Determining the wax content of crude oils by using differential scanning calorimetry

By the use of differential scanning calorimetry (DSC), a new method to measure the wax content of crude oil has been developed. In this paper, the wax content of a crude oil is proposed and proved to be the Q (total thermal effect of wax precipitation in sample) ratio of the crude oil and its corresponding wax obtained by using standard acetone method, i.e. Q_oil/Q_wax. For the 14 studied crude oils with the wax content ranging from 1 to 27 wt.%, the wax contents determined by the presented method are in good agreement with those determined by standard acetone method, with an absolute average deviation of only 0.82 wt.%. This method has an advantage over reported DSC methods in which the exact dissolution or precipitation enthalpy of wax is a must. It is also found that the wax contents determined by either of the two methods show good linear relationship with the total thermal effect Q_oil, with the correlation coefficients over 0.96. According to the empirical correlations, the wax content of a crude oil can be easily determined by using the DSC total thermal effect Q_oil. In addition and more significantly, the new method can be applied to improve the accuracy in determining the amount of precipitated wax in a waxy crude oil at different temperatures.     

An organic-phase optical phenol biosensor coupling enzymatic oxidation with chemical reduction

This paper presents a recycle amplification optical biosensor to monitor phenol in hydrophobic organic solvents. Tyrosinase was first immobilised by entrapping it in a copolymer membrane of poly(vinyl alcohol)-hydroxyethyl carboxymethylcellulose doped with octadecylsilica particles. The biosensor was then constructed by co-mixing small particles of the immobilised tyrosinase with the adduct of L-ascorbic acid-poly(vinyl alcohol) (AsA-PVA) in conjunction with an optical oxygen transducer. The biosensor was characterised by its amplifying response to phenol, stable biocatalytic activity of entrapped-tyrosinase, free of interference from o-quinone polymerisation, and large water buffer capacity in hydrophobic organic solvents. The working range of the biosensor to phenol was 0.08-40 mmol dm(-3) in the flow mode. The response times (95%) of the biosensor were 4-7 min for phenol. The operational lifetime was more than 40 assays and the shelf lifetime of the biosensor was longer than 3 months. The biosensor has been successfully applied to quantify the phenol contents in some commercial ointment samples.     

Enzyme inhibitors as chemical tools to study enzyme catalysis: rational design, synthesis, and applications

Carefully designed molecules that are intimately related to the reaction mechanism of enzymes are often highly selective and potent inhibitors that serve as extremely useful chemical probes for understanding the reaction mechanism and structure of enzymes. This article describes the design, synthesis, and applications of specific inhibitors of two mechanistically distinct groups of enzymes, ATP-dependent amide ligases and Ser- and Thr-hydrolases. Our strategy is based on the premise that stable analogues of the transition state (transition-state analogues) are highly potent inhibitors that serve as good mechanistic probes, and that a key structure of a good inhibitor of one enzyme is also utilized for the inhibitors of other enzymes that share the same chemistry in their catalyzed reactions, irrespective of the degree of structural similarity and evolutionary link between the enzymes. According to these principles, we designed and synthesized a series of phosphinate- and sulfoximine-based transition-state analogue inhibitors of glutathione synthetase, gamma-glutamylcysteine synthetase and asparagine synthetase. For the second group of enzymes, we synthesized a gamma-monofluorophosphono glutamate analogue for mechanism-based affinity labeling of gamma-glutamyltranspeptidase and fluorescent phosphonic acid esters for the active-site titration of lipase. These inhibitors were used successfully as ligands for detailed kinetic analyses, X-ray crystallography, and mass analysis of the enzymes to identify the key amino acid residues responsible for catalysis and substrate recognition in the transition state.     

Luminescence 3D-ordered porous materials composed of CdSe and CdTe nanocrystals

The luminescence porous materials of CdTe or CdSe nanocrystals (NCs) were prepared by filling the corresponding NCs into the voids of colloidal crystal by co-deposition of polymer beads and NCs. After removing the beads with tetrahydrofuran (THF), the 3D-ordered porous materials of CdTe (or CdSe) NCs were obtained. The wavelength of maximum photoluminescence of the NCs porous material shows obvious red shift compared with their aqueous dispersion. Under the excitation of high-energy electron the porous materials of CdTe and CdSe NCs will emit photons that can be collected to form a cathode luminescence (CL) image.     

