Hyperpolarized 13C Magnetic Resonance Imaging of Fumarate Metabolism by Parahydrogen-induced Polarization: A Proof-of-Concept in vivo Study

Hyperpolarized [1-¹³C]fumarate is a promising magnetic resonance imaging (MRI) biomarker for cellular necrosis, which plays an important role in various disease and cancerous pathological processes. To demonstrate the feasibility of MRI of [1-¹³C]fumarate metabolism using parahydrogen-induced polarization (PHIP), a low-cost alternative to dissolution dynamic nuclear polarization (dDNP), a cost-effective and high-yield synthetic pathway of hydrogenation precursor [1-¹³C]acetylenedicarboxylate (ADC) was developed. The trans-selectivity of the hydrogenation reaction of ADC using a ruthenium-based catalyst was elucidated employing density functional theory (DFT) simulations. A simple PHIP set-up was used to generate hyperpolarized [1-¹³C]fumarate at sufficient ¹³C polarization for ex vivo detection of hyperpolarized ¹³C malate metabolized from fumarate in murine liver tissue homogenates, and in vivo ¹³C MR spectroscopy and imaging in a murine model of acetaminophen-induced hepatitis.     

Isotopic dependence of the giant monopole resonance in the even-A 112-124Sn isotopes and the asymmetry term in nuclear incompressibility

The strength distributions of the giant monopole resonance (GMR) have been measured in the even-A Sn isotopes (A=112-124) with inelastic scattering of 400-MeV alpha particles in the angular range 0 degrees -8.5 degrees . We find that the experimentally observed GMR energies of the Sn isotopes are lower than the values predicted by theoretical calculations that reproduce the GMR energies in 208Pb and 90Zr very well. From the GMR data, a value of Ktau = -550 +/- 100 MeV is obtained for the asymmetry term in the nuclear incompressibility.     

Second-harmonic-generation microscope using eight-segment polarization-mode converter to observe three-dimensional molecular orientation

We developed a compact polarization-mode converter for microscopy to control three-dimensional polarization at the focus. The converter consisted of two homogeneously aligned liquid-crystal spatial light modulators with eight independently controllable electrodes (segments), and a quarter-waveplate. The converter converted a linearly polarized beam to three polarization modes: two orthogonal linear polarizations and a pseudo-radial polarization. We applied the converter to second-harmonic-generation microscopy and demonstrated the detection of three-dimensional molecular orientation.     

Electron beam treatment of lignite-burning flue gas with high concentrations of sulfur dioxide and water

Experiments were carried out to investigate the removals of SO₂ and NO_x from simulated lignite-burning flue gas containing SO₂ (4800 ppm), NO (320 ppm) and H₂O (22%) by electron beam irradiation. Removal efficiencies of SO₂ and NO_x were achieved to reach 97 and 88% at 70°C, and 74 and 85% at 80°C, respectively, with the dose of 10.3 kGy without NH₃ leakage. The higher removal efficiencies of SO₂ and NO_x were observed in simulated lignite-burning flue gas than in coal-fired flue gas containing 800 ppm of SO₂, 225 ppm of NO and 7.5% H₂O at the same treatment condition. The higher removal efficiencies were attributed to the higher concentrations of SO₂, H₂O, and added NH₃. Simulation calculations indicated that the higher concentrations of these components enhance the effective radical reactions to oxidize NO to form NO₂ with HO₂ radical, and to oxidize SO₂ to form SO₃ with OH radical and O₂. The reactions of NO_x with N and NH₂ radicals to produce N₂ and N₂O also promote the NO_x removal. By-product was determined to be the mixture of (NH₄)₂SO₄ and NH₄NO₃ containing a small amount of H₂SO₄.     

Formulation for XPS spectral change of oxides by ion bombardment as a function of sputtering time

XPS measurement revealed that the original state of TiO₂ was changed to Ti₂O₃ and TiO by ion bombardment. TiO₂ decreased and Ti₂O₃ increased at the initial stage. TiO increased at a later stage than Ti₂O₃. Each of them saturated after enough sputtering time.A formulation was proposed in order to explain the change of XPS spectra for oxides as a function of ion sputtering time. This formulation was based on reaction equations that contain two reduction processes (from TiO₂ to Ti₂O₃ and from Ti₂O₃ to TiO), and sputtering effects. Using four fitting parameters (two reduction coefficients, sputtering yield and information depth), the present formula was fitted to the experimental results. The fitting results agree satisfactorily with the experimental results. The calculation shows that the reduction coefficient from TiO₂ to Ti₂O₃ is about ten times larger than that from Ti₂O₃ to TiO. This calculation predicts that surface composition of an oxide that is changed by ion bombardment will reach a different value depending on its bulk composition. Moreover, the present formulation can determine the chemical states of compounds changed by ion bombardment.     

