Effect of ethyl cellulose microencapsulated ammonium polyphosphate on flame retardancy,mechanical and thermal properties of flame retardant poly(butylene succinate) composites

Ethyl cellulose, a widely used bio-degradable shell material, microencapsulated ammonium polyphosphate (MAPP) was added to the bio-degradable poly(butylene succinate) (PBS) to improve its flame retardancy, compatibility, and thermal stability. The MAPP was well characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy (SEM), water contact angle, and thermogravimetric (TG) analysis. The SEM results indicate the improved dispersion of MAPP into PBS matrix and the formation of the strong interfacial adhesion between MAPP and PBS than APP. With the incorporation of MAPP and char-forming agent into PBS, the limiting oxygen index of the composite was increased to 35.5 %, and the sample can pass the UL-94 V-0 rating, while the un-microencapsulated counterpart cannot reach the rating. The cone calorimeter test showed that the peak heat release rate was decreased by 46.7 % and the burning time was also prolonged compared to the pure PBS. The increased melt flow index and rheology test indicated the increase of viscosity and the improvement of anti-dripping properties. Moreover, the mechanical properties and thermal stability of MAPP composite were also obviously enhanced after the microencapsulation by mechanical, dynamical mechanical thermal analysis, and TG analysis.     

表面修饰多壁碳纳米管负载二氧化钛的制备及催化碳酸二甲酯与苯酚酯交换反应的性能

制备了表面修饰多壁碳纳米管负载TiO₂的催化剂,并将其应用于碳酸二甲酯与苯酚的酯交换反应. 采用X射线电子能谱、透射电子显微镜、低温N₂吸附-脱附和X射线衍射等对催化剂进行了表征. 结果表明,以低浓度的氨水（0.4%）代替去离子水作为沉淀剂时,制备的催化剂显示出更好的催化活性、分离性与重复使用性. 考察了TiO₂负载量、催化剂用量及反应时间对反应性能的影响. 在最佳反应条件下,苯酚转化率为42.5%,碳酸甲苯酯与碳酸二苯酯的总选择性达到99.9%以上. 经过4次重复使用后,催化剂的活性略有下降.     

Hydrothermal synthesis of peony-like CuO micro/nanostructures for high-performance lithium-ion battery anodes

The peony-like CuO micro/nanostructures were fabricated by a facile hydrothermal approach. The peonylike CuO micro/nanostructures about 3-5 μm in diameter were assembled by CuO nanoplates. These CuO nanoplates, as the building block, were self-assembled into multilayer structures under the action of ethidene diamine, and then grew into uniform peony-like CuO architecture. The novel peony-like CuO micro/nanostructures exhibit a high cycling stability and improved rate capability. The peony-like CuO micro/nanostructures electrodes show a high reversible capacity of 456 mAh/g after 200 cycles, much higher than that of the commercial CuO nanocrystals at a current 0.1 C. The excellent electrochemical performance of peony-like CuO micro/nanostructures might be ascribed to the unique assembly structure, which not only provide large electrode/electrolyte contact area to accelerate the lithiation reaction, but also the interval between the multilayer structures of CuO nanoplates electrode could provide enough interior space to accommodate the volume change during Li~+ insertion and de-insertion process.     

Effect of organic acid chain length on foam performance in a porous medium

We have systematically studied the effect of organic acid chain length on surface dilatational properties and foam flow performance in a porous medium. Surface dilatational properties were studied by oscillating drop module (ODM). ODM results in deionized water show that sufficient long chain length of organic acid is an essential requirement for high surface dilatational modulus. While, to various salinities, surfactant to acid ratio of achieving high surface dilatational modulus varies. Foam flow tests show that surface dilatational modulus has decisive effect on produced foam size, which partially determines foam flow pressure drop. Both surface dilatational modulus and surface tension determine foam flow pressure drop. Besides, surface loss modulus also contributes to pressure drop. Bulk foam tests show that addition of organic acids with proper chain length can enhance foam tolerance to oil significantly. Compared with alkane chain length, acid with longer chain has good ability in stabilizing foam. At last, foam flooding tests show that surface dilatational modulus and foam tolerance to oil play important roles in foam enhanced oil recovery.     

New borrelidin derivatives from an endophytic Streptomyces sp.

Three new borrelidin-type macrolactones, designated as borrelidins J?L (4–6), together with borrelidin A (1), borrelidin E (2), and 12-desnitrile-12-carboxyl-borrelidin (3) were isolated from a plant endophytic Streptomyces sp. NA06554. Their structures were determined by extensive spectroscopic analysis including HRESIMS, 1D and 2D NMR data. The antibacterial activities for compounds 1–6 were examined. Borrelidins A (1) and L (6) showed potent and moderate antibacterial activity against Micrococcus luteus, respectively, whereas other derivatives (2–5) are almost inactive, which allows us to propose a plausible structure-activity relationship.     

