Synthesis of N-（α-Alkoxyalkyl）benzotriazoles Catalyzed by Acidic Ionic Liquid at Room Temperature

N-（α-Alkoxyalkyl）benzotriazoles were synthesized via the condensation of benzotriazole with various aldehydes and alcohols catalyzed by acidic ionic liquid [hmim]HSO4 at room temperature. The yield was up to 99%. This novel method was effective when triethoxymethane was utilized instead of alcohols. Moreover, acidic ionic liquid could be reused easily with no significant degradation of its catalytic activity.     

Synthesis of 2,2＇-（Substituted Arylmethylene）bis（1,6,6-trimethyl 6,7,8,9-tetrahydrophenanthro[1,2-b]furan-10,11-dione） Derivatives

The reactions of tanshinone IIA with aromatic aldehydes have been investigated and several 2, T-（substituted arylmethylene） bis （1,6,6-trimethyl-6,7,8,9-tetrahydrophenanthro[1,2-b]- furan- 10, 11-dione） derivatives were obtained,     

生物体系中电子转移机理的研究Ⅱ: 分子间电子转移及 电子供、受体间不同基 团的影响

利用自编程序MOPAC-ET中AM1方法,及KT(Koopman'sTheorem)法,研究了二苯负离子体系的分子间电子转移现象,计算了其电子供、受体在不同距离下的V~A~B及它们之间的相关性,另外,还对两苯环间不同介入基团对电子转移的影响做了初步研究,发现不同的介入基团存在着较大的差异。     

水合醋酸铈直接热分解制备超细氧化铈及其抛光性能

Ultra fine ceria was prepared by calcining hydrate cerium acetate. The effects of pyrolysis temperature on the particle size, morphology, specific surface area and loose packing density of ceria were investigated, and the removal rate of optical glasses polishing by ceria was determined. The results show that with the increase of pyrolysis temperature, the loose deposit density and crystallinity increases and the specific surface area decreases, however, the particle size decreases firstly and then increases, the minimum medium particle size D₅₀ is 0.47 μm at pyrolysis temperature of 1 000 ℃. The SEM images of ceria prepared by the decomposition at 800 ℃ or at 1 100 ℃ show porous powders or quasi-sphere small particles with loosely agglomeration, respectively. It was found that the removal rate varied with pyrolysis temperature in preparation of ceria and the property of glass polished. The removal rate for three kinds of glasses was in the order of ZF7> F1> K9, and the maximum value appeared at around 1 000 ℃ for ZF7 and F1, and at around 1 100 ℃ for K9.     

气相色谱过程的计算机模拟及操作条件的优化

建立了气相色谱过程的动态数学模型,给出了模型的实用算法,并据此对各种操作条件下的色谱流出曲线进行了动态模拟计算。模拟计算结果表明该模型是有效的,能够用于各种程序控制的色谱过程,可得到色谱分离的优化条件。     

层状锑磷酸嵌接式卟啉锰制备与模拟细胞色素氧化催化研究

层状锑磷酸嵌接式卟啉锰制备与模拟细胞色素氧化催化研究胡希明，皮宗新，梅治乾，古国榜，黄仲涛（华南理工大学应用化学系，华南理工大学化学工程系，广州，５１０６４１）关键词卟啉锰，层状锑磷酸，嵌接，催化性能细胞色素Ｐ４５０是一种含血红素的单充氧化酶，在室温...     

三维网状的4-羧基苯氧乙酸锶(Ⅱ)配位聚合物[Sr2(4-CPOA)2(H2O)5]n的合成、结构与热稳定性研究

A novel coordination polymer of [Sr₂(4-CPOA)₂(H₂O)₅]_n (where 4-CPOA^2- is 4-carboxylphenoxyacetate) has been synthesized and characterized by elemental analysis, IR, TG and single crystal X-ray diffraction. The title complex belongs to monoclinic system with space group C2/c, a=2.563 9(5) nm, b=1.162 7(2) nm, c=0.742 96(15) nm, β=99.64(3)°. V=2.183 5(7) nm³, Z=4, M_r=653.60, D_c=1.988 g·cm^-3, R=0.027 8, wR=0.058 1. The strontium atom has a bicapped triangular prismatic coordination geometry, involving four oxoacetate oxygen atoms, one ether oxygen atom from different 4-CPOA^2- ligands and three water molecules. The strontium(Ⅱ) ions are linked by 4-CPOA^2- ligands and water molecules to form a 3D network structure. CCDC: 223313.     

用DCC/DMAP合成N-苄氧羰基氨基酸薄荷酯

以乙腈为溶剂, 用DCC/DMAP偶合法合成了5个N-苄氧羰基氨基酸薄荷酯, 产率90%～94%. 起始原料氨基酸包括: 甘氨酸, DL-蛋氨酸, β-丙氨酸, L-缬氨酸和L-脯氨酸. 给出了目标产物的氢谱、碳谱、红外光谱、质谱、高分辨质谱和元素分析数据.     

丙酮中除虫脲溶液标准物质研制

采用重量-容量法制备丙酮中除虫脲溶液标准物质。准确称量国家二级标准物质除虫脲溶解到色谱纯丙酮中,通过A级容量瓶定容至500 mL,摇匀后分装到2 mL安瓿瓶内共460瓶,每瓶为1 mL,保持低温迅速封口,配制过程中室温保持在(20±2)℃。采用液相色谱法进行均匀性、稳定性检验和定值结果验证。从样品中随机抽取16瓶进行均匀性检验,经F检验表明,在95%的置信区间范围内该标准物质均匀性良好;采用t检验对标准物质稳定性进行检验,标准物质在12月内稳定性良好。对该标准物质的不确定度进行了评定,研制的丙酮中除虫脲溶液标准物质定值结果为100μg/mL,相对扩展不确定度为2%(k=2)。结果表明,该标准物质均匀性与稳定性良好,量值准确,可用于日常分析检测中的方法评价和仪器校准。     

Synthesis and Characterization of Poly（butylene adipate-co-terephthalate） Catalyzed by Rare Earth Stearates

Rare earth （Nd, Y, La, Dy） stearates have been synthesized and used as single component catalysts for the polycondensation of dimethyl terephthalate, adipic acid and 1,4-butanediol for the first time preparing biodegradable poly（butylene adipate-co-terephthalate） （PBAT） with high molecular weight, The microstructures of PBAT were characterized by ^1H NMR spectra. The PBAT exhibits good mechanical properties such as high tensile strength （ca. 20 MPa） and long break elongation （〉700%）.