新型氮芥和卤代烷基哌嗪芳香醛的合成

通过对Vilsmeier反应、烷基化反应和氯化反应的改进提出了以简单易得的苯胺和苯基哌嗪为原料制备氮芥和哌嗪芳香醛的方法. 采用该改进的方法合成了8个氮芥和哌嗪芳香醛, 其中7个为新化合物. 它们的结构均经质谱、红外光谱、核磁共振谱和元素分析确证.     

[Co(amp)2Cl2]2[ZnCl4]体系中两对称异构体的2D NMR研究

The two symmetrical isomers in [Co(amp)₂Cl₂]₂[ZnCl₄](amp=2-(Aminomethyl)pyridine) system were syn-thesized by general oxidation method and were separated by chromatography and recrystallization method. Their configurations were assigned by using 2D NMR techniques, particularly the NOESY NMR spectra. Solvent used was Me₂SO-d₆ with the central peak of the CD₃ septet as the reference ( ₁₃C,δ 39.37; ₁H,δ 2.49 relative to SiMe₄). Cation exchange media used was Dowex 50Wx 2(H⁺ form, 200～400mesh; Biorad).     

丙烯酸甲酯-氰尿酸三烯丙酯共聚物的合成及其孔结构的研究Ⅰ.

氰尿酸三烯丙酯(TAC)与丙烯酸甲酯(MA)在致孔剂如环己烷、正丁醚或甲苯-汽油(200~#)存在下,用悬浮聚合得到一系列大孔共聚物。对这些共聚物孔结构的研究表明,它们的平均孔径达10000—80000(?),同时研完了致孔剂的分子结构和用量对共聚物孔结构的影响,并初步讨论特大孔共聚物形成的机理。     

过硫酸盐和N,N,N′,N′-四甲基乙二胺体系引发烯类聚合机理的研究

<正> 过硫酸盐和N,N,N′,N′-四甲基乙二胺(TMEDA)体系用作烯类聚合的引发剂已有报道。本文报道该引发体系的反应机理。1.实验方法     

THE SEPARATION,PURIFICATION AND DECOLORIZATION OF NEW ANTIBIOTICS-MILUPEINAN USING ADSORPTION RESIN

1. INTRODUCTION Fig.1 The Chemical Structure of Milupeinan As a new type of antibiotics Milupeinan, not only possesses antibacterial activities against a wide range of Gram-positive and Gram-negative bacteria, but also higgh stability under th…     

新型(E)-1-取代苯基-3-(3''''-取代吲哚基)-2-丙烯酮类化合物的合成和抗炎活性研究

设计合成了一系列新的席合物3a～3p, 其结构经 1H NMR, IR, LC/MS确证. 用化合物对小鼠耳部巴豆油炎症影响的炎症模型测定化合物3a～3i的生物活性, 结果表明, 化合物3d, 3f, 3g可明显抑制巴豆油致小鼠耳部炎症. 其抑制率分别为19.5%, 27.6%, 16.1%.     

PSt-b-PEO增容PA6/PS共混体系的研究

采用动态力学方法（ＤＭＡ），形态学方法（ＳＥＭ），研究了ＰＳｔ ｂ ＰＥＯ存在下尼龙６（ＰＡ６）／聚苯乙烯（ＰＳ）共混体系的相容性．研究表明，ＰＡ６和ＰＳ的简单共混体系，分散相相畴尺寸大，相界面清晰，断裂面光滑，呈脆性断裂，相容性极差，属不相容体系．而加入少量ＰＳｔ ｂ ＰＥＯ后分散相尺寸变小，界面层变厚，界面粘结力增强，表现出韧性特征．     

1,2,4-三苯基环戊二烯的合成及其烷基化反应

测定了颇哪醇在酸性条件下所得的脱水产物的分子结构.结果表明,在酸性条件下颇哪醇的脱水反应优于重排反应,由此合成了1,2,4-三苯基环戊二烯.该环戊二烯衍生物的烷基化反应,在通常条件下优先发生在碳环的第5位碳原子上,但在苛刻的剧烈反应条件下,进而发生在碳环的第3位碳原子上.讨论了脱水反应和烷基化反应的机理.     

Aqueous dispersions of single-wall and multiwall carbon nanotubes with designed amphiphilic polycations

Poor solubility of single-walled and multiwalled carbon nanotubes (NTs) in water and organic solvents presents a considerable challenge for their purification and applications. Macromolecules can be convenient solubilizing agents for NTs and a structural element of composite materials for them. Several block copolymers with different chemical functionalities of the side groups were tested for the preparation of aqueous NT dispersions. Poly(N-cetyl-4-vinylpyridinium bromide-co-N-ethyl-4-vinylpyridinium bromide-co-4-vinylpyridine) was found to form exceptionally stable NT dispersions. It is suggested that the efficiency of macromolecular dispersion agents for NT solubilization correlates with the topological and electronic similarity of polymer-NT and NT-NT interactions in the nanotube bundles. Raman spectroscopy and atomic force and transmission electron microcopies data indicate that the polycations are wrapped around NTs forming a uniform coating 1.0-1.5 nm thick. The ability to wind around the NT originates in the hydrophobic attraction of the polymer backbone to the graphene surface and topological matching. Tetraalkylammonium functional groups in the side chains of the macromolecule create a cloud of positive charge around NTs, which makes them hydrophilic. The prepared dispersions could facilitate the processing of the nanotubes into composites with high nanotube loading for electronic materials and sensing. Positive charge on their surface is particularly important for biological and biomedical applications because it strengthens interactions with negatively charged cell membranes. A high degree of spontaneous bundle separation afforded by the polymer coating can also be beneficial for NT sorting.     

循环流化床生物质气化炉内计算流体动力学模拟——鼓泡流化床内改进的颗粒床模型（英文）

采用改进颗粒床模型的CFD方法模拟了实验室规模冷模装置内鼓泡床的流体流动时空特性。模拟结果表明表观气速是影响气固动态特征和压力波动的主要因素之一：随表观气速的增大，气泡数目增加，气泡体积增大，压力波动增强；气速越高时均压降越大；在内循环鼓泡流化床内固体颗粒呈“单室”流型。上述与实验观察相吻合的模拟结果将有助于放大和设计商业化的内循环流化床生物质气化炉。