22Na(p,γ)23Mg反应的实验研究

讨论了目前有关²²Na(p,γ)²³Mg反应的实验研究工作,结合兰州放射性束流线上的放射性束流²³Al的β⁺延发质子衰变实验的测量结果,给出了²³Al延发衰变的质子能谱,并比较了近期实验给出的相关能级的自旋、宇称值,正是由于这种自旋、宇称和能级部分宽度的不确定性,导致了反应率计算的不确定性.计算了同位旋相似态的共振强度.对于测量到的新的延发衰变能级E_d=8.916MeV,由于没有相应的能级宽度值,实验仅给出其相对共振强度值.     

The limiting absorption principle for the two-dimensional inhomogeneous anisotropic elasticity system

In this work we establish the limiting absorption principle for the two-dimensional steady-state elasticity system in an inhomogeneous aniso- tropic medium. We then use the limiting absorption principle to prove the existence of a radiation solution to the exterior Dirichlet or Neumann boundary value problems for such a system. In order to define the radiation solution, we need to impose certain appropriate radiation conditions at infinity. It should be remarked that even though in this paper we assume that the medium is homogeneous outside of a large domain, it still preserves anisotropy. Thus the classical Kupradze's radiation conditions for the isotropic system are not suitable in our problem and new radiation conditions are required. The uniqueness of the radiation solution plays a key role in establishing the limiting absorption principle. To prove the uniqueness of the radiation solution, we make use of the unique continuation property, which was recently obtained by the authors. The study of this work is motivated by related inverse problems in the anisotropic elasticity system. The existence and uniqueness of the radiation solution are fundamental questions in the investigation of inverse problems.

     

动态固相微萃取-气相色谱法测定环境空气中挥发性脂肪酸的研究

建立了动态固相微萃取-气相色谱(FID)测定环境空气中挥发性脂肪酸(VFAs)的分析方法,选择乙酸(AA)、丙酸(PA)、丁酸(BA)、异丁酸(iso-BA)、戊酸(VA)和异戊酸(iso-VA)6种代表性VFAs为研究对象,研制了动态萃取装置并建立了动态萃取机制。研究了固相微萃取材料、萃取时间、萃取温度、萃取流速、解析温度及时间对VFAs萃取效率的影响,在此基础上优化了气相色谱法检测条件。在优化条件下,6种脂肪酸的线性范围均达到4个数量级,相关系数均大于0.990。方法的检出限(S/N=3)为1.0~4.7μg/L,相对标准偏差(RSD,n=3)为1.1%~6.8%。与常规方法相比,该方法大大提高了检测范围和检测灵敏度,并成功用于环境空气中挥发性脂肪酸的分析检测。     

化学拆分的新方法研究

主要介绍了近年来发展起来的两种化学拆分新方法,包括拆分和组合拆分;并简要论述了化学拆分中的手性识别现象,以及化学拆分方法在手性药物制备中的应用。     

Synthesis of novel N‐alkyl/aryl‐N′‐(4‐arylthiazol‐2‐yl)‐N″‐xylosyl guanidines

The reaction of 2,3,4‐tri‐O‐acetyl‐β‐D‐xylopyranosyl isothiocyanate ( 1 ) and 2‐amino‐4‐arylthiazoles ( 2 ) gave xylosylthioureas 3 . These thiourea derivatives reacted with alkyl/aryl amine in the presence of HgCl₂ to give a new series of N‐alkyl/aryl‐N″‐(4‐arylthiazol‐2‐yl)‐N″‐xylosyl guanidines 4 . Some of the synthesized guanidines were screened for their biological activity. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:688–694, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20379     

9,9′‐spirobifluorene‐containing polycarbonates: Transparent polymers with high refractive index and low birefringence

Syntheses of 2,2′‐bisalcoholic group‐substituted 9,9′‐spirobifluorene monomers 2 were performed by the reaction of 2,2′‐dihydroxy‐9,9′‐spirobifluorene 2a with haloalcohols. Polycarbonates consisting of 9,9′‐spirobifluorene skeleton in the main chain (PC 4 ) were synthesized by the polycondensation of 2,2′‐bisalcoholic monomers 2 and triphosgene or diphenyl carbonate. PC 4 showed good thermal stability: the 5% weight loss temperature was over 330 °C under both nitrogen and air atmospheres. The glass transition temperature was in a range of 16–269 °C estimated by differential scanning calorimetry, depending on the flexibility of the alkylene or oxyethylene chains of 2 . PC 4 showed high solubility toward ordinary organic solvents such as CHCl₃, benzene, and THF, making possible the preparation of the flexible thin films. Very high refractive index in a range of 1.62–1.66 at 589 nm was observed although PC 4 consists only of C, H, and O atoms, whereas very low degree of birefringence was confirmed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3658–3667, 2010     

Piezo electric sensor for endocrine-disrupting chemicals using receptor-co-factor interaction.

