Synthesis of a Naphthalimide Functionalized Calix[4]arene; A Host Type Fluorophore for Inclusion Compounds in Organic Medium

This article reports the synthesis and the properties of 5,11,17,23-tetra(t-butyl)-25,27-bis-(ethoxy-1,8-naphthalimide)-26,28-hidroxy-calix[4]arene and the formation of an inclusion compound in organic medium. This functionalized calix[4]arene was conceived as the association of a potential host species with a good fluorophore for optical sensoring purposes. Calix[4]-NI as we will call it, maintains its ‘cone-pinched’ configuration and exhibits typical naphthalimide fluorescence bands in non-polar solvents. Its ability to interact with guest species via hydrogen bonding in its endo-hydrophilic cavity to form inclusion compounds was verified with absorption and fluorescence measurements using N-ethanol-1,8-naphthalimide as guest species, which was projected to fit exactly the host cavity and to interact with its naphthalimide π electrons. For this reason, it was possible to follow the formation of the inclusion compound with electronic spectroscopy.     

Organic nanoparticles whose size and rigidity are finely tuned by cross-linking the end groups of dendrimers

Dendrimers with molecular weights ranging from ca. 2700 to 11 000 and from 16 to 64 homoallyl ether end groups were cross-linked using the Grubbs ring-closing metathesis reaction. A combination of SEC, MALDI-TOF-MS, and AFM were used to characterize the cross-linked nanoparticles. The data suggest a significant decrease in volume with cross-linking and a concomitant increase in rigidity, both of which can be controlled independently with a fair degree of precision.     

Zur Kenntnis des Phosphatstoffwechsels der Hefe

Scheinbare Divergenzen zwischen den seinerzeit aufgestellten Phosphatbilanzen in Säureextrakten aus phosphatangereicherter und-verarmter Hefe und den in der letzten Mitteilung dieser Reihe erhobenen Befunden über den Gehalt an freien Nucleotiden in demselben Material, veranlaßten eine genauere Überprüfung der Frage, inwieweit die Extraktionsmethoden die Ergebnisse der Nucleotidbestimmung und der Phosphatbilanzen beeinflussen. Es zeigte sich, daß bei Bestimmung der freien Nucleotide, trotz Verwendung verschiedener Extraktionsmittel, sowohl qualitativ als auch quantitativ weitgehend entsprechende Ergebnisse erhalten wurden.Die Resultate können wieder in dem Sinne erklärt werden, daß während der Phosphatanreicherung eine Synthese von Nucleinsäure auf Kosten der freien Nucleotide erfolgt.Gleichzeitig durchgeführte Phosphatbilanzen in den Säureextrakten aus phosphat-verarmter und-angereicherter Hefe ergaben je nach den Extraktionsbedingungen starke, zur Zeit noch schwer deutbare Konzentrationsunterschiede in den einzelnen Phosphatfraktionen.

---

---

Mit 2 Abbildungen     

The mass spectra of [17-13C]phyllocladene and [3-13C]methylenecholestane—III

The mass spectra of [17-¹³C]phyllocladene and [3-¹³C]methylenecholestane have been examined. It is shown that there are some rearrangements at 70 e V as in the case of [17-¹³C]kaurene. However, no extensive randomization is evident at the molecular ion level. The results are interesting because very little is known about ¹³C randomization in polycyclic aliphatic hydrocarbons. The percentage retention of label was calculated for each ion.     

ICP-MS determination of heavy metals in submerged cultures of wood-rotting fungi

Accumulation of five heavy metal ions by five species of wood-rotting basidiomycetes during a 9-day cultivation was studied. Contents of Cd, Cu, Pb, and Zn were measured using ICP-MS; the amount of mercury was determined directly in solid samples using the Advanced Mercury Analyser. A standard operation procedure for the sample preparation and determination of metal content was developed and validated. Presence of Cd, Cu, Hg, and Pb decreased the accumulation of zinc by the fungi. The basidiomycete Pycnoporus cinnabarinus exhibited the highest metal binding capacity of all fungi tested.     

Interfacial properties of pulmonary surfactant layers

The composition of the pulmonary surfactant and the border conditions of normal human breathing are relevant to characterize the interfacial behavior of pulmonary layers. Based on experimental data methods are reviewed to investigate interfacial properties of artificial pulmonary layers and to explain the behavior and interfacial structures of the main components during compression and expansion of the layers observed by epifluorescence and scanning force microscopy. Terms like over-compression, collapse, and formation of the surfactant reservoir are discussed. Consequences for the viscoelastic surface rheological behavior of such layers are elucidated by surface pressure relaxation and harmonic oscillation experiments. Based on a generalized Volmer isotherm the interfacial phase transition is discussed for the hydrophobic surfactant proteins, SP-B and SP-C, as well as for the mixtures of dipalmitoylphosphatidylcholine (DPPC) with these proteins. The behavior of the layers depends on both the oligomerisation state and the secondary structure of the hydrophobic surfactant proteins, which are controlled by the preparation of the proteins. An example for the surface properties of bronchoalveolar porcine lung washings of uninjured, injured, and Curosurf treated lavage is discussed in the light of surface behavior. An outlook summarizes the present knowledge and the main future development in this field of surface science.     

