反向流动注射化学发光法测定痕量铁

基于邻菲别名林对高碘酸钾－碱性鲁米诺－铁体系发光强度的增敏作用建立了水体中总铁的反向流动性化学发光检测方法。该法线性范围在１×１０＾－４－１０ｍｇ／Ｌ，检测限为３×１０＾－６ｍｇ／Ｌ，对于５×１０＾－３ｍｇ／Ｌ Ｆｅ测定９次的相对标准偏差为０．９％。此方法已用在水处理中总铁的监测。     

Temperature-programmed desorption and adsorption of hydrogen on Mo2N

Hydrogen adsorption-desorption over Mo₂N has been studied using a temperature-programmed technique. It is revealed that hydrogen on Mo₂N exhibits very high mobility leading to migration of the surface hydrogen into the sublayer and bulk of the sample or the reverse. The surface hydrogen species are preferentially formed when adsorption is carried out below 573 K. On increasing the adsorption temperature to above 573 K, the quantity of hydrogen species located in the sublayer or/and bulk of the Mo₂N sample increases significantly.     

溶胶-凝胶法制备还原态K-Co-Mo催化剂的合成醇性能

应用溶胶-凝胶法制备了还原态K-Co-Mo催化剂, 比较了不同的组分和不同的反应条件对合成醇性能的影响。实验结果表明，适量钾和钴助剂的添加能显著提高催化剂合成醇的性能，尤其是提高了C2+醇的选择性。此外，反应温度、压力以及空速对合成醇影响明显，升高温度可以提高催化反应中低碳醇的收率，但选择性下降；增加压力和空速可以提高低碳醇的收率和选择性，对合成低碳醇有利。在230 ℃，6.0 MPa，14 400 h－1条件下，催化剂合成低碳醇的收率为375.4 g/kg·h，选择性为70.2%，C1OH/C2+OH为0.48。     

提高非贵金属临氢脱腊催化剂异构化能力的研究

通过水热条件下合成分子筛试验条件的考察,获得了合成条件和性能良好的ZSM-8分子筛。采用无定形硅铝和ZSM-8分子筛制备出复合载体型的非贵金属临氢脱腊催化剂,通过锌和钨改性组分的添加,提高现有工业催化剂的异构化能力。实验结果表明,不同复合载体、改性组分对催化性能有较大影响,但改性组分的添加次序无明显作用。与以前β沸石基催化剂性能相比,ZSM-8基催化剂不仅提高了润滑油收率,而且产品润滑油的粘度指数也明显提高。催化性能的改进可以归结为改性后催化剂异构化能力的提高。     

Development of new solid-phase microextraction fibers by sol-gel technology for the determination of organophosphorus pesticide multiresidues in food

Allyloxy bisbenzo 16-crown-5 trimethoxysilane was first used as precursor to prepare the sol-gel-derived bisbenzo crown ether/hydroxyl-terminated silicone oil (OH-TSO) SPME coating. The coating procedure involving sol solution composition and conditioning process was presented. Compared with commercial SPME stationary phases, the new coatings showed higher extraction efficiency and therefore could provide higher sensitivity for organphosphorous pesticides (OPs). Limits of detection (LODs) were in the range of 0.003-1.0 ng/g for these OPs in food samples (honey, juice, orange and pakchoi). The optimal extraction conditions of the new coatings to OPs in these samples were investigated by adjusting extraction time, salt addition, extraction temperature, and dilution ratios of samples with distilled water by using SPME coupled with gas chromatography (GC)-flame photometric detection (FPD). The method was applied to determine the concentrations of OPs in real samples.     

