Thionation of a cyanoxime derivative to form the sulphur-containing derivative,a novel ligand for complexation with transitional metal ions

Structural Chemistry - 2-Cyano-2-(hydroxyimino)dithioacetic acid was prepared starting from cyanoacetic acid methylester via 2-cyano-2-(hydroxyimino)acetic acid methylester. Before thionation, the...     

Simple-direct-modules

A right R-module M is called simple-direct-injective if, whenever, A and B are simple submodules of M with A?B, and B?^⊕M, then A?^⊕M. Dually, M is called simple-direct-projective if, whenever, A and B are submodules of M with M∕A?B?^⊕M and B simple, then A?^⊕M. In this paper, we continue our investigation of these classes of modules strengthening many of the established results on the subject. For example, we show that a ring R is uniserial (artinian serial) with J²(R) = 0 iff every simple-direct-projective right R-module is an SSP-module (SIP-module) iff every simple-direct-injective right R-module is an SIP-module (SSP-module).     

Gas and Particle Dynamics of a Contoured Shock Tube for Pre-clinical Microparticle Drug Delivery

We investigate the gas-particle dynamics of a device designed for biological pre-clinical experiments. The device uses transonic/supersonic gas flow to accelerate microparticles such that they penetrate the outer skin layers. By using a shock tube coupled to a correctly expanded nozzle, a quasi-one-dimensional, quasi-steady flow (QSF) is produced to uniformly accelerate the microparticles. The system utilises a microparticle “cassette” (a diaphragm sealed container) that incorporates a jet mixing mechanism to stir the particles prior to diaphragm rupture. Pressure measurements reveal that a QSF exit period – suitable for uniformly accelerating microparticles – exists between 155 and 220 mus after diaphragm rupture. Immediately preceding the QSF period, a starting process secondary shock was shown to form with its (x,t) trajectory comparing well to theoretical estimates. To characterise the microparticle, flow particle image velocimetry experiments were conducted at the nozzle exit, using particle payloads with varying diameter (2.7–48 μm), density (600–16,800 kg/m³) and mass (0.25–10 mg). The resultant microparticle velocities were temporally uniform. The experiments also show that the starting process does not significantly influence the microparticle nozzle exit velocities. The velocity distribution across the nozzle exit was also uniform for the majority of microparticle types tested. For payload masses typically used in pre-clinical drug and vaccine applications (≤ 1 mg), it was demonstrated that payload scaling does not affect the microparticle exit velocities. These characteristics show that the microparticle exit conditions are well controlled and are in agreement with ideal theory. These features combined with an attention to the practical requirements of a pre-clinical system make the device suitable for investigating microparticle penetration into the skin for drug delivery.     

Labelless impedance immunosensor based on polypyrrole-pyrolecarboxylic acid copolymer for hCG detection

In this work, a sensitive label-free impedimetric hCG-immunosensor was constructed by using a commercial screen-printing carbon ink electrode (namely disposable electrochemical printed chip) as the basis. The carbon ink electrode of DEP chip is modified first by deposition of polypyrrole-pyrole-2-carboxylic acid copolymer and thence hCG antibody immobilization via the COOH groups of pyrrole-2-carboxylic acid, which can serve as a linker for covalent biomolecular immobilization. The experimental results exposed that the designed immunosensor is more sensitive than other previously reported immunosensors, in the case of detection limit and linear range for antigen detection. With optimal fabrication parameters, the detection limit for α-hCG was 2.3 pg/mL in 10 mM phosphate buffer saline (PBS) solution containing 1% bovine serum albumine (BSA). Moreover, the use of inexpensive DEP chip as a basis for these immunosensors will allow for simple instrumentation, disposable and portable at low cost. This work also demonstrates a new approach to develop a sensitive and label-free impedimetric immunosensor based on screen-printed electrode for applications in clinical diagnosis.     

Ca-Mediated Synthetic Biosystems Offer Protein Design Versatility, Signal Specificity, and Pathway Rewiring

Synthetic biosystems have been engineered that enable control of metazoan cell morphology, migration, and death. These systems possess signal specificity, but lack flexibility of input signal. To exploit the potential of Ca²⁺ signaling, we designed RhoA chimeras for reversible, Ca²⁺-dependent control over RhoA morphology and migration. First, we inserted a calmodulin-binding peptide into a RhoA loop that activates or deactivates RhoA in response to Ca²⁺ signals depending on the chosen peptide. Second, we localized the Ca²⁺-activated RhoA chimera to the plasma membrane, where it responded specifically to local Ca²⁺ signals. Third, input control of RhoA morphology was rewired by coexpressing the Ca²⁺-activated RhoA chimera with Ca²⁺-transport proteins using acetylcholine, store-operated Ca²⁺ entry, and blue light. Engineering synthetic biological systems with input versatility and tunable spatiotemporal responses motivates further application of Ca²⁺ signaling in this field.     

