V3+:YAG晶体的生长、色心与光谱性能研究

采用石墨电阻加热的温梯法生长了V:YAG晶体,晶体的不同部位呈现两种不同的颜色:浅绿色和黄褐色.通过对比分析不同颜色V:YAG晶体的室温吸收光谱,推断出石墨发热体高温下扩散出来的C可以起到还原作用,提高晶体中V3+tetra离子的浓度,同时诱导了F心的形成.在1300℃下,对不同颜色的V:YAG晶体进行真空退火处理,发现处于八面体格位中的V3+离子在热激发作用下与近邻的四面体格位Al3+离子存在置换反应,由此产生一定浓度的四面体格位V3+离子.同时,F心在退火过程中被完全消除,释放出来的自由电子被高价态的V离子俘获,可以进一步提高晶体中四面体格位V3+离子的浓度.     

β-Si3N4电子结构和光学性质的第一性原理研究

采用基于密度泛函的平面波赝势方法(PWP)和广义梯度近似(GGA),计算了β相氮化硅(β-Si3N4)的电子结构和光学性质,得到的晶格常数、能带结构等均与实验结果较好符合.进一步还研究了β-Si3N4的光吸收系数以及禁带宽度随外压力的变化规律,为β-Si3N4材料在高压条件下的应用提供了理论参考.     

基于递推最小二乘的红外焦平面非均匀校正算法

根据递推最小二乘和图像配准原理,提出了基于递推最小二乘的红外焦平面非均匀校正算法(简称ILS算法),有效降低算法的时间和空间复杂度,使噪音图像的校正处理能够实时完成.ILS算法具有噪音参量估计准确度高、收敛速度快和计算复杂度低等优点.给出了算法的推导并用仿真数据对算法的有效性进行验证.     

用能量法求多自由度振动系统的角频率

利用简谐振动能量方程，通过分析振幅矢量的关系，用能量法求多自由度振动系统的角频率或简正振动频率。     

硬X射线磁圆二色实验方法的建立

在北京同步辐射装置(BSRF)1W1B光束线和XAFS实验站上国内首次建立了硬X射线波段的磁圆二色实验(XMCD)方法. 以单晶金刚石作为相位延迟片, 在透射劳埃(Laue)模式下, 利用衍射双折射效应, 将入射的单色线偏振光转变为相应的左旋和右旋圆偏振光, 测量磁化样品对左旋和右旋圆偏振光吸收的差异, 获得了XMCD信号. 本实验使用透射方法测量了Pt-Fe合金Pt L_2,3边的XMCD, 获得了XMCD信号. XMCD实验方法的建立, 为研究磁性材料尤其是磁性薄膜材料的电子结构和磁结构提供了实验基础.     

Two modifications of the least cost per period heuristic for dynamic lot-sizing

This paper proposes two constructive heuristics for the well-known single-level uncapacitated dynamic lot-sizing problem. The proposed heuristics, called net least period cost (nLPC) and nLPC(i), are developed by modifying the average period cost concept from Silver and Meal's heuristic, commonly known as least period cost (LPC). An improved tie-breaking stopping rule and a locally optimal decision rule are proposed in the second heuristic to enhance performance. We test the effectiveness of the proposed heuristics by using 20 benchmarking test problems frequently used in the literature. Furthermore, we perform a large-scale simulation study involving three factors, 50 experimental conditions, and 100?000 randomly generated problems to evaluate the proposed heuristics against LPC and six other well-known constructive heuristics in the literature. The simulation results show that both nLPC and nLPC(i) produce average holding and setup costs lower than or equal to those of LPC in every one of the 50 experimental conditions. The proposed heuristics also outperform each of the six other heuristics evaluated in all experimental conditions, without an increase in computational requirements. Lastly, considering that both nLPC and nLPC(i) are fairly simple for practitioners to understand and that lot-sizing heuristics have been commonly used in practice, there should be a very good chance for practical applications of the proposed heuristics.     

用自适应脉冲微扰引导混沌系统到周期解

用自适应脉冲微扰方法控制的系统的某个系统变量作为驱动,设计了一种自适应控制器方法对两个或多个响应混沌系统进行脉冲微扰,引导这些系统从混沌运动到低周期运动,实现同时控制多个混沌系统到不同的周期态. 当选择相同的自适应控制器输入变量实施脉冲微扰时,还可控制两个或多个混沌系统达到不同的周期态同步. 通过对R?ssler混沌系统的仿真研究证实了方法的有效性. 关键词： 混沌控制 系统参量 自适应控制器 脉冲微扰 周期态同步     

T-型树谱唯一性的一个简单刻画

图G称为谱唯一的,如果任何与G谱相同的图一定与G同构.一棵树称为T-型树如果其仅有一个最大度为3的顶点.本文给出了T-型树谱唯一性的一个简单刻画,从而完全解决了T-型树的谱唯一性问题.     

Spectral line suppression and sideband narrowing via quantum interference

We reveal that for a realistic system, interference effects are obtained such as the suppression of central line and inner sidebands and the narrowing of the outer fluorescence sidebands. For this purpose, we consider a spontaneous decay from an excited state to a metastable state when the excited and metastable states are resonantly coupled to an auxiliary metastable state by a laser field and a microwave field, respectively. The fluorescence spectrum evolves from a five-peaked structure into a doublet of ultrasharp lines as the ratio of the laser field Rabi frequency to the microwave Rabi frequency is decreased. The physical origin is presented in terms of dressed states.     

The application of a vehicle routing model to a waste-collection problem: two case studies

In this paper we suggest a unique model for estimating the operating cost of each of three waste-collection systems. Under the traditional system, which is widely used, waste is typically collected in plastic bags and a three-man crew is needed on each vehicle. The other two systems require a one-man crew for vehicle collecting street containers. The side-loader system with fixed body automatically empties street containers into the vehicle body and empties the load at the disposal site. The side-loader system with demountable body allows the separation of the waste collection phase from transport to the disposal site, since the vehicle body can be demounted. We also present two case studies and show how the estimation of operating costs is a critical issue in decisions regarding the type of system to be used for waste collection.