LiFePO<Subscript>4</Subscript> synthesized via melt synthesis using low-cost iron precursors

LiFePO₄/C material has been prepared using fast-melt synthesis method followed by grinding and carbon coating. The low-cost iron ore concentrate (IOC) and purified iron ore concentrate (IOP) were used as iron precursors in the melt process to reduce significantly the cost of LiFePO₄/C. The same product was also synthesized using pure Fe₂O₃ under similar conditions as reference. The physical-chemical and electrochemical properties of samples were investigated. The X-ray Diffraction (XRD) results confirm the formation of an olivine structure of LiFePO₄ with a minor amount of Li₃PO₄ and Li₄P₂O₇ impurities for all the samples but no Fe₂P. The power performances of LiFePO₄/C using low-cost iron precursors were close to the sample using pure Fe₂O₃ precursor although capacity in mAh g^?1 is somewhat lower. With the inherent presence of silicon and other metals species, multi-substitution may take place when using IOC as source of iron leading to a Li(Fe_1-yM_y)(P_1-xSi_x)O₄ general composition. Multi-substitution, however, allows a better cycling stability. Therefore, these iron precursors present a promising option in this field to reduce the cost of a large-scale synthesis of LiFePO₄/C for Li-ion batteries application.     

Acid-Catalyzed E-Ring Expansion and Isomerization of 3-Acetylbetulin: Synthesis of Cytotoxic Anhydrobetulin Saponins

22(17 → 28)abeo-Lupene derivatives 5a and 6a were obtained after the acid-catalyzed E-ring expansion of 3-acetylbetulin (1a). Glycosylation of these dehydrated triterpenoids using Schmidt's trichloroacetimidate sugar donors in the presence of trimethylsilyl trifluoromethanesulfonate (TMSOTf) provided the new anhydrobetulin saponins 7b–7e in which the terminal olefin C-20(29) isomerizes to form a C-19 tetrasubstituted alkene. The preliminary cytotoxic evaluation revealed that saponins 7b–7d exhibited a moderate cytotoxic activity against A549, DLD-1, and WS1 human cell lines with IC₅₀ ranging from 22 to 49 μM.     

Polypropylene/Cellulosic Fiber Composites Chemical Treatment of the Cellulose Assuming Compatibilization Between the Two Materials

Abstract

The present work deals with the realization of composites with a polypropylene (PP) matrix and cellulosic fibers as reinforcement. In order to achieve a good adhesion with the PP matrix, the modification of different cellulosic fibers has been performed with various chemical functions: carboxylic anhydrides, isocyanates, vinylsulfone, and chlorotriazine systems. All these compatibilizing agents carry an alkyl chain or a PP chain. Grafting is evidenced by infrared and ESCA spectroscopies, and the grafting rates for the different chemicals are determined by microweighing measurements. Modification of the surface characteristics is followed by wettability tests and inverse gas chromatography. Determination of the water sorption isotherm for the treated fibers shows an important decrease in water regain in the case of isocyanate treatments in swelling medium. Enhancement of adhesion between fibers and the matrix is demonstrated by mechanical tests: the interfacial shear stress obtained by the microbond test increases by 70% for cellulosic fibers treated with maleated PP. This may be the result of entanglements between PP chains, but for macrocomposites the effect is much more limited due to the predominance of external factors during development of the composite.     

Seeding Molecular Rotators on a Passivated Silicon Surface

Thermally activated rotation of single molecules adsorbed on a silicon‐based surface between 77 and 150 K has been successfully achieved. This remarkable phenomenon relies on a nanoporous supramolecular network, which acts as a template to seed periodic molecule rotors on the surface. Thermal activation of rotation has been demonstrated by STM experiments and confirmed by theoretical calculations.     

Development of ion-conducting polymer electrolytes for use in high-energy lithium rechargeable batteries

Polymers based on poly(thylene oxide) (PEO) are a very promising new type of stable electrolytes for lithium rechargeable batteries. Their relatively low ionic conductivities can be more than compensated by the very small electrolyte thicknesses that can be used. Specific energies of 100 Wh/kg at sustained specific powers of 70 W/kg, have been obtained at Hydro-Québec with 100 μm of PEO electrolyte at 100°C. In an electric vehicle, this would give a driving range of over 300 km at 80 km/h, more than three times as much as lead-acid batteries. PEO-related polymers have been developed for lower temperature applications such as computers or portable appliances. Advantages over competitive Ni-Cd batteries are higher energy densities and absence of self-discharge, with expected shell lifes of 10 years. Laboratory prototypes (3600 cm², 10 Wh) demonstrate the absence of scale-up effects and excellent cycling capability (over 300 charge-discharge cycles).