Thermodynamic and NMR study of aggregation of dodecyltrimethylammonium chloride in aqueous sodium salicylate solution

The complex aggregation processes of dodecyltrimethylammonium chloride (DTAC) have been studied in dilute solutions of sodium salicylate (NaSal) by isothermal titration calorimetry and electrical conductivity at temperatures between 278.15 K and 318.15 K. A structural transformation that was dependent on the concentrations of DTAC and NaSal was observed. The micellization process in dilute solutions of DTAC has been subjected to a detailed thermodynamic analysis and shown to occur at considerably lower critical micelle concentrations than reported for DTAC in water and NaCl solutions. Gibbs free energy, Δ _mic G ^o, and entropy, Δ _mic S ^o, were deduced by taking into account the degree of micelle ionization, β, estimated from conductivity measurements. From the temperature dependence of the enthalpy of micellization, Δ _mic H ^o, the heat capacities of micellization, D_mic c_p^o {\Delta_{{{\rm mic} }}}c_p^o were determined and discussed in terms of the removal of large areas of non-polar surface from contact with water upon micellization. The process is exothermic at all temperatures, indicating, in addition to the hydrophobic effect, the presence of strong interactions between surfactant and salicylate ions. These were confirmed by ¹H NMR spectroscopy and diffusion NMR experiments. Salicylate ions not only interact with the headgroups but also insert further into the micelle core. At c _NaSal/c _DTAC > 2.5, the structural rearrangements occur even at relatively low concentrations of NaSal.     

Selectivity among two lectins: probing the effect of topology, multivalency and flexibility of "clicked" multivalent glycoclusters

The design of multivalent glycoconjugates has been developed over the past decades to obtain high-affinity ligands for lectin receptors. While multivalency frequently increases the affinity of a ligand for its lectin through the so-called "glycoside cluster effect", the binding profiles towards different lectins have been much less investigated. We have designed a series of multivalent galactosylated glycoconjugates and studied their binding properties towards two lectins, from plant and bacterial origins, to determine their potential selectivity. The synthesis was achieved through copper(I)-catalysed azide-alkyne cycloaddition (CuAAC) under microwave activation between propargylated multivalent scaffolds and an azido-functionalised carbohydrate derivative. The interactions of two galactose-binding lectins from Pseudomonas aeruginosa (PA-IL) and Erythrina cristagalli (ECA) with the synthesized glycoclusters were studied by hemagglutination inhibition assays (HIA), surface plasmon resonance (SPR) and isothermal titration microcalorimetry (ITC). The results obtained illustrate the influence of the scaffold's geometry on the affinity towards the lectin and also on the relative potency in comparison with a monovalent galactoside reference probe.     

Ferromagnetic versus antiferromagnetic exchange interactions in tetrathiafulvalene-based 3d/4f heterobimetallic complexes

(TTF-salphen)M compounds (TTF-salphen(2-)=4,5-bis(propylthio)tetrathiafulvalene-N,N'-phenylenebis(salicylideneimine) dianion; M=Cu(II) and Ni(II)) have been treated with Ln(hfac)(3)·2H(2)O precursors (hfac(-)=1,1,1,5,5,5-hexafluoroacetylacetonate anion; Ln=Gd(III), Tb(III), and Dy(III)) to elaborate unprecedented 3d/4f TTF-based heterobimetallic complexes of formula [(TTF-salphen)MLn(hfac)(3)]. All the structures of these compounds have been resolved by X-ray diffraction on single crystals. The structures of these complexes are formed by a TTF-salphen(2-) ligand coordinated to the 3d metal ions in the inert tetradentate N(2)O(2) site. The Ln(hfac)(3) fragment is coordinated to the (TTF-salphen)M one through the two phenolate bridges. Even if the complexes are similar in both Cu(II) and Ni(II) families, the crystal packing is different. In the first case, dimers of TTF-salphen(2-) donors constitute the organic network. In the other case, a reminiscent organic network is observed with S···S contacts. The photophysical properties of [(TTF-salphen)CuDy(hfac)(3)] (3) in chloroform solution highlight the redshift of the TTF→salphen charge transfer (400 cm(-1)) relative to the analogue excitations in (TTF-salphen)Cu, which attest to the stability of these structures in solution. Static magnetic measurements have allowed us to quantify the ferromagnetic interactions (J=+1.29 cm(-1)) between Cu(II) and Gd(III) in the [(TTF-salphen)CuGd(hfac)(3)] complex. Finally, an empirical method that consists of the comparisons of the magnetic properties of [(TTF-salphen)CuTb(hfac)(3)] with [(TTF-salphen)NiTb(hfac)(3)] and [(TTF-salphen)CuDy(hfac)(3)] with [(TTF-salphen)NiDy(hfac)(3)] has established that ferromagnetic interactions take place between Cu(II) and Tb(III) ions, whereas unusual antiferromagnetic interactions have been identified between Cu(II) and Dy(III) ions.     