Imaging of Colorectal Cancers Using Activatable Nanoprobes with Second Near‐Infrared Window Emission

Fluorescent probes in the second near‐infrared window (NIR‐II) allow high‐resolution bioimaging with deep‐tissue penetration. However, existing NIR‐II materials often have poor signal‐to‐background ratios because of the lack of target specificity. Herein, an activatable NIR‐II nanoprobe for visualizing colorectal cancers was devised. This designed probe displays H₂S‐activated ratiometric fluorescence and light‐up NIR‐II emission at 900–1300 nm. By using this activatable and target specific probe for deep‐tissue imaging of H₂S‐rich colon cancer cells, accurate identification of colorectal tumors in animal models were performed. It is anticipated that the development of activatable NIR‐II probes will find widespread applications in biological and clinical systems.     

Valency‐Controlled Framework Nucleic Acid Signal Amplifiers

Weak ligand–receptor recognition events are often amplified by recruiting multiple regulatory biomolecules to the action site in biological systems. However, signal amplification in in vitro biomimetic systems generally lack the spatiotemporal regulation in vivo. Herein we report a framework nucleic acid (FNA)‐programmed strategy to develop valence‐controlled signal amplifiers with high modularity for ultrasensitive biosensing. We demonstrated that the FNA‐programmed signal amplifiers could recruit nucleic acids, proteins, and inorganic nanoparticles in a stoichiometric manner. The valence‐controlled signal amplifier enhanced the quantification ability of electrochemical biosensors, and enabled ultrasensitive detection of tumor‐relevant circulating free DNA (cfDNA) with sensitivity enhancement of 3–5 orders of magnitude and improved dynamic range.     

A convenient guideline to determine if two Y‐STR profiles are from the same lineage

Y chromosome STR loci are used in forensics primarily for identification purposes by determining the male lineages. The Henan province in China has established a large Y‐STR (>200 000 profiles) database for criminal investigations. A large proportion of the Y‐STR profiles in the database were generated using either the Applied Biosystems Yfiler^? or Yfiler^? Plus PCR Amplification kits. The additional loci in the Yfiler Plus kit as compared to the Yfiler kit results in a concomitant cumulative mutation rate increase across the loci. Therefore, in those cases when two profiles have one to a few mismatched loci, it is difficult to determine if they are from the same lineage. In this study, 7405 unrelated male profiles were manually selected from the database. Analysis showed higher power of discrimination than the corresponding Yfiler haplotypes. Further, the distributions of the number of mismatched loci and the mismatched steps were generated for father‐son, grandfather‐grandson, uncle‐nephew, and cousins (i.e. one, two, three, and four meioses, respectively) by exhaustive pairwise comparison of the unrelated profiles using a dynamic programming approach. The same distributions were generated for unrelated pairs with mutation rates of the loci. With the distributions, the false negative and false positive rates were determined. Two Yfiler profiles with ≤2 mismatched loci or ≤2 steps are more likely from the same lineage than unrelated lineages, and two Yfiler Plus profiles with ≤4 mismatched loci or ≤5 mismatched steps are more likely from the same lineage.     

Green fabrication of sandwich-like and dodecahedral C@Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@C as high-performance anode for lithium-ion batteries

Sandwich-structured C@Fe₃O₄@C hybrids with Fe₃O₄ nanoparticles sandwiched between two conductive carbon layers have attracted more and more attention owing to enhanced synergistic effects for lithium-ion storage. In this work, an environment-friendly procedure is developed for the fabrication of sandwich-like C@Fe₃O₄@C dodecahedrons. Zeolitic imidazolate framework (ZIF-8)-derived carbon dodecahedrons (ZIF-C) are used as the carbon matrix, on which iron precursors are homogeneously grown with the assistance of a polyelectrolyte layer. The subsequent polydopamine (PDA) coating and calcination give rise to the formation of sandwiched ZIF-C@Fe₃O₄@C. When being evaluated as the anode material for lithium-ion batteries, the obtained hybrid manifests a high reversible capacity (1194 mAh g^?1 at 0.05 A g^?1), good high-rate behavior (796 mAh g^?1 at 10 A g^?1), and negligible capacity loss after 120 cycles.     

Influence of metal electrodes on c‐axis orientation of AlN thin films deposited by DC magnetron sputtering

Nanocrystalline aluminum nitride (AlN) thin films were deposited on two types of metallic seed layers on silicon substrates, (111) textured Pt and (110) Mo, by reactive DC magnetron sputtering at low temperature (200 °C). Both textured films of Pt and Mo promote nucleation, thereby improving the crystallinity and epitaxial growth condition for AlN thin films. The deposited films were examined by X‐ray diffraction, scanning electron microscopy and atomic force microscopy techniques. The results indicated that the preferred orientation of crystallites greatly depends upon the kinetic energy of the sputtered species (target power) and seed layers used. Furthermore, AlN thin films with c‐axis perpendicular to the substrate grew on both types of metal electrodes at all power levels larger than 100 W. By comparing the structural properties and compressive stresses at perfect c‐axis orientation conditions, it is evident that AlN films deposited on (110) oriented Mo substrates exhibited superior properties as compared with Pt/Ti seed layers. Furthermore, less values of compressive stresses (?3 GPa) as compared with Pt/Ti substrates (?7.08 GPa) make Mo preferentially better candidate to be employed in the field of suspended Micro/Nano ‐ electromechanical systems (MEMS/NEMS) for piezoelectric devices. Copyright © 2017 John Wiley & Sons, Ltd.