Rheological properties of the aqueous mixtures of cationic-anionic surfactants

The rheological properties of the aqueous mixtures of cationic-anionic surfactants, both in single-phase systems and in aqueous two-phase systems, have been studied. Bizarre rheological properties —negative thixotropy, viscoelasticity and hihg viscosity of shear rate dependent at relatively low concentration — have been observed. An unusual viscosity change, that is, viscosity lowering with increasing concentration, was obtained. The negative thixotropy might be due to the existence of lamellar or sheet-like micelles, viscoelasticity might be induced by rodlike and lamellar or sheet-like micelles, the high viscosity might be a consequence of the formation of network by long rodlike micelles and the concentration-induced viscosity lowering could be interpreted in terms of the decrease of micellar dimensions with concentration.     

Trypsin activity assay in substrate-specific one- and two-dimensional gels: a powerful method to separate and characterize novel proteases in active form in biological samples

To separate and identify the proteases, a substrate-specific, sensitive assay in sodium dodecyl sulfate (SDS)-polyacrylamide gels after two-dimensional (2-D) electrophoresis has been developed. This method allows simultaneous determination of protease cleavage specificity, molecular weight, isoelectric point, and if necessary, amino acid sequencing. After isoelectric focusing in immobilized pH gradient (IPG) strips (pH 6-11) (first dimension), trypsin was electrophoresed in 12% SDS polyacrylamide gels (second dimension) copolymerized with Boc-Gln-Ala-Arg-MCA (4-methyl-coumaryl-7-amide). The gels were washed in cold 2.5% Triton X-100 and water, and incubated in assay buffer (6.3 mM Bicine, 100 mM NaCl). Trypsin cleavage of the peptide-MCA generated fluorescent 7-amino-4-methyl-coumarin. In 1-D gels, as low as 500 pg trypsin could be detected and trypsin band volumes correlated linearly with the amounts of trypsin (R(2) = 0.999). In 2-D gels, the lowest amount of trypsin detected was 1 ng. The linear regression of spot volume and loading amount was still good (R(2) = 0.974). To optimize renaturation conditions, 5x5 min washes with 2.5% Triton X-100 and water, respectively, gave the strongest band volume. For fluorescence development, an assay buffer at pH 9 was the best; incubation at 37 degrees C for 30 min was sufficient. The method has application for identifying novel proteases as it does not rely on antibodies.     

Baylis-Hillman reactions of N-tosyl aldimines and aryl aldehydes with 3-methylpenta-3,4-dien-2-one

The attempted Baylis-Hillman reactions of N-tosyl aldimines and aryl aldehydes with 3-methylpenta-3,4-dien-2-one gave the corresponding Baylis-Hillman adducts 3 and 6 in moderate to good yields in the presence of DMAP in DMSO, respectively. In the case of the aza-Baylis-Hillman reactions of N-tosyl aldimines with 3-methylpenta-3,4-dien-2-one catalyzed by PBu3, the corresponding aza-Baylis-Hillman derivatives 4 and 5 were formed at the same time.     

Immunosuppressive ent‐Kaurene Diterpenoids from Isodon serra

Three new enmein‐type ent‐kaurenoids, i.e., the two pairs 1 and 2 of 20‐epimers and the (20R)‐isomer 3 , besides the seven known diterpenoids 4 – 10 , were isolated from the aerial parts of Isodon serra. Their structures were elucidated by spectroscopic techniques and X‐ray diffraction. The immunosuppressive effect for T‐lymphocytes proliferation induced by Con A in BALB/c mouse was evaluated for the isolates 1 – 10 . They all displayed a remarkable inhibitory effect, with multi‐glycosides of Tripterygium wilfordii as positive reference substance (Table 3).     

Influences of hydration force and elastic strain energy on the stability of solid film in a very thin solid-on-liquid structure

Since hydration forces become very strong at short range and are particularly important for determining the magnitude of the adhesion between two surfaces or interaction energy, the influences of the hydration force and elastic strain energy due to hydration-induced layering of liquid molecules close to a solid film surface on the stability of a solid film in a solid-on-liquid (SOL) nanostructure are studied in this paper. The liquid of this thin SOL structure is a kind of water solution. Since the surface forces play an important role in the structure, the total free energy change of SOL structures consists of the changes in the bulk elastic energy within the solid film, the surface energy at the solid-liquid interface and the solid-air interface, and highly nonlinear volumetric component associated with interfacial forces. The critical wavelength of one-dimensional undulation, the critical thickness of the solid film, and the critical thickness of the liquid layer are studied, and the stability regions of the solid film have been determined. Emphasis is placed on calculation of critical values, which are the basis of analyzing the stability of the very thin solid film.     

