Paper sheet moisture measurements in the far infrared

Measurement of several parameters pertinent to process and quality control in the manufacture of paper products is a potentially important application of far-infrared lasers. Preliminary measurements of the transmittance and reflectance of moist paper sheets are presented, and their use to determine the percentage moisture content and the dry basis weight of the paper is discussed.     

Studying surfaces and thin films using Mössbauer spectroscopy

Using a series of bi-layer samples, we show how Conversion Electron Mössbauer Spectroscopy (CEMS) and X-ray Backscatter Mössbauer Spectroscopy (XBS) can be done with the same experimental set up. The penetration depths of the K and L conversion electrons are measured as 51(6) and 330(240) nm, respectively, with relative contributions of 88(9) and 12(9)%. The penetration depth of the Fe-K _α X-ray signal is determined to be 3.6(2) μm. As a demonstration we show data on surface damage effects in electropolished TRIP steels, and by comparing CEMS and XBS Mössbauer patterns we estimate the thickness of a damaged layer (created by sanding) to be 550(50) nm.     

Cosensitization by 9,10-dicyanoanthracene and biphenyl of the electron-transfer photooxygenation of 1,1,2,2-tetraphenylcyclopropane

Electron-transfer photooxygenation of 1,1,2,2-tetraphenylcyclopropane with 9,10-dicyanoanthracene in oxygen-saturated acetonitrile yields 1,1,3,3-tetraphenyl-2-propen-1-o1 after reduction of the intermediate hydroperoxide. The rate of reaction is significantly increased by the addition of biphenyl as a cosensitizer.     

Direct evidence for neutrino flavor transformation from neutral-current interactions in the Sudbury Neutrino Observatory

Observations of neutral-current nu interactions on deuterium in the Sudbury Neutrino Observatory are reported. Using the neutral current (NC), elastic scattering, and charged current reactions and assuming the standard 8B shape, the nu(e) component of the 8B solar flux is phis(e) = 1.76(+0.05)(-0.05)(stat)(+0.09)(-0.09)(syst) x 10(6) cm(-2) s(-1) for a kinetic energy threshold of 5 MeV. The non-nu(e) component is phi(mu)(tau) = 3.41(+0.45)(-0.45)(stat)(+0.48)(-0.45)(syst) x 10(6) cm(-2) s(-1), 5.3sigma greater than zero, providing strong evidence for solar nu(e) flavor transformation. The total flux measured with the NC reaction is phi(NC) = 5.09(+0.44)(-0.43)(stat)(+0.46)(-0.43)(syst) x 10(6) cm(-2) s(-1), consistent with solar models.     

Valence‐to‐Core X‐ray Emission Spectroscopy as a Probe of O−O Bond Activation in Cu2O2 Complexes

Valence‐to‐Core (VtC) X‐ray emission spectroscopy (XES) was used to directly detect the presence of an O?O bond in a complex comprising the [Cu^II₂(μ‐η²:η²‐O₂)]²⁺ core relative to its isomer with a cleaved O?O bond having a [Cu^III₂(μ‐O)₂]²⁺ unit. The experimental studies are complemented by DFT calculations, which show that the unique VtC XES feature of the [Cu^II₂(μ‐η²:η²‐O₂)]²⁺ core corresponds to the copper stabilized in‐plane 2p π peroxo molecular orbital. These calculations illustrate the sensitivity of VtC XES for probing the extent of O?O bond activation in μ‐η²:η²‐O₂ species and highlight the potential of this method for time‐resolved studies of reaction mechanisms.     

The direct evaluation of attosecond chirp from a streaking measurement

We derive an analytical expression that relates the breadth of a streaked photoelectron spectrum to the group-delay dispersion of an isolated attosecond pulse. Based on this analytical expression, we introduce a simple, efficient and robust procedure to instantly extract the attosecond pulse’s chirp from the streaking measurement. We show that our method is robust against experimental artifacts.     

Cored anion-exchange chromatography media for antibody flow-through purification

Agarose-based anion-exchangers (e.g. quaternary amine, Q) have been widely used in monoclonal antibody flow-through purification to remove trace levels of impurities. Such media are often packed in a large column and the operation is usually robust but with limited throughput due to the compressibility of agarose and consequentially low bed permeability. In order to address this limitation, cored Q beads consisting of a rigid core and a thin agarose gel coating were developed and evaluated for protein flow-through chromatography. Using laboratory-scale columns it was found that, the cored beads indeed provide significantly enhanced rigidity and flow permeability relative to conventional homogeneous agarose resins. Depending on the structure and size of the cored beads, the permeability was 2-4-fold higher than that of a commonly used commercial agarose resin. Good virus and host cell protein clearance was achieved with the cored Q beads even at increased flow velocities. In addition, the impermeable core allows for more efficient use of buffers without loss of useful capacity in polishing applications. Process analyses based upon the experimental data demonstrated that the enhanced permeability achieved with the cored beads can significantly improve process throughput and economics.     

Structure investigation of poly(p-phenylene vinylene)

Electron diffraction patterns of highly oriented poly(p-phenylene vinylene) films obtained by the soluble polymeric precursor route are interpreted on the basis of a monoclinic unit cell containing two monomer units: c (chain axis) = 0.658 nm, a = 0.790 nm, b = 0.605 nm, α ? 123°. The molecules are nearly perfectly oriented along the stretching direction but exhibit partial axial translational disorder.