在线测量电池充放电过程热功率的量热计

由于锂离子电池安全问题的严重性，它的热性质一直受到很大重视。对电池的热性质表征，传统方法主要包括单组分的热重（TG）、示差扫描（DSC）、加速量热法（ARC）等测量。由于体积较大，对于整池的热物性研究主要依赖于加速量热仪或充电／放电过程的温度检测。整池充放电过程的热耗散／吸收过程只能利用热导式量热计进行，如我们曾利用Calvet量热计对AA型Ni-MH电池在充放电过程中的热耗散进行过研究。     

铽与邻氨基苯基苯甲酸配合物的合成、表征及荧光性质

选择不同的pH值,在乙醇-水溶液中合成了铽与邻氨基苯基苯甲酸固体配合物.通过元素分析、摩尔电导、热分析、红外光谱、紫外光谱,表征并确定了配合物的化学组成为TbL4K·nH2O(n=1,2).同时,在不同pH值下合成得到的配合物的荧光性质也得到了测试和讨论,表明pH=10.0时配合物TbL4K·2H2O在544 nm处5D4→7F5跃迁的发射峰为最强.     

羟基锆及锆铝交联粘土的合成与表征

制备了锆交联粘土和锆铝交联粘土。锆交联粘土制备条件的研究表明，直接用ＺｒＯＣｌ２．８Ｈ２Ｏ水溶液作交联剂，延长老化时间和增大交联剂浓度有利于制备大比表面积高温有序的锆交联粘土。     

无火焰原子吸收测定血清中的铝

用无火焰原子吸收法测定血清中的铝,样品用高纯水十倍稀释后,用标准加入法进行测定,不需使用基体改进剂和氘灯扣除背景。方法简单、准确、灵敏度高。用含铝20ng/ml的一份十倍稀释血清样,重复测十次,变异系数5%左右。     

Exploration on regulating factors for proton transfer along hydrogen-bonded water chains.

Proton transfer along a single-file hydrogen-bonded water chain is elucidated with a special emphasis on the investigation of chain length, side water, and solvent effects, as well as the temperature and pressure dependences. The number of water molecules in the chain varies from one to nine. The proton can be transported to the acceptor fragment through the single-file hydrogen-bonded water wire which contains at most five water molecules. If the number of water molecule is more than five, the proton is trapped by the chain in the hydroxyl-centered H(7)O(3) (+) state. The farthest water molecule involved in the formation of H(7)O(3) (+) is the fifth one away from the donor fragment. These phenomena reappear in the molecular dynamics simulations. The energy of the system is reduced along with the proton conduction. The proton transfer mechanism can be altered by excess proton. The augmentation of the solvent dielectric constant weakens the stability of the system, but favors the proton transfer. NMR spin-spin coupling constants can be used as a criterion in judging whether the proton is transferred or not. The enhancement of temperature increases the thermal motion of the molecule, augments the internal energy of the system, and favors the proton transfer. The lengthening of the water wire increases the entropy of the system, concomitantly, the temperature dependence of the Gibbs free energy increases. The most favorable condition for the proton transfer along the H-bonded water wire is the four-water contained chain with side water attached near to the acceptor fragment in polar solvent under higher temperature.     

Er:Yb:KGW激光晶体生长及缺陷研究

采用顶部籽晶(TSSG)法生长ErYbKGW晶体.通过研究助熔剂的种类、组成与溶质的比例关系对晶体生长的影响,设计了合理的工艺条件转速30～40 r·min-1;拉速1～2 mm·d-1;降温生长速率0.05 ℃·h-1;降温速率15 ℃·h-1;生长周期15～20 d.通过对晶体缺陷的观察分析认为,晶体裂缝及包裹物等缺陷与生长工艺条件密切相关,应尽量减少生长过程中的温度、浓度及生长速度的波动,保持晶体的稳态生长.     

Luminescence 3D-ordered porous materials composed of CdSe and CdTe nanocrystals

The luminescence porous materials of CdTe or CdSe nanocrystals (NCs) were prepared by filling the corresponding NCs into the voids of colloidal crystal by co-deposition of polymer beads and NCs. After removing the beads with tetrahydrofuran (THF), the 3D-ordered porous materials of CdTe (or CdSe) NCs were obtained. The wavelength of maximum photoluminescence of the NCs porous material shows obvious red shift compared with their aqueous dispersion. Under the excitation of high-energy electron the porous materials of CdTe and CdSe NCs will emit photons that can be collected to form a cathode luminescence (CL) image.     

氯化钙/水-醇溶液稀释热

电解质溶液稀释热是溶液的重要热性质之一．由它可计算不同浓度下电解质的溶解热、表现相对摩尔焓、溶液中反应热和化合物生成热等．在电解质溶液理论研究中，稀释热也是重要的基础数据．由稀释热可推算溶液中组分的活度系数、渗透系数、相对偏摩尔焓及表观摩尔热容等[1-3]．在化工生产中，稀释热是化工过程能量计算不可缺少的数据．电解质水溶液稀释热已有不少研究[2，4]．但电解质混合溶剂体系稀释热报导甚少．随着加盐精馏技术、海水淡化技术等研究的进展，急需这方面数据．本文作者已报告了CaCl2／C2H5OH－H2O体系[5]和CaCl2／n－C…     

水溶性高聚物的研究进展

自八十年代初，水溶性高聚物再次成为高分子科学研究热点，评述了水溶性高聚物，特别是疏水缔合型改性水溶性高聚物的最新进展。     

异咯嗪蒙脱石修饰电极的电化学行为

应用十六烷基三甲基溴化铵对蒙脱石进行改性，成功地制备稳定性良好的异咯嗪蒙脱石修饰电采，用循环伏安法对此修饰电极的电化学行为进行了研究。测定了异咯嗪在蒙脱石膜内的化学扩散系数，对异咯嗪在改性蒙脱石中电极反应机制进行了探讨。