电子辐照改性PAN/PEO基体凝胶电解质对染料敏化太阳电池性能的提高

采用电子束（EB）对聚丙烯腈/聚氧化乙烯（PAN/PEO）凝胶电解质进行了剂量为13～260 kGy的辐照, 并对辐照改性的电解质组装的染料敏化太阳电池(DSSC)进行了性能测量。 结果表明, 改性后的DSSC的光电转化效率比改性前的高; 并且随EB辐照剂量的增加, DSSC效率先迅速增加(0～65 kGy), 然后缓慢减小(65～130 kGy)直至趋于一个平衡值(130～260 kGy)。 提升DSSC效率的最佳辐照剂量为65 kGy, 此时效率提高了约36%。 对比DSSC短路电流、 开路电压和填充因子随辐照剂量的变化, 发现DSSC效率的提高主要是由短路电流的提高引起的。 测量表明, 辐照改性后的DSSC时间稳定性得到了改善, 并且辐照剂量越高, 稳定性的改善越明显。 In this work, PAN/PEO (polyacrylonitrile/polyethylene oxide) based gel electrolyte was irradiated by electron beam (EB) with dose from 13 to 260 kGy. Then, DSSC (dye sensitized solar cell) was fabricated by the irradiated electrolyte and characterized. The results show that the efficiency of the DSSC fabricated by irradiated electrolyte is promoted comparing with DSSC fabricated by un irradiated electrolyte. And with irradiation dose increasing, the DSSC efficiency increases rapidly at first (0～65 kGy), then, drops down slowly (65～130 kGy), finally trends to a stable value (130～260 kGy). It indicates that there is an optimal irradiation dose, at which the promotion of DSSC efficiency is the highest, approximate 36%. Observed from the change of short circuit current, open circuit voltage and fill factor, short circuit current promotion by EB irradiation is found to be the main reason of DSSC performance promotion. The time stability measurement of the DSSC indicates that EB irradiation on PAN/PEO electrolyte reduces the loss of efficiency and the limiting effects become more apparent as the irradiation dose increases.     

HAP/P(MMA-St)复合微球的制备及其吸附性能

以微孔纳米羟基磷灰石（HAP）为无机载体,甲基丙烯酸甲酯（MMA）和苯乙烯（St）为聚合单体,采用悬浮聚合法制备了HAP/P(MMA-St)复合微球。研究了影响球体粒度及其分布的主要因素和微球的吸附性能。结果表明,表面活性剂用量（质量分数,下同）为1‰、MMA用量为2%,HAP用量为30%,转速为300r/min时复合微球的合格球收率最高为86.4%。当微球中HAP的含量为36.07%时,HAP/P(MMA-St)微球对牛血清蛋白的最大吸附量Qe=18.70 mg/g,比未加HAP时,增加了4.65 mg/g。     

Electronic and Optical Properties of Rock-Salt AIN under High Pressure via First-Principles Analysis

Electronic and optical properties of rock-salt AIN under high pressure are investigated by first -principles method based on the plane-wave basis set. Analysis of band structures suggests that the rock-salt AIN has an indirect gap of 4.53 eV, which is in good agreement with other results. By investigating the effects of pressure on the energy gap, the different movement of conduction band at X point below and above 22.5 GPa is predicted. The optical properties including dielectric function, absorption, reflectivity, and refractive index are also calculated and analyzed. It is found that the rock-salt AIN is transparent from the partially ultra-violet to the visible light area and hardly does the transparence affected by the pressure. Furthermore, the curve of optical spectrum will shift to high energy area （blue shift） with increasing pressure.     

冷轧低碳钢高压相变组织的透射电镜分析

 对冷轧低碳钢在高压下进行再结晶,用透射电子显微镜（TEM）分析高压相变组织,发现压力可以使再结晶晶粒细化;压力升高,具有体心立方结构的普通低碳钢可形成ε-马氏体,并根据电子衍射花样的计算确定ε-马氏体的晶格参数。     

Theoretical Calculations for Structural, Elastic and Thermodynamic Properties of MgB2 under High Pressure

We have investigated the structural and elastic properties of MgB₂ under high pressures using the full-potential linearized muffin-tin orbital (FP-LMTO) scheme within the generalized gradient approximation correction (GGA) in the frame of density functional theory. The calculated pressure dependence of the normalized volume is in excellent agreement with the experimental results. At the same time the elastic constants and acoustic anisotropy as a function of applied pressure are presented. Through the quasi-harmonic Debye model, we also investigate the thermodynamic properties of MgB₂.     

非对易相空间三模坐标动量耦合谐振子的能谱

本文用不变本征算符方法研究非对易相空间中三模坐标动量耦合谐振子的能谱,分别得到了非耦合和坐标动量耦合两种情况下谐振子能谱的解析解,其中包括受非对易参数θ和φ影响的解λ0,1和λ1,1,以及不受非对易参数θ和φ影响的解λ0,2和λ1,2.然后,分析了两类耦合参数κ和η对三模坐标动量耦合谐振子能谱的影响.结果发现,耦合参数κ和η对λ1,1的影响是相同的,且当κ=η时,耦合系数κ和η对λ1,1是没有影响的.     

针对磁通蠕动效应的超导悬浮动力运动比较研究

针对超导-永磁悬浮系统,分别采用描述超导宏观电磁场本构关系的磁通流动模型和磁通流动与蠕动模型,定量模拟了自由悬浮于超导体上方永磁体的振动。通过比较研究说明磁通蠕动效应对超导悬浮动力运动的影响程度以及这一影响随超导临界电流密度、系统外加激励振幅和频率的变化规律。     

电厂热力计算可视化研究

1研究背景发电厂原则性热力系统是以汽轮机及其原则性回热系统为基础，考虑锅炉与汽轮机的匹配及辅助热力系统与回热系统的配合而形成的，可以细分为几个子系统：新蒸汽及再热蒸汽系统、给水回热加热及除氧器系统、补充水引人系统、轴封汽和其它废热回收系统以及热电厂的对外供热系统等［‘］。进行发电厂原则性热力计算的主要目的有：（1）确定电厂在若干工况下的热经济性指标；（2）提供全厂热力系统的主要参数；（3）为电厂各种热力设备的选型提供依据；（4）合理安排热力设备的检修。因此，无论对电厂设计部门还是运行部门，原则性热力…     

C60分子石墨化的研究

测量了不同激光功率照射下，在具有不同导热率的三种衬底上蒸镀膜所吸附的Ｃ６０分子的振动光谱。发现在激光功率达到８００ｍＷ时，Ｃ６０分子发生“石墨子”。对石墨化的起因做了定性分析。     

具时滞的非自治的两种群捕食者-食饵缀块系统的持久性

研究了具时滞的非自治的两种群捕食者－食饵缀块系统的持久性，建立了新的判据。