Ozone production in oxygen by means of F2-laser irradiation at λ=157.6 nm

Ozone is generated in pure oxygen (p5 kPa), synthetic air (p7 kPa) and oxygen-argon mixtures (p3 kPa) by irradiation of these gases with the VUV light of a repetitively pulsed (f _L15 Hz) F₂-laser at =157.6 nm with maximum about 4 mJ/pulse. An absorption photometer measurement operating at 253.7 nm (Hg line) determines the ozone concentration as a function of oxygen and/or additive gas pressure, the repetition frequency of the laser and the wall temperature of the reaction chamber. The temporal development of the ozone concentration as a function of these parameters is calculated by means of rate equations for the species O(³ P), O₂(X ³ _g ^– ), O₃(¹ A ₁), O(¹ D), O₂(a ¹_g), O₂(b ¹ _g ⁺ ) and vibrationally excited O ₃ ^* (¹ A ₁) and the photon distribution. The maximum concentration of O₃ in the sealed-off chamber reaches 1.6% in pure O₂, 4.1% in air and 1.2% in a 1:5 O₂-Ar mixture at 3 kPa. The annihilation of O₃ by the wall and temperature dependent volume processes (300 KT395 K) is studied and the experimental and theoretical results are compared.     

Maskierung mit Kaliumjodid bei direkten Titrationen von Kupfer(II) mit Äthylendiamintetraessigsäure

Zusammenfassung Die Jodidoxydation durch Cu(II) wird in Anwesenheit von Ammoniak, Natriumtartrat, citrat oder -oxalat infolge Komplexbildung verhindert. Daher kann man z. B. Quecksüber(II) in Anwesenheit der genannten Komplexbildner mit Kaliumjodid maskieren und Kupfer(II) durch direkte Titration mit ÄDTA gegen Murexid, Brenzcatechinviolett, Chromazurol S, PAN oder PAR als Indikator bestimmen.

---

Masking with potassium iodide in direct titrations of copper(II) with ethylenediamine tetraacetic acid

Summary The formation of a complex prevents the iodide oxidation by Cu(II) in the presence of ammonia, sodium tartrate, citrate, or oxalate. Hence mercury(II) for instance, can be masked against potassium iodide in the presence of these complex formers, and Cu(II) can be determined by direct titration with EDTA in the presence of murexide, pyrocatechol violet, chromazurol, PAN or PAR as indicator.

     

Photophysical properties of borondipyrromethene analogues in solution

The photophysical properties of seven new 8-(p-substituted)phenyl analogues of 4,4-difluoro-3,5-dimethyl-8-(aryl)-4-bora-3a,4a-diaza-s-indacene (derivatives of the well-known fluorophore BODIPY) in several solvents have been studied by means of absorption and steady-state and time-resolved fluorimetry. For each compound, the fluorescence quantum yield and lifetime are lower in solvents with higher polarity owing to an increase in the rate of nonradiative deactivation. Increasing the electron withdrawing strength of the p-substituent on the phenyl group in position 8 also leads to lower fluorescence quantum yields and lifetimes. When the p-substituent on the phenyl group in position 8 is a tertiary amine [8-(4-piperidinophenyl), 8-(4-N,N-dimethylaminophenyl), and 8-(4-morpholinophenyl)], the low quantum yields of these compounds in more polar solvents can be rationalized by the inversion of the energy levels of an apolar, highly fluorescent and a polar, nonfluorescent excited state, where charge transfer from the tertiary amine to the BODIPY unit occurs. These amine analogues can be protonated at low pH in aqueous solution. Fluorescence titrations yielded pK(a) values of their conjugate ammonium salts which are in agreement with the electron donating tendency of the amine group: piperidino (4.15) > dimethylamino (2.37) > morpholino (1.47), with the pK(a) values in parentheses. The rate constant of radiative deactivation (k(f)) is the same for all compounds in all solvents studied (k(f) = 1.4 x 10(8) s(-1)).     

