Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

THE Py SCALE OF SOLVENT POLARITIES. SOLVENT EFFECTS ON THE VIBRONIC FINE STRUCTURE OF PYRENE FLUORESCENCE and EMPIRICAL CORRELATIONS WITH ET and Y VALUES

Abstract— Pyrene fluorescence spectra have been run in 62 solvents of widely differing solvent polarity. As has been noted previously, the intensity ratio of the first (the 0–0 band) and third bands in vibronic fine structure of these spectra are very sensitive to solvent polarity. These I ₁/ I ₃ values, however, are not sensitive to hydrogen bonding aspects of solvent-solute interactions. Correlations are reported with Winstein's Y values and with Dimrotb's E _T values. On this basis the I ₁/ I ₃ values for pyrene fluorescence are suggested as the basis for a new empirical scale of solvent polarity, called the Py scale, which offers certain conveniences over other scales of solvent polarity.     

273.15 K下Li2B4O7-LiCl-H2O体系热力学性质的等压研究及离子作用模型

用等压法研究了273.15 K下Li₂B₄O₇-LiCl-H₂O体系不同质量摩尔浓度分数的等压平衡浓度和水活度; 计算了LiCl和Li₂B₄O₇混合盐溶液的渗透系数等热力学性质. 用273.15 K下的实验数据对Pitzer离子相互作用模型进行了参数化研究, 拟合求取了273.15 K下Pitzer离子相互作用参数, 用获得的参数计算了LiCl和Li₂B₄O₇在Li₂B₄O₇-LiCl-H₂O体系中的活度系数. 273.15 K下由相应的Pitzer模型计算的渗透系数值与实验结果一致. 这对完善含锂、硼盐湖卤水体系的热力学模型具有重要意义.     

The Synthesis of Some New N‐[1‐(2,5‐Dichlorophenyl)‐5‐Methyl‐1,2,3‐Triazol‐4‐yl]‐Carbamic Acid Ester Derivatives

The synthesis of some new N‐[1‐(2,5‐dichlorophenyl)‐5‐methyl‐1,2,3‐triazol‐4‐yl]‐carbamic acid ester derivatives are reported in this paper. The yielded products 6a‐l were confirmed by Elemental analyses, NMR, MS, and IR spectra.     

A multiple coupling approach to produce high-performance SERS substrates

In this work, large area gold-nanoparticle-cluster pillar array with a gold mirror as high-performance SERS substrate was facilely fabricated by combined use of nanosphere lithography and self-assembly approach.     

Machine learning dielectric screening for the simulation of excited state properties of molecules and materials

Accurate and efficient calculations of absorption spectra of molecules and materials are essential for the understanding and rational design of broad classes of systems. Solving the Bethe–Salpeter equation (BSE) for electron–hole pairs usually yields accurate predictions of absorption spectra, but it is computationally expensive, especially if thermal averages of spectra computed for multiple configurations are required. We present a method based on machine learning to evaluate a key quantity entering the definition of absorption spectra: the dielectric screening. We show that our approach yields a model for the screening that is transferable between multiple configurations sampled during first principles molecular dynamics simulations; hence it leads to a substantial improvement in the efficiency of calculations of finite temperature spectra. We obtained computational gains of one to two orders of magnitude for systems with 50 to 500 atoms, including liquids, solids, nanostructures, and solid/liquid interfaces. Importantly, the models of dielectric screening derived here may be used not only in the solution of the BSE but also in developing functionals for time-dependent density functional theory (TDDFT) calculations of homogeneous and heterogeneous systems. Overall, our work provides a strategy to combine machine learning with electronic structure calculations to accelerate first principles simulations of excited-state properties.

Machine learning can circumvent explicit calculation of dielectric response in first principles methods and accelerate simulations of optical properties of complex materials at finite temperature.     

新型聚醚的合成与表征

用高活性催化剂催化环氧丙烷开环聚合得到一类新型高质量聚醚。对产物进行IR和NMR表征和分析,并探讨了合成工艺条件。结果表明,调节单体与调节剂的比例,控制反应温度在100 5℃,压力在0.15 ~ 0.25 MPa ,可得到不饱和度低、相对分子质量可控、相对分子质量分布窄的聚醚产品。     

Synthesis and Properties of Polyetherketones Containing Sulfide and Phthalazinone

High molecular weight copoly(ether ketone)s (PEK) based on 4-(4-hydroxyphenyl)-1-phthalazinone (DHPZ)/4,4′-thiobisphenol (TBP)/4,4′-diflourodiphenylketone (DFK) were prepared by nucleophilic substitution polycondensation. The copolymers were characterized by FT- and ^1H-NMR. Thermal properties and solubility of copolymers were studied.     

Synthesis and Crystal Structure of a New Quinazolinone Compound 2,3-Dihydro-2-（2-hydroxyphenyl）-3-phenyl-quinazolin-4（1H）-one

A new quinazolinone compound 2,3-dihydro-2-(2-hydroxyphenyl)-3-phenylquinazolin-4(IH)-one 3 ([C2oH16O2N2]-C2H5OH, Mr = 362.42) and compound 2-(2-hydroxybenzylidene-amino)-N-phenyl-benzamide 2 (C2oH16O2N2, Mr = 316.34) were prepared from a precursor of 2-amino-N-phenyl-benzamide 1 (C13H12ON2, Mr = 212.25). Compound 3 was characterized by single-crystal X-ray diffraction analysis. The crystal belongs to orthorhombic,space group Pbca with a = 1.2889(11), b = 1.6170(14), c = 1.7729(15) nm, V= 3.695(6) nm^3, Z= 8, F(000) = 1536, Mr = 362.42, Dc = 1.303 g/cm^3, μ(MoKa) = 0.087 mm^-1, R = 0.0447 and wR= 0.0879. The crystal structure analysis indicates that the title compound has a two-dimensional network structure formed by hydrogen bonds and electrostatic interactions.