氯化钙/水-醇溶液稀释热

电解质溶液稀释热是溶液的重要热性质之一．由它可计算不同浓度下电解质的溶解热、表现相对摩尔焓、溶液中反应热和化合物生成热等．在电解质溶液理论研究中，稀释热也是重要的基础数据．由稀释热可推算溶液中组分的活度系数、渗透系数、相对偏摩尔焓及表观摩尔热容等[1-3]．在化工生产中，稀释热是化工过程能量计算不可缺少的数据．电解质水溶液稀释热已有不少研究[2，4]．但电解质混合溶剂体系稀释热报导甚少．随着加盐精馏技术、海水淡化技术等研究的进展，急需这方面数据．本文作者已报告了CaCl2／C2H5OH－H2O体系[5]和CaCl2／n－C…     

铝镓取代的钨硅杂多配合物位置异构体的合成表征及催化性能

合成了通式为Ｋ５－ｎＨｎ［α－，βｉ－ＳｉＷ１１Ｍ（Ｈ２Ｏ）Ｏ３９］·ｘＨ２Ｏ（Ｍ＝Ａｌ，Ｇａ，βｉ＝β１，β２，β３）的八种异构体。通过元素分析、红外光谱和紫外光谱、极谱和循环伏安、２７Ａｌ和１８３Ｗ核磁共振、Ｘ光电子能谱等方法进行了表征。所合成的各异构体在催化以Ｈ２Ｏ２为氧化剂的顺丁烯二酸环氧化反应中，β３异构体具有最高的催化活性     

周岁内幼儿头发中锌钙含量的动态分析

对合肥市16671名1－12个月幼儿的发锌，钙含量进行了测定，并对测定值进行了统计分析。结果表明，锌，钙的含量随着月龄的增加呈直线递减。并给出了发锌，钙含量的趋势线方程，丰富了目前文献给出的发锌，钙的标准值，为及时准确判断周岁内幼儿微量元素锌，钙缺乏程度提出依据。     

Heteroallen-komplexe des molybdänocens

Reactions of the extremely labile molybdenocene olefin complexe Mo(η⁵-C₅H₅)₂[(Z)-C₆H₅CH=CHC₆H₅] with heteroallenes X=C=Y (X=C=Y = CS₂, (p-tolyl)NCN(p-tolyl), (C₆H₅)₂CCO) gives the corresponding heteroallene complexes of molybdenocene Mo(η⁵-C₅H₅)₂(X=C=Y) in high yields. Spectroscopic data clearly indicate a dihapto-coordination of the heteroallenes via the C=X bond (X = O, S, N).     

A boundary element method for molecular electrostatics with electrolyte effects

A boundary element method is developed to compute the electrostatic potential inside and around molecules in an electrolyte solution. A set of boundary integral equations are derived based on the integral formulations of the Poisson equation and the linearized Poisson-Boltzmann equation. The boundary integral equations are then solved numerically after discretizing the molecular surface into a number of flat triangular elements. The method is applied to a spherical molecule for which analytical solutions are available. Use is made of both constant and linearly varying unknowns over the boundary elements, and the method is tested for various values of parameters such as the dielectric constant of the molecule, ionic strength, and the location of the interior point charge. The use of the boundary integral method incorporating the nonlinear Poisson-Boltzmann equation is also briefly discussed.     

Kinetic investigation of the textile bleaching process

Volumetric H₂-uptake measurements on an Mo₂N (79 m²g^–1) sample reduced at 673 K have been carried out and the uptake isotherms in the temperature range of 308–623 K have been determined. Both the total and reversible hydrogen uptake increased with the uptake temperature. The irreversible hydrogen uptake increased abruptly when the uptake temperature was raised up to 423 K. The maximum of irreversible hydrogen uptake was measured at 473 K. The H_IR/Mo ratio calculated from the uptakes obtained in the temperature range of 308–623 K varies in the range of 0.0010–0.0202. One possible mechanism for hydrogen adsorption is proposed to be heterolytic dissociation on Mo-N paris, in which the molybdenum atoms are in unsaturated coordination.