取代苯体系的二阶非线性光学性质:动力学李代数方法

提出了一种动力学李代数方法来研究取代苯体系的非线性光学性质. 对于给定的PPP模型(Pariser-Parr-Pople)哈密顿量, 生成了一个动力学李代数. 依据这些代数元构造出演化算子作为群参数的函数, 通过求解一组非线性微分方程能够得到这些群参数. 再按照统计力学中的密度算子公式给出取代苯分子体系偶极矩的统计平均值. 于是导出二阶极化率的表达式. 与其他量子力学计算结果比较, 表明这种动力学李代数方法在预言有机共轭分子的非线性光学性质上同样有用.     

Certification of total mercury and methylmercury concentrations in mussel homogenate (Mytilus edulis) reference material, IAEA-142

Due to the increased demand for new reference materials certified for total and methylmercury (MeHg) a sample of mussel homogenate (IAEA-142) has been prepared. Thirteen experienced laboratories reported results for total Hg of which 9 laboratories also reported results for MeHg content. Laboratories reporting MeHg results used various isolation techniques (solvent extraction, saponification, acid leaching, ion-exchange separation, and distillation) and detection systems (cold vapour atomic absorption spectrometry (CV AAS), cold vapour atomic fluorescence spectrometry (CV AFS), gas chromatography with electron capture detector (GC/ECD) and HPLC with CV AAS detector). In the case of total Hg, most of the laboratories used acid digestion, only two used alkaline dissolution, followed either by CV AAS or CV AFS. One laboratory used neutron activation analyses with radiochemical separation. The data received were in good agreement. The value for total Hg was certified to be 126 ng/g, with a 95% confidence interval from 119 to 132 ng/g. For MeHg the certified value of 47 ng/g expressed as Hg was assigned, with a 95% confidence interval from 43 to 51 ng/g. Stability testing has shown that both total and MeHg are stable if samples are stored in a dry and dark place at room temperature. The sample is now available as a certified reference material and is, in particular, useful for quality control measurements of Hg and MeHg in mussel samples at low concentration levels.     

Synthesis of 5-fluoro-2-methyl-3-(2-trifluoromethyl-1,3,4-thiadiazol-5-yl)-4(3H)-quinazolinone and related compounds with potential antiviral and anticancer activity

The synthesis of ten new substituted 1,3,4-thiadiazolyl-4(3H)-quinazolinones 8–11, 13, 17 , and 20–23 is reported. Compounds 8–11 were prepared by condensation of 5-fluoro-2-methyl-3,1-benzoxazin-4-one (3) and 5-substituted 2-amino-1,3,4-thiadiazoles 4–7. Compound 13 was obtained by condensation of 5-fluoro-2-methyl-3,1-benzoxazin-4-one (3) with DL-α-amino-?-caprolactam (12) . Compound 17 was synthesized by condensation of 6-bromo-2-methyl-3,1-benzoxazin-4-one (16) and 2-amino-5-t-butyl-1,3,4-thiadiazole (5) . Compounds 20–23 were obtained by condensation of 5-chloro-6,8-dibromo-2-methyl-3,1-benzoxazin-4-one (19) and 5-substituted 2-amino-1,3,4-thiadiazoles 4–7, respectively. The substituted 3,1-benzoxazin-4-ones 3, 16, and 19 were obtained in good yield by refluxing the appropriate anthranilic acid, 1,15 , and 18 with acetic anhydride (2) .     

Are the pyrazolines formed from the reaction of [60]fullerene with alkyl diazoacetates unstable?

[60]Fullerene-fused pyrazolines 1 were prepared by the reaction of C₆₀ with alky diazoacetates under the solid-state high-speed vibration milling conditions as well as in toluene solution. Pyrazolines 1 were stable in refluxing toluene and its thermolysis process in 1,2-dichlorobenzene was investigated, the decomposition rates and activation energies of pyrazolines 1 were obtained. The current work demonstrated that the liquid-phase reaction of C₆₀ with alkyl diazoacetates undergoes via 1,3-dipolar cycloaddition pathway at room temperature, or proceeds via carbene mechanism at a temperature of refluxing toluene, thus clarifies the previous ambiguity of its reaction mechanism.     

PA.FPNS: its synthesis and use in spectrophotometric determination of magnesium

A new polymeric chromogenic reagent PA.FPNS has been synthesized by condensing polyallylamine (PA) with 3-(4-formylphenylazo)-4,5-dihydroxynaphthalene-2,7-disulfonic acid (FPNS) and its properties studied. In alkaline media, PA.FPNS reacts with magnesium to form a water-soluble blue complex, whose absorption maximum is at 604 nm. The molar absorptivity (varepsilon) of the complex is 5.2 x 10(4)l mol(-1) cm(-1), which is four times that of the FPNS-Mg complex, and Beer's law is obeyed over the range 0-0.35 mug ml(-1) magnesium. Compared to the corresponding low-molecular-weight FPNS and other chromogenic reagents, PA.FPNS offers considerably improved sensitivity and selectivity for magnesium, which may be attributed to incorporating FPNS into a water-soluble polymer and the effect of the polymeric chain on the reaction microenvironment. Also, a simple and sensitive spectrophotometric method for the determination of magnesium has been developed and applied to water and human fluid samples with satisfactory results.     