Homolytic C-H and N-H bond dissociation energies of strained organic compounds

High-level computations at G3, CBS-Q, and G3B3 levels were conducted, and good-quality C-H and N-H bond dissociation energies (BDEs) were obtained for a variety of saturated and unsaturated strained hydrocarbons and amines for the first time. From detailed NBO analyses, we found that the C-H BDEs of hydrocarbons are determined mainly by the hybridization of the parent compound, the hybridization of the radical, and the extent of spin delocalization of the radical. The ring strain has a significant effect on the C-H BDE because it forces the parent compound and radical to adopt certain undesirable hybridization. A structure-activity relationship equation (i.e., BDE (C-H) = 61.1-227.8 (p(parent)% - 0.75)(2) + 152.9 (p(radical)% - 1.00)(2) + 40.4 spin) was established, and it can predict the C-H BDEs of a variety of saturated and unsaturated strained hydrocarbons fairly well. For the C-H BDEs associated with the bridgehead carbons of the highly rigid strained compounds, we found that the strength of the C-H bond can also be predicted from the H-C-C bond angles of the bridgehead carbon. Finally, we found that N-H BDEs show less dependence on the ring strain than C-H BDEs.     

Sorption of 241Am by Aspergillus nigerspore and hyphae

Biosorption of ²⁴¹Am by a fungus A. niger, including the spore and hyphae, was investigated. The preliminary results showed that the adsorption of ²⁴¹Am by the microorganism was efficient. More than 96% of the total ²⁴¹Am could be removed from ²⁴¹Am solutions of 5.6-111 MBq/l (C _o) by spore and hyphaeof A. niger, with adsorbed ²⁴¹Am metal (Q) of 7.2-142.4 MBq/g biomass, and 5.2-106.5 MBq/g, respectively. The biosorption equilibrium was achieved within 1 hour and the optimum pH range was pH 1-3. No obvious effects on ²⁴¹Am adsorption by the fungus were observed at 10-45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above the ²⁴¹Am concentration. The ²⁴¹Am biosorption by the fungus obeys the Freundlich adsorption equation. There was no significant difference between the adsorption behavior of A. nigerspore and hyphae. This revised version was published online in July 2006 with corrections to the Cover Date.     

Adsorptive stripping measurements of germanium(IV) in the presence of pyrogallol

The adsorptive stripping voltammetric determination of germanium(IV) based on the adsorptive accumulation of the germanium(IV)-pyrogallol complex on a hanging mercury drop electrode is reported. The reduction current of the adsorbed germanium complex is measured by differential-pulse cathodic stripping voltammetry. The peak potential is at -0.42 V vs. Ag AgCl (saturated KCL). The effects of various parameters (ligand concentration, supporting electrolytic composition and concentration, accumulation potential and collection time) on the response are discussed. With controlled accumulation for 3 min, the detection limit is 1.2 x 10(-9) M germanium. The relative standard deviation (at 1.2 x 10(-8) M germanium) is 3.6%. Possible interferences are evaluated. The applicability of the method to the determination of germanium(IV) in ore samples was also successfully carried out.     

STABILITY OF POLY（N,N＇-METHYLENEBISACRYLAMIDE-co-4-VINYLPYRIDINE） MICROGEL DISPERSION AND ADJUSTMENT OF THE HYDROPHOBICITY IN THE MICROGELS

In the UV-Vis spectra of pure light-scattering systems, there is an exponential relationship between absorbance and wavelength （A = Kλ^-n）. Here, the exponent n is named as flocculation-coagulation parameter. In the present paper, the effects of different additives on the stability of poly（N,N＇-methylenebisacrylamide-co-4-vinylpyridine） （poly（Bis-co-4-VP）） microgel dispersion were studied in detail via this parameter. The results showed that the stability of the dispersion mainly comes from the ionization of pyridine groups, making the microgel positively charged on its surface. This was confirmed by the measurement of Zeta potential and the result of conductometric titration. The result of fluorescence analysis indicated that the hydrophobicity in the microgels is enhanced with the increase in total 4-VP unit content.     

Rational design of an “all-in-one” phototheranostic

We report here porphodilactol derivatives and their corresponding metal complexes. These systems show promise as “all-in-one” phototheranostics and are predicated on a design strategy that involves controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation. The requisite balance was achieved by tuning the aromaticity of these porphyrinoid derivatives and forming complexes with one of two lanthanide cations, namely Gd³⁺ and Lu³⁺. The net result led to a metalloporphodilactol system, Gd-trans-2, with seemingly optimal ISC efficiency, photothermal conversion efficiency and fluorescence properties, as well as good chemical stability. Encapsulation of Gd-trans-2 within mesoporous silica nanoparticles (MSN) allowed its evaluation for tumour diagnosis and therapy. It was found to be effective as an “all-in-one” phototheranostic that allowed for NIR fluorescence/photoacoustic dual-modal imaging while providing an excellent combined PTT/PDT therapeutic efficacy in vitro and in vivo in 4T1-tumour-bearing mice.

We report here porphodilactol derivatives and their corresponding metal complexes as “all-in-one” phototheranostics by controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation.