Blood lead monitoring in Italy: Assessment of the quality of results obtained between 1992 and 1994

Between 1992 and 1994, a new screening campaign for blood Pb monitoring in the Italian general population was carried out. Since the first campaign (started in 1978, in accomplishment of the European Community Directive 77/312/EEC) a working group of the Laboratory of Clinical Biochemistry at the Italian National Institute of Health (Istituto Superiore di Sanità), as the Reference Centre (RC), has coordinated the activity of various laboratories spread over the national territory. Appropriate quality assurance procedures, including an external quality assessment scheme (EQAS), were elaborated. Within the EQAS, three or four trials were carried out every year. Each laboratory participating in the trial analyzed eight control samples prepared from cow blood at different Pb concentrations. The results obtained by each peripheral laboratory and the RC between 1992 and 1994 have been compared by regression analysis. The same statistical method was adopted to compare the results obtained by each peripheral laboratory and the RC in the duplicate analysis of about 10 per cent of the human samples collected during the 1992–1994 monitoring campaign. There was no evidence of systematic differences between the regression lines obtained on control and human samples. In spite of the lower Pb concentration in the control samples analyzed during the 1992–1994 campaign, the analytical performance of the laboratories was better than that obtained in the previous screening campaign (1985–1986). Blood Pb levels observed in human samples collected between 1992 and 1994, confirm the downward time trend observed in the campaigns carried out in 1978–1979, 1980–1981 and 1985–1986. This study confirms that the results obtained in an EQAS are representative of the actual performance in the analysis of real (human) samples.     

Design of a calcium-binding protein with desired structure in a cell adhesion molecule

Ca2+, "a signal of life and death", controls numerous cellular processes through interactions with proteins. An effective approach to understanding the role of Ca2+ is the design of a Ca2+-binding protein with predicted structural and functional properties. To design de novo Ca2+-binding sites in proteins is challenging due to the high coordination numbers and the incorporation of charged ligand residues, in addition to Ca2+-induced conformational change. Here, we demonstrate the successful design of a Ca2+-binding site in the non-Ca2+-binding cell adhesion protein CD2. This designed protein, Ca.CD2, exhibits selectivity for Ca2+ versus other di- and monovalent cations. In addition, La3+ (Kd 5.0 microM) and Tb3+ (Kd 6.6 microM) bind to the designed protein somewhat more tightly than does Ca2+ (Kd 1.4 mM). More interestingly, Ca.CD2 retains the native ability to associate with the natural target molecule. The solution structure reveals that Ca.CD2 binds Ca2+ at the intended site with the designed arrangement, which validates our general strategy for designing de novo Ca2+-binding proteins. The structural information also provides a close view of structural determinants that are necessary for a functional protein to accommodate the metal-binding site. This first success in designing Ca2+-binding proteins with desired structural and functional properties opens a new avenue in unveiling key determinants to Ca2+ binding, the mechanism of Ca2+ signaling, and Ca2+-dependent cell adhesion, while avoiding the complexities of the global conformational changes and cooperativity in natural Ca2+-binding proteins. It also represents a major achievement toward designing functional proteins controlled by Ca2+ binding.     

Interactions of porphyrin covalently attached to poly(methacrylic acid) with liposomal membranes

The interactions between the 5-(4-acryloyloxyphenyl)-10,15,20-tritolylporphyrin covalently attached to poly(methacrylic acid) chain (PMA-Po) and phosphatidylcholine liposomes in aqueous solution at different pH values were studied. The binding constants (K(b)) for the liposome- PMA-Po in solutions in the pH range from 6.5 to 9.2 were determined using fluorescence spectroscopy. The binding was found to be efficient. The acid-base properties of the porphyrin chromophores were also studied. Both pK values associated with imine-N protonation of the porphyrin core were found to be 6.4. The quantum yield (Phi(Delta)) of singlet oxygen production by Po in the lipid-PMA-Po system was found to be high (0.88 +/- 0.05).     

Isomere Diamino-alkoxy-pyridin-carbonitrile — ihre Trennung und Verwendung als Kupplungskomponenten

The isomeric 4,6-diamino-2-alkoxy- (3), and 2,4-diamino-6-alkoxy-3-pyridine-carbonitriles (4) are obtained by treatment of 2-amino-1,1,3-tricyanopropene (1) with sodium alkoxides. Separation is based on their differentpK _a -values (3 a=2.01,4 a=4.17). Coupling reaction of3 a-c with benzenediazonium chloride in strong acidic medium leads to the yellow azo dyes5 a-c, whereas coupling of4 a requires a buffered solution (pH 4–6) to yield6. The UV-VIS spectra of the isomer pyridines and the azo dyes are discussed.     

Polycondensed nitrogen heterocycles. Part 19. Pyrrolo[1,2-f]phenanthridines by pschorr-type cyclization brought about by hypophosphorous acid

Pyrrolo[1,2-f]phenanthridines were prepared in good yields by the diazotization in acetic acid of the amines la,b and subsequent treatment with hypophosphorous acid. The necessity for hypophosphorous acid in the reaction was demonstrated.     

