~(13)C-NMR STUDY ON THE CHAIN TERMINAL STRUCTURE OF POLY-1,3-PENTADIENE POLYMERIZED WITH RARE EARTH CATALYST

The sequence distribution and the terminal structures of poly-1,3-pentadiene chains obtained by rare earth catalyst and effect of polymerization temperature on microstructure of the polymer have been investigated by ~(13)C-NMR method. According to experimental results it was supposed that terminal active growing chain of the polymer would be four types of anti- and syn-η~3-allyl structures. When polymerization temperature was reduced, the content of cis-1,4-poly-1,3-pcntadiene increases. It can be explained by isomerization between anti- and syn-η~3-allyl. The process forming trans-1,2 unit instead of 3,4-unit were also described.     

Reactivity Ratios of Diethyldiallylammonium Chloride with Acrylamide or Acrylic Acid

The compositions of copolymers of diethyldiallylammonium chloride (DEDAAC) with acrylamide (AM), acrylic acid (AA) or sodium acrylic acid (NaAA) at low conversion were determined by elemental analysis, and the reactivity ratios of monomers in copolymerization were obtained by Kelen-Tudos method. The results showed that the reactivity ratios rDE and rAM are 0.31 and 5.27 for DEDAAC with AM, rDE and rAA are 0.28 and 5.15 for DEDAAC with AA, and rDE and rNaAA are 0.40 and 3.97 for DEDAAC with NaAA, respectively. The copolymerizations for DEDAAC with AM, AA or NaAA are non-ideal copolymerization and the products are random copolymers.     

Effect of La2O3／γ—Al2O3 Catalyst on the Activation of CH4 and CO2 to C2 Hydrocarbons under Non—equilibrium Plasma

In the reaction of methane and carbon dioxide to C2 hydrocabons under non-equilibrium plasma, methane conversion was decreased,but selectivity of C2 hydroxarbons was increased when using La2O3/γ-Al2O3 as catalyst. So the yield of C2 hydrocarbons was higher than using plasma alone. The synergism of La2O3/γ-Al2O3 and plasma gave methane conversion of 24.9% and C2 yield of 18.1%. The distribution of C2 hydrocarbons changed when Pd-La2O3/γ-Al2O3 was used as catalyst,the major C2 product was ethylene.     

An Interesting Approach to Bis-calix[5]arene Analogue from Calix[6]arene

Calix [n] arenas {n = 4, 6 or 8} are easily prepared from formaldehyde and para-substituted phenols via cyclic condensation under alkaline conditions in one step. It is not surprising that the calyx [n] arene (n = 4, 6, 8) chemistry has been developing very rapidly during the latest 20 years1. However, it is not the case for calixarenes with odd benzene rings (for example, n = 5). The yield of p-tert-butylcalix [5] arene synthesized in one-step from p-tert-butylphenol and formaldehyde was a…     

Theory on the molecular characteristic contour (II)--Molecular intrinsic characteristic contours of several typical organic molecules

The molecular intrinsic characteristic contour (MICC) is defined based on the classical turning point of electron movement in a molecule. Three typical organic molecules, I.e. Methane, methanol and formic acid, were employed as examples for detailed introduction of our method. Investigations on the cross-sections of MICC provide important information about atomic size changing in the process of forming molecules. The electron density distributions on the MICCs of these molecules were calculated and shown for the first time. Results showed that the electron density distribution on the MICC correlates closely with molecular chemical properties, and it provides a new insight into molecular boundary.     

水淬渣-累托石颗粒吸附材料的制备及应用

研究了水淬渣-累托石颗粒吸附材料制备工艺条件、再生方法及其去除铜冶炼工业废水中重金属的条件.试验结果表明,累托石与水淬渣的比例为1∶1,另加入10%的添加剂(IS)和50%的水,焙烧温度为400℃时,制成的颗粒吸附材料体积密度为1.06kg/m3,显气孔率为62.29%,吸水率为58.82%,抗压强度为2.22Mpa,吸附效果好,散失率较低.在未调节铜冶炼工业废水pH值的条件下,颗粒吸附材料用量为0.05g/cm3,反应时间为40min,吸附温度为25℃(常温)时,Cu2 、Pb2 、Zn2 、Cd2 、Ni2 的去除率分别为98.2%、96.3%、78.6%、86.2%、64.2%,处理后的水符合国家污水综合排放标准(GB8978-1996)一级标准.颗粒吸附材料对Zn2 、Cu2 有很好的选择性.吸附饱和的颗粒吸附材料用1mol/L氯化钠溶液再生效果好.该颗粒吸附材料具有分离容易、可重复使用、处理效果好、应用前景广阔的优点.     

弱色散非线性波动方程的孤波解和Jacobi椭圆函数解

应用影射法解传输线中弱色散非线性波动方程,得到了孤波解和Jacobi椭圆函数解,并用Matlab绘图加以说明.     

玉米赤霉醇酶标抗原的制备及其直接和间接竞争ELISA检测方法的建立与比较

采用活性酯法将半抗原玉米赤霉醇-16-羧丙基醚与辣根过氧化物酶连接,制备了三种结合比的酶标抗原。通过紫外吸收法和直接非竞争ELISA法对酶标抗原的偶联结果和抗原性进行鉴定。最终选择结合比为1.3∶1的酶标抗原建立直接竞争ELISA检测方法。并对建立的直接竞争ELISA(DC-ELISA)与间接竞争ELISA(IC-ELISA)方法在检出限、检测线性范围、检测时间和二抗的使用方面进行了比较。     

阿霉素在氧化铟锡电极上的电化学行为及其应用

阿霉素(ADM)在0.02 mol/L pH 7.50的NaH2PO4-Na2HPO4缓冲溶液中,用氧化铟锡(ITO)电极进行线性扫描伏安法测定,得到一良好的还原峰,其峰电位为-0.63 V。峰电流与ADM浓度在1.0×10-7~5.0×10-6mol/L范围内呈线性关系,检出限为5.0×10-8mol/L。用循环伏安法研究了体系的电化学行为及电极反应机理。实验表明,该体系属两电子还原的不可逆过程。     

SC-ICP-MS法测定金属元素的方法研究

为了使用单细胞电感耦合等离子体质谱(SC-ICP-MS)方法准确测定单个细胞中的铬(Cr)、锰(Mn)、铁(Fe)、铜(Cu)和锌(Zn)等多种内源性金属元素,该文基于动态反应池(DRC)模式对目标分析物的反应气流量和极杆抑制参数q(RPq)进行了优化,并研究了进样速度、细胞密度、驻留时间等因素对SC-ICP-MS检测...