Liquid-phase epitaxy of multicomponent layer-based porous coordination polymer thin films of [M(L)(P)0.5] type: importance of deposition sequence on the oriented growth

The progressive liquid-phase layer-by-layer (LbL) growth of anisotropic multicomponent layer-based porous coordination polymers (PCPs) of the general formula [M(L)(P)(0.5)] (M: Cu(2+), Zn(2+); L: dicarboxylate linker; P: dinitrogen pillar ligand) was investigated by using either pyridyl- or carboxyl-terminated self-assembled monolayers (SAMs) on gold substrates as templates. It was found that the deposition of smooth, highly crystalline, and oriented multilayer films of these PCPs depends on the conditions at the early growth cycles. In the case of a two-step process with an equimolar mixture of L and P, growth along the [001] direction is strongly preferred. However, employing a three-step scheme with full separation of all components allows deposition along the [100] direction on carboxyl-terminated SAMs. Interestingly, the growth of additional layers on top of previously grown oriented seeding layers proved to be insensitive to the particular growth scheme and full retention of the initial orientation, either along the [001] or [100] direction, was observed. This homo- and heteroepitaxial LbL growth allows full control over the orientation and the layer sequence, including introduction of functionalized linkers and pillars.     

Performance evaluation on a wide set of matrix-assisted laser desorption ionization matrices for the detection of oligosaccharides in a high-throughput mass spectrometric screening of carbohydrate depolymerizing enzymes

Compared to other analytical methods, matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) presents several unique advantages for the structural characterization of degradation products of carbohydrates. Our final goal is to implement this technique as a high-throughput platform, with the aim of exploring natural bio-diversity to discover new carbohydrate depolymerizing enzymes. In this approach, a variety of carbohydrates will be used as enzymes substrates and MALDI-MS will be employed to monitor the oligosaccharides produced. One drawback of MALDI, however, is that the choice of the matrix is largely dependent on the chemical properties of the analyte. In this context, our objective in the present work was to find the smallest set of MALDI matrices able to detect chemically heterogeneous oligosaccharides. This was done through the performance evaluation of more than 40 MALDI matrices preparations. Homogeneity of analyte-matrix deposits was considered as a critical feature, especially since the final objective is to fully automate the analyses. Evaluation of the matrices was done by means of a rigorous statistical approach. Amongst all tested compounds, our work proposes the use of the DHB/DMA ionic matrix as the most generic matrix, for rapid detection of a variety of polysaccharides including neutral, anionic, methylated, sulfated, and acetylated compounds. The selected matrices were then used to screen crude bacterial incubation media for the detection of enzymatic degradation products.     

