10-Gbit/s optical receiver using ICs with low-capacitance HBT technology

A 10-Gbit/s optical receiver is developed using low-capacitance HBT IC technology. The HBT allows a cutoff frequency of 45 GHz and a maximum oscillation frequency of 70 GHz. The receiver contains an automatic gain-control amplifier IC with a gain of 16 dB, a bandwidth of 10.7 GHz, and a decision-circuit IC with an ambiguity of 66 mVp-p at a data rate of 10 Gbit/s. The sensitivity of this receiver is -26.5 dBm at a bit error rate of 10^-9. Transmission over a 140-km fiber was achieved successfully.     

Mössbauer study of small amounts of iron in graphite,around the diamond-graphite pressure-temperature stability region

An exploratory Mössbauer spectroscopy study of the Fe-C system in the C rich region, prepared by high pressure-high temperature treatment near the graphite-diamond stability line, was made. The results obtained for the different processing conditions give no evidence of Fe intercalation in graphite. The presence of some water in the cell produced hydrated Fe complexes, which can explain the deleterious effect of water or hydrogen in the high pressure diamond synthesis.     

Synthesis and properties of Hg-based high-T c superconductors

Il Nuovo Cimento D - The formation of Hg-based HTSC materials was investigated through the development of non-conventional techniques. The former was based on a singlestep synthesis at temperatures...     

Application of thermal analysis to study the causes of disintegration in insulating systems

In the procduction of high-voltage insulating systems, disintegration and non-homogeneity occur in some cases and these factors can lead to the deterioration and even the breakdown such systems. In research into the causes of these phenomena DTA and TG were applied to study the course of hardening of the systems and to quantify the leaking substances. The results demonstrate the great value of thermal analysis in this field.     

High-performance liquid chromatographic method for quantitating plasma levels of amiloride and its analogues.

An assay for amiloride was devised for efficient use with the wide variety of analogues available. Amiloride was extracted from 1-ml plasma samples by elution from a C8 preparative column with 6% acetonitrile-45% methanol-5.4% acetic acid, adjusted to pH 4.0 with trimethylamine. Samples were lyophilized, resuspended in 50% methanol, filtered through 0.22-microns Spin-X cartridges, applied to a reversed-phase C18 column, and eluted in a 0-50% acetonitrile gradient in 0.4% acetic acid, pH 4.5 (1.2 ml/min). Detection by ultraviolet absorbance at 360 nm was linear from 1 to 1000 ng. Versatility of the method was demonstrated with the analogues benzamil, 6-hydro-, 6-iodo-, 5-hexamethylene-, and 5-chlorobenzyl-2',4'-dimethylbenzyl-amiloride.     

Stirling渐进公式的一个新的构造证明

本文用简易的分析工具，对ｎ！给出了一个精确等式，从而导出Ｓｔｉｒｌｉｎｇ渐近公式（２）的一个新的简短证明.     

Magic neutrino mass matrix and the Bjorken–Harrison–Scott parameterization

Observed neutrino mixing can be described by a tribimaximal MNS matrix. The resulting neutrino mass matrix in the basis of a diagonal charged lepton mass matrix is both 2–3 symmetric and magic. By a magic matrix, I mean one whose row sums and column sums are all identical. I study what happens if 2–3 symmetry is broken but the magic symmetry is kept intact. In that case, the mixing matrix is parameterized by a single complex parameter U_e3, in a form discussed recently by Bjorken, Harrison, and Scott.     

A high-current electron beam ion trap as an on-line charge breeder for the high precision mass measurement TITAN experiment

The precision of atomic mass measurements in a Penning trap is directly proportional to the charge state q of the ion and, hence, can be increased by using highly charged ions (HCI). For this reason, charge breeding with an electron beam ion trap (EBIT) is employed at TRIUMF’s Ion Trap for Atomic and Nuclear science (TITAN) on-line facility in Vancouver, Canada. By bombarding the injected and trapped singly charged ions with an intense beam of electrons, the charge state of the ions is rapidly increased inside the EBIT. To be compatible with the on-line requirements of short-lived isotopes, very high electron beam current densities are needed. The TITAN EBIT includes a 6 Tesla superconducting magnet and is designed to have electron beam currents and energies of up to 5 A and 60 keV, respectively. Once operational at full capacity, most species can be bred into a He-like configuration within tens of ms. Subsequently, the HCI are extracted, pass a Wien filter to reduce isobaric contamination, are cooled, and injected into a precision Penning trap for mass measurement. We will present the first results and current status of the TITAN EBIT, which has recently been moved to TRIUMF after assembly and commissioning at the Max-Planck-Institute (MPI) for Nuclear Physics in Heidelberg, Germany.