Variable-step variable-order 3-stage Hermite-Birkhoff-Obrechkoff DDE solver of order 4 to 14

This article presents a solver for delay differential equations (DDEs) called HBO414DDE based on a hybrid variable-step variable-order 3-stage Hermite-Birkhoff-Obrechkoff ODE solver of order 4 to 14. The current version of our method solves DDEs with state dependent, non-vanishing, small, vanishing and asymptotically vanishing delays, except neutral type and initial value DDEs. Delayed values are computed using Hermite interpolation, small delays are dealt with by extrapolation, and discontinuities are located by a bisection method. HBO414DDE was tested on several problems and results were compared with those of known solvers like SYSDEL and the recent Matlab DDE solver ddesd and statistics show that it gives, most of the time, a smaller relative error than the other solvers for the same number of function evaluations.     

Strong-stability-preserving 3-stage Hermite-Birkhoff time-discretization methods

Strong-stability-preserving (SSP) time-discretization methods have a nonlinear stability property that makes them particularly suitable for the integration of hyperbolic conservation laws. A collection of SSP explicit 3-stage Hermite-Birkhoff methods of orders 3 to 7 with nonnegative coefficients are constructed as k-step analogues of third-order Runge-Kutta methods, incorporating a function evaluation at two off-step points. Generally, these new methods have larger effective CFL coefficients than the hybrid methods of Huang with the same step number k. They have larger maximum scaled step sizes than hybrid methods on Burgers' equations.     

Enhanced stability by three-dimensional aromaticity of endohedrally doped clusters X(10)M(0/-) with X = Ge, Sn, Pb and M = Cu, Ag, Au

The group 14 clusters encapsulated by coinage metals in neutral and anionic states X(10)M(0/-) (X = Ge, Sn, Pb and M = Cu, Ag, Au) are investigated using quantum chemical calculations with the DFT/B3LYP functional and coupled-cluster CCSD(T) theory. Addition of transition metals into the empty cages forms high symmetry endohedral structures, except for Ge(10)Ag(0/-). In agreement with experiments available for X(10)Cu, the D(4d) global minima of the anions are calculated to be magic clusters with large frontier orbital gaps, high vertical and adiabatic detachment energies, and large embedding energies and binding energies as compared to those of the empty cages X(10)(2-). The enhanced stability of these magic clusters can be rationalized by the three-dimensional aromaticity.     

Electronic structures, vibrational and thermochemical properties of neutral and charged niobium clusters Nb(n), n = 7-12

Geometric and electronic structures, vibrational properties, and relative stabilities of niobium clusters Nb(n), n = 7-12, are studied using both DFT (BPW91 and M06 functionals) and CCSD(T) calculations with the cc-pVnZ-PP basis set. In each cluster, various lower-lying states are very close in energy in such a way that the ground state cannot be unambiguously established by DFT computations. Nb clusters tend to prefer the lowest possible spin state as the ground state, except for Nb(12) ((3)A(g)). The optimal structure of the cluster at a certain size does not simply grow from that of the smaller one by adding an atom randomly. Instead, the Nb clusters prefer a close-packed growth behavior. Nb(10) has a spherically aromatic character, high chemical hardness and large HOMO-LUMO gap. Electron affinities, ionization energies, binding energy per atom, and the stepwise dissociation energies are evaluated. Energetic properties exhibit odd-even oscillations. Comparison with experimental values shows that both BPW91 and M06 functionals are reliable in predicting the EA and IE values, but the BPW91 is deficient in predicting the binding and dissociation energies. We re-examine in particular the experimental far IR spectra previously recorded using the IR-MPD and free electron laser spectrometric techniques and propose novel assignments for Nb(7) and Nb(9) systems. The IR spectra of the anions are also predicted.     

Analysis of Pathogenic Bacterial and Yeast Biofilms Using the Combination of Synchrotron ATR-FTIR Microspectroscopy and Chemometric Approaches

Biofilms are assemblages of microbial cells, extracellular polymeric substances (EPS), and other components extracted from the environment in which they develop. Within biofilms, the spatial distribution of these components can vary. Here we present a fundamental characterization study to show differences between biofilms formed by Gram-positive methicillin-resistant Staphylococcus aureus (MRSA), Gram-negative Pseudomonas aeruginosa, and the yeast-type Candida albicans using synchrotron macro attenuated total reflectance-Fourier transform infrared (ATR-FTIR) microspectroscopy. We were able to characterise the pathogenic biofilms’ heterogeneous distribution, which is challenging to do using traditional techniques. Multivariate analyses revealed that the polysaccharides area (1200–950 cm⁻¹) accounted for the most significant variance between biofilm samples, and other spectral regions corresponding to amides, lipids, and polysaccharides all contributed to sample variation. In general, this study will advance our understanding of microbial biofilms and serve as a model for future research on how to use synchrotron source ATR-FTIR microspectroscopy to analyse their variations and spatial arrangements.