改变激发环境调控Ho3+离子的上转换发光特性

稀土掺杂上转换发光材料的发光特性不仅依赖于基质材料本身,而且与其激发条件密切相关.本文主要是以Ho^3+离子为研究对象,在NaYF4和LiYF4这两种不同的基质中,研究其在不同激发条件下的上转换发光特性.通过共聚焦显微光谱测试系统,对比Ho^3+离子在NaYF4和LiYF4微米晶体中的发光特性.实验结果发现:Ho^3+离子在这两种不同基质中均展现出较强的荧光发射.然而,当激发功率增加时,在单颗粒个LiYF4微米晶体中,当激发功率增加时,Ho^3+离子则发射出较强绿光及微弱的红光,红绿比变化并不明显,其蓝光发射强度也相对较弱.当激发这两种微米粉末晶体时,结果发现:Ho^3+离子均发射较强的绿光发射并伴有微弱红光发射,两种晶体中的发射特性极其相似.由此可见,在常规测试条件下,一些特殊发光现象是很难被观测到的.同时,通过对其光谱特性的分析,对Ho^3+离子的发光机理进行了研究.     

Determination of structure parameters in strong-field ionization models of atoms

The Ammosov–Delone–Krainov (ADK) and Perelomov–Popov–Terent’ev (PPT) ionization models were widely used in strong-field physics and attosecond science due to their many attractive advantages such as simpler analytical formula, less computational demands, and satisfied accuracy of ionization rate. Based on the density-functional theory, we systematically determine accurate structure parameters of 25 atoms, 24 positive ions and 13 negative ions and tabulate for future applications. The wave function with correct asymptotic behavior is obtained by solving the time-independent Schrödinger equation with B-spline basis sets and the accurate structure parameters are extracted from this wave function in the asymptotic region. The accuracies of structure parameters are carefully examined by comparing the ionization probabilities (or yields) calculated by PPT and ADK models with those of solving the three-dimensional time-dependent Schrödinger equation and the experimental data.     

超强频率梳激光场驱动下多光子共振谐波辐射的相位突变研究

本文从理论上研究了在双色频率梳激光场驱动下多光子谐波辐射光谱中的相位突变现象。我们利用Floquet理论非微扰地模拟了频率梳激光场与原子分子等量子系统的相互作用过程。谐波辐射信号是多光子偶极跃迁相干叠加的结果,通过调节频率梳激光场间的相对相位,可以相干地控制谐波辐射信号的强度。通过对谐波信号进行傅里叶变换,可以提取不同跃迁路径的相对相位信息。我们通过改变频率梳组激光场的强度和频率组分实现多光子跃迁频率,让其跨越共振跃迁频率时,谐波相位会发生突变。从而可以观测超强激光场驱动下量子系统共振跃迁频率的斯塔克能移。     

基于简单MOPA结构实现3.08 kW全光纤窄线宽线偏振激光输出

基于简单的主振荡功率放大结构,演示了一种高功率窄线宽线性偏振全光纤激光器,其最大输出功率为3.08 kW,3 dB线宽为0.2 nm。在整个功率缩放过程中,偏振消光比约为94%,光束质量M 2约为1.4。这是国内外首次实现3 kW全保偏光纤激光输出,与基于相位调制的窄线宽激光器相比,该激光器可实现近似的线宽,同时具有受激布里渊散射阈值高、系统结构简单、成本低等特点。     

激光惯性约束聚变靶制备技术研究进展

在实验室实现聚变反应释放的能量大于点燃聚变反应所需能量的阈值是当今世界ICF研究的主要目标,实现这一目标仍需要深入研究一系列的关键物理问题。在ICF研究中,制靶能力的发展与提升至关重要,靶的质量是实验成功的核心要素之一。本文介绍了国际ICF靶制备工作近年来在新型烧蚀层材料靶丸、新型靶丸支撑技术、优化黑腔材料与构型以及减小燃料填充管直径等方面取得的一系列进展,并结合ICF物理需求,简要阐述了ICF靶的发展趋势。     

