双预脉冲驱动X射线激光实验研究

 在“星光-Ⅱ”激光装置上进行了双预脉冲驱动类氖铬X射线激光实验，介绍了实验方法和实验结果，并对结果进行了简短讨论。由于目前“星光”装置输出能量较低，所进行的双预脉冲驱动未能显著提高X射线激光强度，改变预脉冲幅度时X射线激光强度也未有显著变化。利用MED103程序进行了模拟计算，其结果与实验结果一致。     

Diffusion of 99Tc in granite under aerobic and anoxic conditions

Summary  Vezetéknév     

Oligomeric guanidine synthesis assisted by TFA-sensitive arylsulfonylthiourea

Through arylsulfonyl activation of thiourea, efficient synthesis of oligomeric guanidines can be achieved in either solution or solid-phase. Incorporation of TFA-sensitive arylsulfonyl groups, such as Pbf, during the synthesis greatly simplifies deprotection procedures for obtaining the final oligomeric guanidine products.     

光纤陀螺随机误差的滤波方案的探讨

范跃祖，宁文如，刘剑．光纤陀螺随机误差的滤波方案的探讨．数理统计与管理，１９９７，１６（４），２９～３２．光纤陀螺是新一代的光学陀螺仪，它的性能决定着惯性参照系统的精度。光纤陀螺的误差分为两大类。一类是有规律的，另一类是随机的。本文提出了两种新的用于光纤陀螺随机误差补偿的Ｋａｌｍａｎ滤波方案，考虑了两种随机模型：（Ⅰ）角速度变化为等随机的；（Ⅱ）角速度变化为等随机加速的。仿真结果表明，第二种方案对噪声起到了很好的抑制作用和滤波效果     

类锂硅离子软X射线激光研究

在激光等离子体典型参数条件下，利用碰撞－辐模型计算了类锂硅离子５ｆ－３ｄ和４ｆ－３ｄ跃的粒子数反转比率和激光增益系数。讨论了不同热带条件和不同冷却速度下，激光增益系统数的变化。计算结果表明，高功率，短脉冲激光生产的高温等离子体在快速冷却条件下能产生软Ｘ射的线激光增益。     

The Existence of Periodic Orbits for Higher Dimensional Autonomous Systemswith Small Perturbations

ＴｈｅＥｘｉｓｔｅｎｃｅｏｆＰｅｒｉｏｄｉｃＯｒｂｉｔｓｆｏｒＨｉｇｈｅｒＤｉｍｅｎｓｉｏｎａｌＡｕｔｏｎｏｍｏｕｓＳｙｓｔｅｍｓｗｉｔｈＳｍａｌｌＰｅｒｔｕｒｂａｔｉｏｎｓＪｉａｎｇＬｉｑｉｎｇ（蒋里强）；ＺｈｏｕＹｉ（周毅）；ＦａｎＹｅ（范晔）（...     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

煤颗粒燃烧破碎特性及其分数维理论

本文采用激光衍射法和光学显微计算机图像系统及自行开发的软件,测量了三个典型煤在快速加热初期燃烧、等温加热燃烧和火焰燃烧方式的颗粒尺寸,运用分数维理论,建立了煤燃烧颗粒破碎理论,实验和理论研究揭示了煤燃烧中颗粒尺寸变化的本质,理论计算和实验结果符合良好。     

“J—646”新型光学光敏胶胶合工艺简介

“J—646”光敏胶具有透光率好,收缩率小,粘接强度适中,耐老化,毒性小和成本低廉等特点。本文简要介绍了该胶的胶合工艺。     

不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.