In vitro screening assays are useful techniques for the determination of receptor-mediated activities in environmental samples. In order to define whether environmental chemicals act as an agonist or antagonist to the human estrogen receptor (hER), we have constructed a biosensor based on ligand-inducible interactions between hER and relative proteins on a quartz crystal microbalance (QCM). The his-tagged proteins, which were expressed in E. coli by recombinant DNA technology, were immobilized on an Au-electrode with Ni(II)-mediated chemisorption using the histidine tag and thiol-modified iminodiacetic acid. The resonance-frequency change of the protein-modified electrode was caused by association or dissociation with the hER relative proteins on the surface in the presence of estrogen. These results suggest that this sensor is applicable as a large-scale screening tool for estrogenic compounds.     

Existence and global bounds for a fluid model of plasma display technology

This article considers the fluid model for the discharge of plasma particle species in display technology. The fluid equations are coupled with Poisson's equation, which describes the effect of the charged particles on the electric field. The diffusion and mobility coefficients for the positive ion particles depend on the electric field, while those for the electrons depend on the electron mean energy. The reaction rates are proportional to the products of the densities of the reacting particles involved in the particular ionization, conversion or recombination reactions. Moreover, the ionization coefficients are dependent on the electric field, which varies spatially and temporally. The main ionization and discharge reactions are described by an initial-boundary value problem for a system of coupled parabolic–elliptic partial differential equations. The system is first analyzed by upper–lower solution method. By means of the a priori bounds obtained for an arbitrary time, the existence of solution for the initial-boundary value problem is proved in an appropriate Hölder space.     

Green synthesis of gold nanoparticles using glycerol-incorporated nanosized liposomes

There has been enormous interest in the last decade in development methods for the inorganic synthesis of metallic nanoparticles of desired sizes and shapes because of their unique properties and extensive applications in catalysis, electronics, plasmonics, and sensing. Here we report on an environmentally friendly, one-pot synthesis of metallic nanoparticles, which avoids the use of organic solvents and requires mild experimental conditions. The developed method uses liposomes as nanoreactors, where the liposomes were prepared by encapsulating chloroauric acid and exploited the use of glycerol, incorporated within the lipid bilayer as well as in its hydrophilic core, as a reducing agent for the controlled preparation of highly homogeneous populations of gold nanoparticles. The effects of temperature, the presence of a capping agent, and the concentration of glycerol on the size and homogeneity of the nanoparticles formed were investigated and compared with solution-based glycerol-mediated nanoparticle synthesis. Well-distributed gold nanoparticle populations in the range of 2-8 nm were prepared in the designed liposomal nanoreactor with a clear dependence of the size on the concentration of glycerol, the temperature, and the presence of a capping agent whereas large, heterogeneous populations of nanoparticles with amorphous shapes were obtained in the absence of liposomes. The particle morphology and sizes were analyzed using transmission electron microscopy imaging, and the liposome size was measured using photon correlation spectroscopy.     

A novel ion‐imprinted hydrogel for recognition of potassium ions with rapid response

A novel ion‐imprinted strategy is developed for synthesizing responsive hydrogels with rapid response to potassium ions. With potassium ions as templates, ion‐imprinted poly(N‐isopropylacrylamide‐co‐benzo‐15‐crown‐5‐acrylamide) (P(NIPAM‐co‐B15C5Am)) hydrogels are synthesized with 15‐crown‐5 crown ethers mounted on the polymer networks in pairs; therefore, it is very easy and fast for the crown ethers to capture potassium ions again by their Venus flytrap action and form stable 2:1 “host–guest” complexes with potassium ions in the ion‐recognition process. As a result, the response rate of the ion‐imprinted hydrogels to potassium ions is significantly faster than that of normal P(NIPAM‐co‐B15C5Am) hydrogels in which 15‐crown‐5 crown ethers are randomly pendent on the polymeric networks. Copyright © 2010 John Wiley & Sons, Ltd.