Z/E-photoisomerizations of olefins with 4npi- or (4n + 2)pi-electron substituents: zigzag variations in olefin properties along the T(1) state energy surfaces

[Figure: see text]. A quantum chemical study has been performed to assess changes in aromaticity along the T1 state Z/E-isomerization pathways of annulenyl-substituted olefins. It is argued that the point on the T1 energy surface with highest substituent aromaticity corresponds to the minimum. According to Baird (J. Am. Chem. Soc. 1972, 94, 4941), aromaticity and antiaromaticity are interchanged when going from S0 to T1. Thus, olefins with S0 aromatic substituents (set A olefins) will be partially antiaromatic in T1 and vice versa for olefins with S0 antiaromatic substituents (set B olefins). Twist of the C=C bond to a structure with a perpendicular orientation of the 2p(C) orbitals (3p*) in T1 should lead to regaining substituent aromaticity in set A and loss of aromaticity in set B olefins. This hypothesis is verified through quantum chemical calculations of T1 energies, geometries (bond lengths and harmonic oscillator measure of aromaticity), spin densities, and nucleus independent chemical shifts whose differences along the T1 PES display zigzag dependencies on the number of -electrons in the annulenyl substituent of the olefin. Aromaticity changes are reflected in the profiles of the T1 potential energy surfaces (T1 PESs) for Z/E-isomerizations because olefins in set A have minima at 3p* whereas those in set B have maxima at such structures. The proper combination (fusion) of the substituents of set A and B olefins could allow for design of novel optical switch compounds that isomerize adiabatically with high isomerization quantum yields.     

Lamellar Organo-Bridged Silicones

The acid-hydrolysis of an organo-bridged bisdiethoxysilylated molecular precursor bearing urea groups, (EtO)₂MeSi(CH₂)₃NHCONH(CH₂)₁₂NHCONH(CH₂)₃SiMe(OEt)₂, has been performed in pure aqueous medium. Scanning electron microscopy (SEM) analysis of the resulting insoluble solid revealed plate-like forms with a lamellar structure as determined by powder X-ray diffraction (PXRD) studies with a sharp peak at 28.5 Å. The solid state ²⁹Si MAS-NMR spectrum of this bridged siloxane hybrid is consistent with a moderately condensed material with complete preservation of the Si–C bonds throughout the hybrid network. In comparison, the classical sol–gel hydrolysis-condensation of the molecular precursor in ethanol with stoichiometric amount of water and fluoride anion as catalyst produced an amorphous featureless solid.     

Gas-phase ion/molecule reactions between dimethoxyphosphonium ions and aromatic hydrocarbons

Ion/molecule reactions between O=P(OCH(3))(2)(+) phosphonium ions and six aromatic hydrocarbons (benzene, toluene, 1,2,4-trimethylbenzene, naphthalene, acenaphthylene and fluorene) were performed in a quadrupole ion trap mass spectrometer. The O=P(OCH(3))(2)(+) phosphonium ions, formed by electron impact from neutral trimethyl phosphite, were found to react with aromatic hydrocarbons (ArHs) to give (i) an adduct [ArH, O=P(OCH(3))(2)](+) and (ii) for ArHs which have an ionization energy below or equal to 8.14 eV, a radical cation ArH(+ *) by charge transfer reaction. Collision-induced dissociation experiments, which produce fragment ions other than the O=P(OCH(3))(2)(+) ions, indicate that the adduct ions are covalent species. Isotope-labeled ArHs were used to elucidate fragmentation mechanisms. The charge transfer reactions were investigated using density functional theory at the B3LYP/6-311 + G(3df,2p)//B3LYP/6-31G(d,p) level of theory. The potential energy surface obtained from B3LYP/6-31G(d,p) calculations for the reaction between O=P(OCH(3))(2)(+) and benzene is described.     

Untersuchung der thermischen Eigenschaften von Alkalibenzolsulfonaten

Zusammenfassung Der Einfluß von Atmosphäre, Aufheizungsgeschwindigkeit und Spülgasgeschwindigkeit auf die thermische Zersetzung von Alkalibenzolsulfonaten wurde untersucht. Kristallwassergehalt, Dehydratations-temperatur und -wärme, gegebenenfalls die Zusammensetzung, Art, Temperatur und Wärme der Modifikationsänderungen, Schmelzpunkte und Schmelzwärmen der Verbindungen wurden bestimmt. Die Zersetzung verläuft in zwei Abschnitten. In dem ersten Hauptteil entstehen in Inertgasatmosphäre Diphenyloxid, Diphenyl, Diphenylsulfon, Benzol, Phenol, Thiophenol, Diphenylsulfid, Thiantren, Diphenylenoxid und wahrscheinlich Diphenylensulfid, weiterhin Koks, Schwefeldioxid, Natriumsulfit und wenig Natriumsulfat, Natriumsulfid, Acetylen und Wasser. Im zweiten Hauptzersetzungsvorgang entstehen Natriumsulfid und Kohlenoxid. Die Produkte wurden isoliert und analysiert. Dazu wurden Derivatographie, Differentialthermoanalyse, Gaschromatographie, Infrarotspektroskopie, kontinuierliche thermische Titration und chemische Methoden gemeinsam angewandt.

