In practice, out-of-plane motions usually are not avoidable during experiments. Since 2D–DIC measurements are vulnerable to parasitic deformations due to out-of-plane specimen motions, three-dimensional digital image correlation (StereoDIC or 3D–DIC) oftentimes is employed. The StereoDIC method is known to be capable of accurate deformation measurements for specimens subjected to general three-dimensional motions, including out-of-plane rotations and displacements. As a result, there has been limited study of the deformation measurements obtained when using StereoDIC to measure the displacement and strain fields for a specimen subjected only to out-of-plane rotation. To assess the accuracy of strain measurements obtained using stereovision systems and StereoDIC when a specimen undergoes appreciable out of plane rotation, rigid body out-of-plane rotation experiments are performed in the range ?40⁰?≤?θ?≤?40⁰ using a two-camera stereovision system. Results indicate that (a) for what would normally be considered “small angle” calibration processes, the measured normal strain in the foreshortened specimen direction due to specimen rotation increases in a non-linear manner with rotation angle, with measurement errors exceeding ±1400με and (b) for what would normally be considered “large angle” calibration processes, the magnitude of the errors in the strain are reduced to ±300με. To theoretically assess the effect of calibration parameters on the measurements, two separate analyses are performed. First, theoretical strains due to out-of-plane rigid body rotation are determined using a pinhole camera model to project a series of three-dimensional object points into the image plane using large angle calibration parameters and then re-project the corresponding sensor plane coordinates back into the plane using small angle calibration parameters. Secondly, the entire imaging process is also simulated in order to remove experimental error sources and to further validate the theory. Results from both approaches confirmed the same strain error trends as the experimental strain measurements, providing confidence that the source of the errors is the calibration process. Finally, variance based sensitivity analyses show that inaccuracy in the calibrated stereo angle parameter is the most significant factor affecting the accuracy of the measured strain.     

Crystal structure of tylophorine methiodide monohydrate,C25H30NO 4 + I−·H2O

The crystal structure of tylophorine (Chemical name 2,3,6,7 tetramethoxy phenanthro [9,10:6, 7] indolizidine. Contribution No. 0871.) methiodide monohydrate has been determined. C₂₅H₃₀NO ₄ ⁺ I^–·H₂0, triclinic, P,a=8.831(1)Å, b=10.842(2),c=13.902(2), =105.0(1)^o, =104.7(1), =97.3(1),V=1210.22ų, Z=2,D _x =1.428 g./cm^–3, (CuK)=1.54184Å, (CUK)=107.2 cm^–1, F(000)=544,T=295^oK,R=0.038,Rw=0.046, for 2331 observed reflections withI2(I). Apart from van der Waals forces, the structure is stabilized by two hydrogen bonds of the type Ow(H) ... O and Ow(H) ... I^– involving the water molecule as the donor and atom O4 of the methoxy group and I^– as acceptors.     

Poly(phenylene sulfide): Synthesis from 1,4-dibromobenzene and sodium sulfide

A new route to synthesize poly(p-phenylene sulfide) by nucleophilic substitution of 1,4-dibromobenzene with sodium sulfide in N-methylpyrrolidone is described. Kinetic evaluation shows the reaction to be of second order with two distinctive rate constant regimes. The first rate constant is higher and is operative until 50% conversion, whereas in the second regime (between 50 and 92% conversion) the rate is slower. The kinetics of this route is compared under identical conditions with the conventional synthesis based on 1,4-dichloro benzene and sodium sulfide.     

Speckles in laser Doppler perfusion imaging

We report on the quantitative influence of speckles in laser Doppler perfusion imaging. The influence of speckles on the signal amplitude and on the Doppler spectrum is demonstrated experimentally for particle suspensions with different scattering levels and various beam widths. It is shown that the type of tissue affects the instrumental response through the effect of lateral light diffusion on the number of speckles involved in the detection process. These effects are largest for narrow beams.     

A Study of Two-Dimensional Plane Elasticity Finite Elements for Optimal Design

ABSTRACT

Design of structures using a variety of two-dimensional finite elements is considered in this paper. An efficient technique of computing first-order derivatives of pointwise stress constraints for simple and higher-order two-dimensional (membrane) finite elements is presented. Computational aspects of design sensitivity vector calculation, using a semi-analytical method versus traditional methods are presented. Implementation of a fully-stressed design approach to find a suitable initial estimate leads to increased computational efficiency. These aspects of the design procedure are illustrated through analysis of numerical examples. Experience indicates that a suitable mix of low and higher-order elements yields the most efficient and accurate design model.