Determination of nitric acid concentration by using europium ion fluorescence

A method is presented for the determination of 2-10M nitric acid based on the fact that the presence of high nitric acid concentration causes an enhancement of the intensity of some bands in the fluorescence spectra of rare earth ions in solution. The 616-nm band of Eu(3+) shows the most dramatic intensity enhancement with increasing nitric acid concentration. The present method, based on the measurement of the ratio of Eu(3+) fluorescent band intensities is shown to be independent of Eu(3+) concentration and relatively free of interference. This robust method allows the presence of an interferent to be determined from the experimental data.     

Elaboration of a programmed,semi-automated radiochemical processing system for neutron activation analysis of some volatile elements

Based on the method of SAMSAHL a programmed, semi-automated processing system has been developed and tested for the neutron activation analysis of the following elements: As, Se, Sb, Br, Sn and Te. The main characteristics of the procedure are the following: wet ashing of the sample (by means of digestion in a mixture of concentrated sulphuric acid and hydrogen peroxide), bromination, and chlorination. The procedure is controlled via the appropriate dosage of the reagents and a carefully managed thermal balance. The chemical yield and its reproducibility were determined by tracer techniques using exactly the same parameters as for the active runs. According to the results the method can be used for the routine determination of the given elements except antimony. Presented at the 4th Symposium on the Recent Developments in Neutron Activation Analysis, 1975, Cambridge.     

Oxidation with Fremy's salt—VIII : Peri-effect of a group located at the C5 position of 1-naphthol and related compounds

It has been shown by a series of experiments on 5-alkyl, 5-halo-, and other 5-substituted 1-naphthol derivatives that the product ratio of the ortho- and para-naphthoquinones formed on oxidation with Fremy's salt is controlled by the bulkiness of the C₅-substituent.     

Vapor-phase raman spectrum and ring-puckering vibration of cyclopentene

The vapor-phase Raman spectrum of cyclopentene has been recorded and eleven lines corresponding to the Δν=2 transitions of the ring-puckering have been observed. A difference band sequence with 3070.4cm⁻¹ as the reference band has also been observed.     

Behavior and characteristics of biogenic amines, ornithine and lysine derivatized with the o-phthalaldehyde-ethanethiol-fluorenylmethyl chloroformate reagent

The stability and characteristics of the ornithine (Orn), lysine (Lys), putrescine (Put), cadaverine (Cad), 1,7-diaminoheptane (Diah), spermidine (Spd) and spermine (Spm) derivatives obtained with the o-phthalaldehyde (OPA)-ethanethiol (ET)-fluorenylmethyl chloroformate (FMOC) reagent has been investigated. The stoichiometry of the introduced, two-step derivatization process has been followed by photodiode array (DAD) and fluorescence (FL) detections, simultaneously, while the composition of derivatives was confirmed by on-line HPLC-electrospray ionization (ESI) MS measurements. Depending on the composition of the OPA reagents, in addition to the secondary amino group-containing Spd and Spm, under common aqueous conditions also Orn and Lys do react with FMOC resulting in derivatives of various compositions. Applying the OPA-ET reagent of increasing methanol (Met) content (38-80%, v/v) the formation of the FMOC group containing Orn and Lys derivatives could be considerably decreased. Optimum elution condition (18 min, including equilibration) was developed for the simultaneous quantitation of Orn, Lys, Put, Cad, Diah, Spd and Spm, in the presence of the rest of protein amino acids. The practical utility of the method was demonstrated by the analysis of mouse tissues. Average reproducibility of quantitations, characterized with the relative standard deviation percentages of fluorescence intensities and UV responses, in order of listing, proved to be 2.1% and 2.1%, respectively.     

Influence of neutral cyclodextrin concentration on plate numbers in capillary electrophoresis

A quantitative theory of plate number N in capillary electrophoresis was developed for buffers containing neutral cyclodextrins (CDs) capable of forming inclusion complexes. In the theory, N was modeled by longitudinal diffusion, injection extent, width of the detection window, and the detector time constant. The apparent mobility was modeled as a weighted sum of the mobilities of the free-solution analyte and the inclusion complex. The apparent diffusion coefficient was modeled as a similarly weighted sum. Both the apparent mobility and diffusion coefficient were corrected by functions that compensated for increases of buffer temperature caused by Joule heat. The experimental N's and apparent mobilities of neutral thiourea and of the anions, dansyl D- and L-leucine, dansyl D- and L-aspartic acid, benzoate, and 4-nitrophenolate, were determined in buffers containing from 0 to 15 mM beta-CD. The binding constants, and mobilities and diffusion coefficients of the free-solution analyte and inclusion complex, were calculated as regression coefficients by fitting theory to these determinations. The regression coefficients were shown to have physicochemical meaning, as assessed by literature values, independent measurements, and theoretical predictions. The assessment showed the Nernst-Einstein equation does not relate mobilities and diffusion coefficients at the electrolyte concentration used. The interdependence of mobilities, diffusion coefficients, binding constants, and other dispersion sources was interpreted to evaluate the factors affecting the variation of N with CD concentration. From the interpretation, an approximate equation for N in low-concentration CD buffers was derived. The equation depends on free-solution and inclusion-complex mobilities and diffusion coefficients, the binding constant, the potential difference over the effective capillary length, and the number of plates in a CD-free buffer.     

Near infrared reflectance spectroscopy for the fast identification of PVC-based films

Near infrared (NIR) reflectance spectroscopy was used to develop a non-destructive and rapid qualitative method for the analysis of plastic films used by the pharmaceutical industry for blistering. Three types of films were investigated: 250 microm PVC [poly(vinyl chloride)] films, 250 microm PVC films coated with 40 g m(-2) of PVDC [poly(vinylidene dichloride)] and 250 microm PVC films coated with 5 g m(-2) of TE (Thermoelast) and 90 g m(-2) of PVDC. Three analyses were carried out using different pre-treatment options and a PLS (partial least squares) algorithm. Each analysis was aimed at identifying one type of film and rejecting all types of false sample (different thickness, colour or layer). True and false samples from four plastics manufacturers were included in the calibration sets in order to obtain robust methods that were suitable regardless of the supplier. Specificity was demonstrated by testing validation sets against the methods. The tests showed 0% of type I (false negative identification) and 1% of type II errors (false positive identification) for the PVC method, 13 and 3%, respectively, for the PVC-PVDC method and no error for the PVC-TE-PVDC method. Type II errors, mostly due to the slight sensitivity of the methods to film thickness, are easily corrected by simple thickness measurements. This study demonstrates that NIR spectroscopy is an excellent tool for the identification of PVC-based films. The three methods can be used by the pharmaceutical industry or plastics manufacturers for the quality control of films used in blister packaging.     

Investigation of trifluoroacetolysis of some 2-bromoethanol arylsulfonates

Conclusions By PMR spectroscopy the kinetics of trifluoroacetolysis of 2-bromoethyl-2,2-d₂-toluene and 2-bromoethyl-2,2-d₂-anisole sulfonates, the dependence of rate constant on the presence of lithium perchlorate and on salts with a common ion were investigated. The trifluoroacetolysis of 2-bromoethyl-2,2-d₂-toluene-d₇-sulfonate in the presence of the lithium salt of nondeuterated toluenesulfonic acid was investigated. It was shown that reaction is accompanied by isomerization of the initial sulfonate (1,2-migration of bromine) and occurs by an ion pair mechanism.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 371–375, February, 1987.