Reaction of nickel(II) xanthates with amines and carbon monoxide: Formation of thiourethanes and nickel tetracarbonyl

Summary Nickel(II) xanthates react with amines to form nickel(II) dithiocarbamates and thiourethanes, both products of nucleophilic substitution at the sp² carbon atom. If the reaction is conducted under carbon monoxide the nickel and sulphur-containing byproduct of thiourethane formation is transformed partly into Ni(CO)₄.     

Copper (II) complexes of sterically hindered o-diphenol derivatives: synthesis, characterization and microbiological studies

Cu (II) complexes with the sterically hindered diphenol derivatives 3,5-di(tert-butyl)-1,2-benzenediol (I), 4,6-di(tert-butyl)-1,2,3-benzenetriol (II) and the sulfur-containing 4,6-di(tert-butyl)-3-(2-hydroxyethylsulfanyl)-1,2-benzenediol (III) and 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfanyl]acetic acid (IV) have been synthesized and characterized by elemental analysis, TG/DTA, FT-IR, ESR, XPS, XPD and conductivity measurements. Compounds I–III can coordinate in their singly deprotonated forms and act as bidentate ligands. These compounds yield Cu (II) complexes of the stoichiometry Cu(L)₂, which have square planar geometry (g_| > g_⊥ > g_e). Unlike them, compound IV behaves as a terdentate ligand, and its complex Cu(L^IV)₂ has distorted octahedral geometry. According to ESR data, only the Cu(L^II)₂ complex contains a very small amount of phenoxyl radicals. Antimicrobial activities of these ligands and their respective Cu (II) complexes have been determined with respect to Gram-positive and Gram-negative bacteria, as well as on yeasts. Their phytotoxic properties against Chlorella vulgaris 157 were also examined.     

A molecular mechanics study of the effect of substitution in position 1 on the conformational space of the oxytocin/vasopressin ring

Summary The effect of the substitution in position 1 on the low-energy conformations of the oxytocin/vasopressin 20-membered ring was investigated by means of molecular mechanics. Three representative substitutions were considered: -mercapto-,-dimethyl)propionic acid (Dmp), (-mercapto-,-cyclopentamethylene)propionic acid (Cpp), both forming strong antagonists, and (,-dimethyl--mercapto)propionic acid (-Dmp), forming analogs of strongly reduced biological activity, with the -mercaptopropionic (Mpa) residue taken as reference. Both ECEPP/2 (rigid valence geometry) and AMBER (flexible valence geometry) force fields were employed in the calculations. Three basic types of backbone conformations were taken into account which are distinguished by the type of -turn at residues 3 and 4: 1/III, II, and I/III, all types containing one or two intra-annular hydrogen bonds. The allowed (ring-closed) disulfide-bridge conformations were searched by an algorithm formulated in terms of scanning the disulfide-bridge torsional angle C-S-S-C. The ECEPP/2 and AMBER energies of the obtained conformations were found to be in reasonable agreement. Two of the low-energy conformers of the [Mpa¹]-compound agreed very well with the cyclic part of the two conformers found in the crystal structure of [Mpa¹]-oxytocin. An analysis of the effect of -substitution on relative energies showed that the conformations with the N-C-CH₂-CH₂ (₁) and C-CH₂-CH₂-S (₁) angles of the first residue around (–100°, 60°) and (100°, –60°) are not affected; this in most cases implies a left-handed disulfide bridge. In the case of -substitution the allowed values of ₁ are close to ± 60°. This requirement, being in contradiction to the one concerning -substitution, could explain the very low biological activity of the -substituted analogs. The conformational preferences of substituted compounds can largely be explained by the analysis of local interactions within the first residue. Based on the selection of the conformations which are low in energy for both the reference and -substituted compounds, two distinct types of possible binding conformations were proposed, the first one being similar to the crystal conformer with a left-handed disulfide bridge, the second one having a right-handed bridge, but a geometry different from that of the crystal conformer with the right-handed bridge. The first type of disulfide-bridge arrangement is equally favorable for both I/III and II types of backbone structure, while the second one is allowed only for the II type of backbone. No conformation of the I/III type has a low enough energy to be considered as a possible binding conformation for all of the active compounds studied in this work.     

Use of U-shaped donor-bridge-acceptor molecules to study electron tunneling through nonbonded contacts

A systematic determination of electronic coupling matrix elements in U-shaped molecules is demonstrated. The unique architecture of these systems allows for the determination of the electronic coupling through a pendant molecular moiety that resides between the donor and acceptor groups; this moiety quantifies the efficiency of electron tunneling through nonbonded contacts. Experimental electron-transfer rate constants and reaction free energies are used to calibrate a molecular-based model that describes the solvation energy. This approach makes it possible to experimentally determine electronic couplings and compare them with computational values.     

Stereoselective hydroxylation of an achiral cyclopentanecarboxylic acid derivative using engineered P450s BM-3

Substrate engineered, achiral carboxylic acid derivative was biohydroxylated with various mutants of cytochrome P450 BM-3 to give two out of the four possible diastereoisomers in high de and ee. The BM-3 mutants exhibit up to 9200 total turnovers for hydroxylation of the engineered substrate, which without the protecting group is not transformed by this enzyme.