---

Summary An investigation was made of the influence of the atmosphere, rate of temperature rise, and velocity of the purging gas on the thermal decomposition of alkali benzene sulfonates. The crystal water content, the dehydration temperature and heat, and if need be the composition, the kind, temperature, and heat of the modification changes, melting points and heats of fusion of the compounds, were determined. The decomposition proceeds in two stages. In the first main stage (in an inert atmosphere) the resulting compounds include diphenyl oxide, diphenyl, diphenylsulfone, benzene, phenol, thiophenol, diphenyl sulfide, thianthrene, diphenylene oxide and probably diphenylene sulfide; also coke, sulfur dioxide, sodium sulfite and a little sodium sulfate, sodium sulfide, acetylene, water. Sodium sulfide and carbon monoxide are formed in the second main decomposition. The products were isolated and analyzed. Furthermore, use was made of derivatography, differential thermal analysis, gas chromatography, infra red spectroscopy, continuous thermal titration, and chemical methods.

---

Résumé On a étudié l'influence de l'atmosphère, de la vitesse d'échauffement et de balayage du gaz, sur la décomposition thermique des benzène-sulfonates alcalins. On a déterminé la teneur en eau de cristallisation, la température et la chaleur de déshydratation, éventuellement la composition, la nature, la température et la chaleur des changements d'état, les points de fusion et les chaleurs de fusion des composés. La décomposition s'effectue en deux temps. Tout d'abord, en atmosphère inerte, il se forme de l'oxyde de diphényle, du diphényle, de la diphénylsulfone, du benzène, du phénol, du thiophénol, du sulfure de diphényle, du thianthrène, de l'oxyde de diphénylène et probablement du sulfure de diphénylène, et aussi du coke, de l'anhydride sulfureux, du sulfite de sodium et, en moins grande quantité, du sulfate de sodium, du sulfure de sodium, de l'acétylène et de l'eau. Dans une deuxième étape de la décomposition principale, du sulfure de sodium et de l'oxyde de carbone prennent naissance. On a isolé et analysé ces produits. Pour cela, on a utilisé simultanément la dérivatographie, l'analyse thermique différentielle, la chromatographie en phase gazeuse, la spectroscopie infrarouge, le titrage thermique en continu et les méthodes chimiques.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.     

Magnetic resonance study of (GdxY1−x)Co2 compounds

The results of magnetic resonance studies on ferrimagnetic (Gd_xY_1?x)Co₂ compounds, both below and above the Curie points, are presented. The ferrimagnetic resonance measurements show that the effective g values can be described by using the Wangsness relation. The spectroscopic splitting factors of cobalt atoms are not composition dependent. In the paramagnetic range the thermal variation of the linewidth is not linear and the g values are a function of temperature. This behavior is analyzed in correlation with the magnetic data.     

Ascorbic acid as a potential masking agent in the tanning process. Olated chromium complexes involving ligating ascorbate and bridging sulfate groups

Two polynuclear complexes, a dimer and a tetramer, involving sulfate and hydroxo bridges and ligating ascorbate were isolated from aqueous solutions. Structural formulae are proposed on the basis of microanalytical and thermal analysis results, i.r., ¹³C-n.m.r., mass spectral data and magnetic measurements.     

Stationary policies and Markov policies in Borel dynamic programming

Summary The question of the existence of good Markov [good stationary] policies is studied for a general class of Borel [stationary] dynamic programming models. It is shown, for example, that Markov [stationary] policies are uniformly adequate if every transition law is absolutely continuous with respect to a fixed measure [and the reward function is positive or the model satisfies certain compactness and continuity conditions].Research supported by Deutsche Forschungsgemeinschaft, Sonderforschungsbereich 72Research supported by National Science Foundation Grant MCS 8100789