Selective adsorption of proteins on single-wall carbon nanotubes by using a protective surfactant

The dispersion of highly hydrophobic carbon materials such as carbon nanotubes in biological media is a challenging issue. Indeed, the nonspecific adsorption of proteins occurs readily when the nanotubes are introduced in biological media; therefore, a methodology to control adsorption is in high demand. To address this issue, we developed a bifunctional linker derived from pyrene that selectively enables or prevents the adsorption of proteins on single-wall carbon nanotubes (SWNTs). We demonstrated that it is possible to decrease or completely suppress the adsorption of proteins on the nanotube sidewall by using proper functionalization (either covalent or noncovalent). By subsequently activating the functional groups on the nanotube derivatives, protein adsorption can be recovered and, therefore, controlled. Our approach is simple, straightforward, and potentially suitable for other biomolecules that contain thio or amino groups available for coupling.     

Observation and mechanistic study of facile C-O bond formation between a well-defined aryl-copper(III) complex and oxygen nucleophiles

A well-defined macrocyclic aryl–Cu(III) complex (2) reacts readily with a variety of oxygen nucleophiles, including carboxylic acids, phenols and alcohols, under mild conditions to form the corresponding aryl esters, biaryl ethers and alkyl aryl ethers. The relationship between these reactions and catalytic C-O coupling methods is demonstrated by the reaction of the macrocyclic aryl–Br species with acetic acid and p-fluorophenol in the presence of 10 mol% Cu(I). An aryl-Cu(III)-Br species 2(Br) was observed as an intermediate in the catalytic reaction. Investigation of the stoichiometric C-O bond-forming reactions revealed nucleophile-dependent changes in the mechanism. The reaction of 2 with carboxylic acids revealed a positive correlation between the log(k(obs)) and the pK(a) of the nucleophile (less-acidic nucleophiles react more rapidly), whereas a negative correlation was observed with most phenols (more-acidic phenols react more rapidly). The latter trend resembles previous observations with nitrogen nucleophiles. With carboxylic acids and acidic phenols, UV-visible spectroscopic data support the formation of a ground-state adduct between 2 and the oxygen nucleophile. Collectively, kinetic and spectroscopic data support a unified mechanism for aryl-O coupling from the Cu(III) complex, consisting of nucleophile coordination to the Cu(III) center, deprotonation of the coordinated nucleophile, and C-O (or C-N) reductive elimination from Cu(III).     

Violet-to-blue tunable emission of aryl-substituted dispirofluorene-indenofluorene isomers by conformationally-controllable intramolecular excimer formation

Two series of DiSpiroFluorene-IndenoFluorene (DSF-IF) positional isomers, namely dispiro[2,7-diarylfluorene-9',6,9',12-indeno[1,2-b]fluorenes], (1,2-b)-DSF-IFs 1 and dispiro[2,7-diarylfluorene-9',6,9',12-indeno[2,1-a]fluorenes], (2,1-a)-DSF-IFs 2 have been synthesized. These violet-to-blue fluorescent emitters possess a 3π-2spiro architecture, which combines via two spiro links two different indenofluorene cores, that is, (1,2-b)-IF or (2,1-a)-IF and 2,7-substituted-diaryl-fluorene units. Due to their different geometric profiles, the two families of positional isomers present drastically different properties. The marked difference observed between the properties of (1,2-b)-DSF-IF (1) and (2,1-a)-DSF-IF (2) is discussed in terms of intramolecular π-π interactions occurring in (2,1-a)-DSF-IF (2) leading to conformationally-controllable intramolecular excimer formation. Indeed, the original geometry of the (2,1-a)-DSF-IF (2) family, with face-to-face "aryl-fluorene-aryl" moieties, leads to remarkable excimer emission through intramolecular π-π interactions in the excited state. Furthermore, the emission wavelengths can be gradually modulated by the control of the steric hindrance between the adjacent substituted phenyl rings. Thus, through a comparative and detailed study of the (1)H NMR, electrochemical and photophysical properties of DSF-IFs 1 and 2, we have evidenced the intramolecular π-π interactions occurring between the two "aryl-fluorene-aryl" moieties in the ground state and in the excited state. These properties have been finally correlated to the spectacular conformational change modeled by density functional theory (DFT) calculations. Indeed, the two "aryl-fluorene-aryl" moieties switch from a staggered conformation in the ground state to an eclipsed conformation in the first excited state.