Soft vesicles formed by diblock codendrimers of poly(benzyl ether) and poly(methallyl dichloride)

The synthesis of a block codendrimer (g3-PBE-b-g3-PMDC), composed of a third-generation poly(benzyl ether) (PBE) monodendron and an aliphatic polyether (PMDC) monodendron is reported. In THF/diiospropyl ether (1:1) the PMDC block functions as a "hydrophilic" block, while the PBE acts as a "hydrophobic" block. The codendrimer can form interdigitated layers leading to vesicle formation. Tapping mode atomic force microscopy (AFM), dynamic light scattering (DLS), and transmission electron microscopy (TEM) were used to characterize the vesicles. The effect of molecular architecture on the formation of the interdigitated layers and vesicles was studied.     

Templateless assembly of molecularly aligned conductive polymer nanowires: a new approach for oriented nanostructures

Although oriented carbon nanotubes, oriented nanowires of metals, semiconductors and oxides have attracted wide attention, there have been few reports on oriented polymer nanostructures such as nanowires. In this paper we report the assembly of large arrays of oriented nanowires containing molecularly aligned conducting polymers (polyaniline) without using a porous membrane template to support the polymer. The uniform oriented nanowires were prepared through controlled nucleation and growth during a stepwise electrochemical deposition process in which a large number of nuclei were first deposited on the substrate using a large current density. After the initial nucleation, the current density was reduced stepwise in order to grow the oriented nanowires from the nucleation sites created in the first step. The usefulness of these new polymer structures is demonstrated with a chemical sensor device for H(2)O(2), the detection of which is widely investigated for biosensors. Finally, we demonstrated that controlled nucleation and growth is a general approach and has potential for growing oriented nanostructures of other materials.     

Catalytic Spectrophotometric Determination of Ultratrace Amounts of Silver with Solubilizing Effect of Nonionic Surfactant

ＩｎｔｒｏｄｕｃｔｉｏｎＴｒｉａｚｅｎｅｒｅａｇｅｎｔｓａｒｅｉｎｔｅｒｅｓｔｉｎｇｂｅｃａｕｓｅｏｆｔｈｅｉｒｓｔｒｏｎｇｃｏｍｐｌｅｘａｔｉｏｎａｂｉｌｉｔｉｅｓｗｉｔｈｔｒａｎｓｉｔｉｏｎｍｅｔａｌｓ .1 6Ｈｏｗｅｖｅｒ,ｌｉｔｔｌｅｄｅｃｏｌｏｒａｔｉｏｎｏｆｔｈｅｍｃａｔａｌｙｚｅｄｂｙｓｉｌｖｅｒｉｏｎｈａｓｂｅｅｎｓｔｕｄｉｅｄｉｎａｎａｌｙｔｉｃａｌｃｈｅｍｉｓｔｒｙ .Ｍａｎｙａｎａｌ ｙｓｉｓｔｓｈａｖｅｒｅｐｏｒｔｅｄｔｈｅｕｓｅｏｆｃａｔａｌｙｔｉｃｒｅａｃｔｉｏｎｓｆｏｒｔ…     

Tetra‐μ‐acetato‐κ2O:O′‐bis[(4‐phenylpyridine‐κN)copper(II)]

The title compound, [Cu₂(C₂H₃O₂)₄(C₁₁H₉N)₂] or [Cu₂(MeCO₂)₄(phpy)₂] (phpy is 4‐phenyl­pyridine), consists of centrosymmetric dimers in which the Cu^II atoms display a square‐pyramidal CuO₄N coordination, with four acetate O atoms in the basal plane [Cu—O 1.975 (3)–1.987 (3) Å] and the phpy N atom in the apical position [Cu—N 2.150 (3) Å]. The Cu atoms are 2.654 (1) Å apart and are bridged by four acetate groups. The discrete dimers are extended into a three‐dimensional supramolecular array through intermolecular π–π‐stacking interactions.     

Single-walled carbon nanotube-based coaxial nanowires: synthesis, characterization, and electrical properties

We report herein the template-directed synthesis, characterization, and electric properties of single-walled carbon nanotube- (SWNT-) based coaxial nanowires, that is, core (SWNT)-shell (conducting polypyrrole and polyaniline) nanowires. The SWNTs were first dispersed in aqueous solutions containing cationic surfactant cetyltrimethylammonium bromide (CTAB) or nonionic surfactant poly(ethylene glycol) mono-p-nonyl phenyl ether (O pi-10). Each individual nanotube (or small bundle) was then encased in its own micellelike envelope with hydrophobic surfactant groups orientated toward the nanotube and hydrophilic groups orientated toward the solution. And thus a hydrophobic region within the micelle/SWNT (called a micelle/SWNT hybrid template) was formed. Insertion and growth of pyrrole or aniline monomers in this hybrid template, upon removal of the surfactant, produce coaxial structures with a SWNT center and conducting polypyrrole or polyaniline coating. Raman and Fourier transform infrared (FTIR) spectroscopy and scanning (SEM) and transmission (TEM) electron microscopy were used to characterize the composition and the structures of these coaxial nanowires. The results revealed that the micellar molecules used could affect the surface morphologies of the resulting coaxial nanowires but not the molecular structures of the corresponding conducting polymers. Electric properties testing indicated that the SWNTs played the key roles in the conducting polymer/SWNT composites during electron transfer in the temperature range 77 K to room temperature. Compared with the SWNT network embedded in the conducting polymers, the composites within which SWNTs were coated perfectly by the identical conducting polymers exhibited higher barrier heights during electron transfer.