1200 V碳化硅功率MOSFET低温特性的实验表征及分析

碳化硅功率MOSFET是宽禁带功率半导体器件的典型代表,具有优异的电气性能。基于低温环境下的应用需求,研究了1200 V碳化硅功率MOSFET在77.7 K至300 K温区的静/动态特性,定性分析了温度对碳化硅功率MOSFET性能的影响。实验结果显示,温度从300 K降低至77.7 K时,阈值电压上升177.24%,漏-源极击穿电压降低32.99%,栅极泄漏电流降低82.51%,导通电阻升高1142.28%,零栅压漏电流降低89.84%(300 K至125 K)。双脉冲测试显示,开通时间增大8.59%,关断时间降低16.86%,开关损耗增加48%。分析发现,碳化硅功率MOSFET较高的界面态密度和较差的沟道迁移率,是导致其在低温下性能劣化的主要原因。     

Second harmonic magnetoacoustic responses of magnetic nanoparticles in magnetoacoustic tomography with magnetic induction

Due to the unique magnetic, mechanical and thermal properties, magnetic nanoparticles(MNPs) have comprehensive applications as the contrast and therapeutic agents in biomedical imaging and magnetic hyperthermia. The linear and nonlinear magnetoacoustic responses determined by the magnetic properties of MNPs have attracted more and more attention in biomedical engineering. By considering the relaxation time of MNPs, we derive the formulae of second harmonic magnetoacoustic responses(2H-MARs) for a cylindrical MNP solution model based on the mechanical oscillations of MNPs in magnetoacoustic tomography with magnetic induction(MAT-MI). It is proved that only the second harmonic magnetoacoustic oscillations can be generated by MNPs under an alternating magnetic excitation. The acoustic pressure of the 2H-MAR is proportional to the square of the magnetic field intensity and exhibits a linear increase with the concentration of MNPs. Numerical simulations of the 2H-MAR are confirmed by the experimental measurements for various magnetic field intensities and solution concentrations using a laser vibrometer. The favorable results demonstrate the feasibility of the harmonic measurements without the fundamental interference of the electromagnetic excitation, and suggest a new harmonic imaging strategy of MAT-MI for MNPs with enhanced spatial resolution and improved signal-to-noise ratio in biomedical applications.     

A reconfigurable terahertz polarization converter based on metal–graphene hybrid metasurface

A metal-graphene hybrid metasurface polarization converter is designed in this Letter.The unit cell of the hybrid metasurface is composed of a butterfly-shaped structure whose branches are connected by multi-layer graphene sheets.The proposed device can be reconfigured from linear-to-circular polarization to cross-polarization by changing the Fermi energy of graphene.The simulation results show that for three-layer graphene,the device acts as a linear-to-circular polarization converter when EF=0 eV and switches to a cross-polarization converter when EF=0.5 eV.Compared with single-layer graphene,the device with three-layer graphene can maintain the cross-polarization conversion performance under low Fermi energy.Furthermore,two equivalent circuits in the x and y directions are developed to understand the working mechanism of the device.     

Multicaloric and coupled-caloric effects

The multicaloric effect refers to the thermal response of a solid material driven by simultaneous or sequential application of more than one type of external field.For practical applications,the multicaloric effect is a potentially interesting strategy to improve the efficiency of refrigeration devices.Here,the state of the art in multi-field driven multicaloric effect is reviewed.The phenomenology and fundamental thermodynamics of the multicaloric effect are well established.A number of theoretical and experimental research approaches are covered.At present,the theoretical understanding of the multicaloric effect is thorough.However,due to the limitation of the current experimental technology,the experimental approach is still in progress.All these researches indicated that the thermal response and effective reversibility of multiferroic materials can be improved through multicaloric cycles to overcome the inherent limitations of the physical mechanisms behind single-field-induced caloric effects.Finally,the viewpoint of further developments is presented.