Neutral Larkin-Ovchinnikov-Fulde-Ferrell state and chromomagnetic instability in two-flavor dense QCD

In two-flavor dense quark matter, we describe the dynamics in the single plane wave Larkin-Ovchinnikov-Fulde-Ferrell (LOFF) state satisfying the color and electric neutrality conditions. We find that because the neutral LOFF state itself suffers from a chromomagnetic instability in the whole region where it coexists with the (gapped or gapless) two-flavor superconducting phases, it cannot cure this instability in those phases. This is unlike the recently revealed gluonic phase which seems to be able to resolve this problem.     

Fabrication of flower-shaped Bi2O3 superstructure by a facile template-free process

A novel flower-shaped Bi₂O₃ superstructure has been successfully synthesized by calcination of the precursor, which was prepared via a citric acid assisted hydrothermal process. The precursor and Bi₂O₃ were characterized with respect to morphology, crystal structure and elemental chemical state by field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). It was shown that both the precursor and Bi₂O₃ flower-shaped superstructure were constructed of numerous nanosheets while the nanosheets consisted of a great deal of nanoparticles. Furthermore, key factors for the formation of the superstructures have been proposed; a mechanism for the growth of the superstructure has been presented based on the FESEM investigation of different growth stages.     

Fatigue Crack Nucleation at Σ3(1 1 2) Boundary in a Ferritic Stainless Steel

The effect of a geometrical relationship between a grain boundary (GB) plane and a tensile axis on intergranular fatigue cracking along 3(1 1 2) twin boundaries has been investigated in Fe-30%Cr alloy crystals. Fatigue experiments were carried out on the three kinds of the specimens containing the 3(1 1 2) twin boundary. It was found that the fatigue cracking behavior was sensitive to the geometry of the GB plane. In a specimen where both the GB plane and a slip vector lying in the GB plane in adjacent grains are inclined to the tensile axis at 45°, the fatigue cracks were nucleated preferentially along the twin boundary at a stress amplitude of 170 MPa. The specimen with the GB plane normal to the tensile axis showed that the fatigue crack was initiated from a slip band formed within a constituent grain at a stress amplitude of 300 MPa. When the GB plane was inclined to the tensile axis but the slip vector lying in the GB plane was normal to the tensile axis, development of additional slips formed perpendicular to the GB plane were observed at a specific site of the GB. Initiation of intergranular fatigue cracks at the site was recognized at a stress amplitude of 250 MPa. It can be suggested that the GB plane normal to the tensile axis provides the highest fatigue performance among them. The difference in the cracking property among these specimens could be understood in terms of the effective Schmid factor derived from elastically incompatible stress.     

The effect of oxygen vacancy on the oxide ion mobility in LaAlO3-based oxides

The electrical property of (La_1−xSr_x)_1−z(Al_1−yMg_y)O_3−δ (LSAM; x≤0.3, y≤0.15 and z≤0.1) was measured using the DC four-probe method as a function of temperature (500–1000°C) and oxygen partial pressure (1–10⁻²² atm). Among LSAMs, (La_0.9Sr_0.1)AlO_3−δ showed the highest ionic conductivity, σ_i=1.3×10⁻² S cm⁻¹ at 900°C. A simultaneous substitution at A and B sites or A site deficiency is expected to create larger oxygen vacancy and higher ionic conductivity. However, it showed a negative effect. The effect of the vacancy increase did not effect monotonously the ionic conductivity. It was found that the concentration of oxygen vacancy, [V_O], influences not only the oxide ion conductivity, σ_i, but also the mobility, μ_v, of [V_O]. These properties exhibit a maximum at around [V_O]=0.05. With the increase in [V_O], the activation energy, E_a, of the ionic conduction dropped from 1.8 to ca. 1.0 eV at [V_O]=0.05 and became almost constant at [V_O]>0.05. The dependency of the pre-exponential term, μ⁰_v, and E_a on [V_O] was analyzed and their effect on μ_v and σ_i was discussed with respect to crystal structure and defect association. It was estimated that the crystal structure mainly governs these properties. The effect of defect association could not be ignored but is considered to be a complicated correlation.