Electrokinetic molecular separation in nanoscale fluidic channels

This report presents a study of electrokinetic transport in a series of integrated macro- to nano-fluidic chips that allow for controlled injection of molecular mixtures into high-density arrays of nanochannels. The high-aspect-ratio nanochannels were fabricated on a Si wafer using interferometric lithography and standard semiconductor industry processes, and are capped with a transparent Pyrex cover slip to allow for experimental observations. Confocal laser scanning microscopy was used to examine the electrokinetic transport of a negatively charged dye (Alexa 488) and a neutral dye (rhodamine B) within nanochannels that varied in width from 35 to 200 nm with electric field strengths equal to or below 2000 V m-1. In the negatively charged channels, nanoconfinement and interactions between the respective solutes and channel walls give rise to higher electroosmotic velocities for the negatively charged dye than for the neutral dye, towards the negative electrode, resulting in an anomalous separation that occurs over a relatively short distance (<1 mm). Increasing the channel widths leads to a switch in the electroosmotic transport behavior observed in microscale channels, where neutral molecules move faster because the negatively charged molecules are slowed by the electrophoretic drag. Thus a clear distinction between "nano-" and "microfluidic" regimes is established. We present an analytical model that accounts for the electrokinetic transport and adsorption (of the neutral dye) at the channel walls, and is in good agreement with the experimental data. The observed effects have potential for use in new nano-separation technologies.     

Synthesis of some dibenzodiazepinone derivatives as potent and m2-selective antimuscarinic compounds

Two series of 5-[[4-[4-(dialkylamino)butyl]-l-cyclohexyl]acetyl], and 5-[(dialkylamino)acyl]-10,11-dihydro-5H- dibenzo[b,e][1,4]diazepin-11-ones were synthesized as potential m2-selective ligands 1,2. Their affinity and selectivity for the muscarinic cholinergic receptor m-AChR subtypes were determined. Replacing a nitrogen with CH in the piperidine ring of 5-[[4-[4-(dialkylamino)butyl]-l-piperidinyl]acetyl]-10,11-dihydro-5H-dibenzo-[b,e][1,4]diazepin-11-ones 3 significantly altered the affinity and selectivity to the muscarinic receptor subtypes.     

Reversible protein adsorption and bioadhesion on monolayers terminated with mixtures of oligo(ethylene glycol) and methyl groups

Surface-grafted, environmentally responsive polymers have shown great promise for controlling adsorption and desorption of macromolecules and cells on solid surfaces. In the paper, we demonstrate that certain mixed self-assembled monolayers (SAMs) of oligo(ethylene glycol) (OEG) and methyl-terminated alkanethiolates on gold form surfaces with switchable hydrophobicity and tendency for protein adsorption and cellular attachment. At temperatures above 32 degrees C, SAMs with a surface density of approximately 50% OEG adsorbed significant amounts of pyruvate kinase and lysozyme, whereas below this temperature, these same SAMs were resistant to the adsorption of these proteins. Furthermore, protein layers adsorbed to these SAMs above 32 degrees C were removed upon rinsing with water below this temperature. Similar results were seen for attachment and release of the marine bacterium, Cobetia marina. The change from nonresistance to adsorptive state of the SAMs was concomitant with a change in advancing water contact angle. Vibrational sum frequency generation spectroscopy suggests that the temperature-induced changes coincide with a disorder-to-partial order transition of the hydrated methylene chains of the OEG moieties within the SAMs. Mixed OEG-methyl SAMs represent both a convenient means of controlling macromolecular and cellular adsorption within the laboratory and a useful tool for relating adsorption properties to molecular structures within the SAMs.     

Biosensor based on paraffin/graphite modified with sweet potato tissue for the determination of hydroquinone in cosmetic cream in organic phase

An organic-phase biosensor based on paraffin/graphite modified with sweet potato (Ipomoea batatas (L.) Lam.) tissue as the source of peroxidase was developed and used for determining hydroquinone in cosmetic creams. This enzyme in the presence of hydrogen peroxide catalyses the oxidation of hydroquinone to p-quinone which electrochemical reduction back to hydroquinone was obtained at a peak potential of -0.22 V. The recovery of hydroquinone from two samples ranged from 99.1 to 104.1% and a rectilinear analytical curve for hydroquinone concentration from 7.5x10(-5) to 1.6x10(-3) M (r=0.9991) were obtained. The detection limit was 8.1x10(-6) M and relative standard deviation was <1.0% for a solution containing 7.3x10(-4) M hydroquinone and 1.0x10(-3) M hydrogen peroxide in 0.10 M tetrabutylammonium bromide methanol-phosphate buffer solution (95:5% v/v) (n=10). The results obtained for hydroquinone in cosmetic creams using the proposed biosensor are in close agreement with those obtained using a Pharmacopoeia procedure at the 95% confidence level.