Organic Nanocrystals Based on a Solid-emission-tunable AIEgen for Cell Imaging

The development of fluorescent nanocrystals based on organic small molecules is of great importance in bioimaging due to the merits of easy modification,high brightness and excellent photostability,however suffering from the emission-detrimental aggregation-caused quenching(ACQ)effect.Herein,we successfully designed and synthesized an AIE-active di(N,N-dimethylaniline)-dibenzofulvene(named as NFTPE),which exhibits the crystallization-induced emission enhancement(CIEE)effect.Interestingly,two types of yellow-and orange-emissive crystals for NFTPE were obtained,exhibiting aggregation microenvironment-dependent emission tuning in the solid state.Single-crystal analysis and density functional theory(DFT)calculations reveal that different aggregation microenvironments result in the distinct molecular conformation for various emission.Excitingly,the crystallization of NFTPE in an aqueous solution under the assistance of amphiphilic PEG polymer matrices could be monitored in situ by the fluorescence changes,facilitating the preparation of NFTPE nanocrystals(NFTPE-NCs)by adjusting the aggregation microenvironment.The obtained NFTPE-NCs exhibit the superior performance in cell imaging in respect to high brightness,photostability,and biocompatibility,thus demonstrating the potential in bioimaging applications.     

有机杂化锡硫化合物[Ni(tepa)]2 (μ2 -Sn2 S6 )的溶剂热合成及晶体结构

利用溶剂热法合成了有机杂化锡硫化合物[Ni(tepa)]2(μ2-Sn2S6)(1,tepa=四乙烯五胺),其结构和光吸收特性经IR,元素分析和UV表征,晶体结构由X-射线单晶衍射仪测定。1属于四方晶系,空间群为I41/a,晶胞参数:a=0.909 0(17)nm,b=1.305 1(2)nm,c=1.299 2(2)nm,β=92.918(4)°,V=1.539 3(5)nm3,Z=4,Mr=462.89 g.mol-1,Dc=1.997 g.cm-3,μ=3.243 mm-1,F(000)=928,R1=0.070 2,wR2=0.151 2[I>2σ(I)],S=1.075。1中Ni2 离子与tepa配体的5个N原子和[Sn2S6]4-阴离子的一个端基S原子配位,形成了畸变八面体几何构型。[Sn2S6]4-阴离子作为桥连配体,通过端基S原子与[Ni(tepa)]2 配阳离子连接形成了中性的中心对称化合物[Ni(tepa)]2(μ2-Sn2S6)。     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

PREPARATION AND PROPERTIES OF CLAY/POLY(N-ISOPROPYLACRYLAMIDE-co-ACRYL AMIDE)NANOCOMPOSITE HYDROGELS

Polymer hydrogels as a kind of soft materials have attracted increasing scientific and technological interest in past several decades. These materials have been applied widely in many fields [1], such as molecular filter [2,3], superabsorbent [4], and contact lenses [5] etc. However, synthetic polymeric hydrogels are seldom used as mechanical devices due to the lack of mechanical strength. Therefore, it is very imperative to improve their mechanical properties for wider use of polymeric hydrog…     

杜氏盐藻多糖的高效体积排阻色谱的保留特性及其分析方法的研究

通过对从杜氏盐藻中提取出的不同多糖级分在高效体积排阻色谱柱(Waters Ultrahydragel Linear,7.8 mm i.d.×300 mm,2根串联)上的保留特性的考察及其分离分析条件的优化,建立了高效体积排阻色谱分析盐藻多糖平均相对分子质量及其分布的方法。结果表明:流动相中盐的种类及其浓度、pH值对3种酸性多糖级分(特别是硫酸化多糖级分PD4a)的保留行为有显著影响;在柱温为45 ℃,流速为0.9 mL/min条件下,使用0.1 mol/L的NaAc水溶液作流动相基本上能消除非特异性吸附作用及分子间缔合等因素的干扰,使各多糖级分基本以非缔合状态按立体排除机制保留和分离。在优化的色谱条件下,测得的盐藻多糖5个级分的重均相对分子质量(Mw)分别为1548000,33000,67000,424000,10000;测得的硫酸化多糖级分PD4a的Mw和峰面积的相对标准偏差分别为1.7%和 0.88%(n=5)。     

不同形状的钨酸钡纳米粒子的合成

不同形状的钨酸钡纳米粒子的合成;微乳液;钨酸钡;纳米粒子;十二胺;十一烯酸     

高速逆流色谱法对废次烟草中茄尼醇的分离制备

高速逆流色谱法(HSCCC)是80年代初期发展起来的一种无需使用任何固态支持介质的液液分配色谱分离技术,样品的各组分是根据其在两相中的分配系数不同被分离开的.由于不使用固态支持介质,避免了因不可逆吸附而引起的样品损失、失活变性等.高速逆流色谱法已广泛应用于天然产物有效成分的分离.     

N,N-双(α-萘基-苯基)-4,4''''-联苯二胺纳米管的制备及其光谱行为

利用多孔氧化铝作模板采用熔融法成功制备了一种定向有序排列的有机小分子(NPB)纳米管,并用场发射扫描电镜(FESEM)、 X射线能量损失谱(EDX)、透射电子显微镜(TEM)和荧光显微镜对其进行了表征.发现该纳米管具有整齐的形貌和规整的尺寸.进一步的研究表明,多孔氧化铝模板的亲油亲水处理对能否成功地大量获得纳米管起到非常重要的作用.值得注意的是,在对不同尺寸纳米管材荧光光谱的测定中,可明确观察到材料光学性质的尺寸依赖性.     

双通氧化铝模板制备及其填充NiO的研究

制备具有双通纳米孔道填充过渡金属氧化物NiO的氧化铝模板,初步表征其电化学性质.结果发现,该氧化铝模板的纳米孔道结构均匀,孔道直径约为 50nm,所填充的纳米NiO层厚度相对均匀,并具有较好的循环稳定性.     

可生物降解的pH敏感水凝胶的合成及其溶胀性能研究

采用明胶和聚乙烯醇为原料,制备了戊二醛交联、明胶／聚乙烯醇配比不同的水凝胶,并用FTIR和SEM对产物进行了表征。研究了凝胶的溶胀动力学,结果表明,原料配比对各种凝胶的溶胀速率影响不大,而对平衡溶胀比与原料配比有关,室温下凝胶的平衡溶胀比在300％～500％之间。pH敏感性研究表明,几种凝胶均表现出明显的pH响应性,当溶胀介质的pH值在明胶等电点附近时,水凝胶的溶胀比达到最小值,凝胶的溶胀-消溶胀动力学曲线呈“W”形,即该凝胶具有形状记忆功能。