高富勒烯的提取,分离和分析

采用二硫化碳重结晶富勒烯混合物或二硫化碳二次抽提烟灰以提取高富勒烯（ｈｉｇｈｅｒｆｕｌｅｒｅｎｅｓ，Ｃｎ，ｎ＞７０）。产物经高效液相色谱分析，高富勒烯的含量从１％分别提高到４％和６％；经激光飞行时间质谱证明，产物中除含主要成分Ｃ６０和Ｃ７０以外，还含有Ｃ７６、Ｃ７８、Ｃ８２、Ｃ８４以及更高碳原子的富勒烯。     

新型含氟聚芳醚酮的合成与表征

聚芳醚酮具有很高的热稳定性和优良的电性能及机械性能 ,已经被广泛应用于宇航、电子及核能等高技术领域 [1] .氟元素的引入可以降低材料介电常数、折光指数和吸水率 ,提高热稳定性、溶解性和阻燃性 ,增加材料透明度 ,使这类聚合物在光电子、光学和微电子等应用领域的研究倍受关注 [2～ 4 ] .本文在合成含三氟甲基苯侧基的聚芳醚酮 [5] 的基础上 ,设计并合成了新型的含氟量更高的单体和聚合物 ,并对其性能进行了初步研究 .1　实验部分1 .1　试剂与仪器　 [3,5 -二 (三氟甲基 ) ]苯代对苯醌 (自制 ) ;锌粉 ,A.R.级 ,天津化学试剂一厂产品 ;…     

Supramolecular assemblies of a naturally derived sophorolipid

Acidic sophorolipid (SL) molecules derived from yeasts represent a novel type of asymmetrical bolaamphiphiles due to their unique structural features that include an asymmetrical polar head size (disaccharide vs COOH), a kinked hydrophobic core (cis-9-octadecenoic chain), and a non-amide polar-nonpolar linkage. Light microscopy, small- and wide-angle X-ray scattering, FT-IR spectroscopy, and dynamic laser light scattering were used to investigate the supramolecular structures of the self-assembled aggregates of SL molecules at different pH values. In acidic conditions (pH < 5.5), giant twisted and helical ribbons of 5-11 microm width and several hundreds of micrometers length were observed for the first time. Increase in solution pH values slowed ribbon formation, decreased ribbon yield, and increased the helicity and entanglements of the giant ribbons. An interdigitated lamellar packing model of acidic SL-COOH molecules with a long period of 2.78 nm, stabilized by both the strong hydrophobic association between the cis-9-octadecenoic chains and strong disaccharide-disaccharide hydrogen bonding, is proposed. The neutralization of SL-COOH in water to SL-COONa produced clear solutions with the formation of short-range ordered aggregates. At concentrations below 1.0 mg/mL, the size of self-assembled aggregates increased as the concentration increased. At concentrations above 1.0 mg/mL, narrowly distributed micellar aggregates with a constant hydrodynamic radius (R(h)) of about 100 nm are formed. The large micelles show strong angular dependence with the fast mode appearing at scattering angle theta >/= 60 degrees.     

Reduction of Secondary Carboxamides to Imines

This article reports in detail on the discovery that zirconium(IV) salts of secondary amides and lactams are transformed by Cp(2)ZrHCl to N-substituted imines in one step. The method represents the first controlled reduction of amides and lactams to the corresponding imines, a transformation that is otherwise very difficult to achieve because imines are reduced more rapidly than carboxamides by most metal hydride reagents. No products of reductive cleavage of the carboxamides are observed. Efforts to replace 2 mol equiv of Cp(2)ZrHCl with simpler, less costly alternatives led to the finding that a diisobutylaluminum enolate can be substituted for the initial zirconium enolate. Such aluminum amides are smoothly reduced to the corresponding imine using Cp(2)ZrHCl in good yield. Moreover, aluminum amides are also reduced to imines using either low-valent titanium species or triethylsilane. In these alternative procedures, use of Cp(2)ZrHCl is eliminated altogether in the title transformation.     

Self-assembled hybrid nanofibers confer a magnetorheological supramolecular hydrogel

Most magnetorheological materials, composed of magnetic microparticles in a liquid, require significant amounts of magnetic particles and a large magnetic field to achieve the desired effects. Here, we report on a new type of magnetorheological materials consisting of small amounts of magnetic nanoparticles (0.8 wt %) but exhibiting large rheological change (i.e., a gel-sol transition) upon the application of a small magnetic field. We use self-assembly to create hybrid nanofibers, which consist of supramolecular hydrogelators and magnetic nanoparticles, as the matrices of the hydrogel. Localized in the nanofibers at a distance of 1-2 nm, the magnetic nanoparticles occupy a small volume fraction of the hydrogel, significantly enhancing the magnetic dipole interactions between them, which results in the large magnetoresponse. This strategy generates a hierarchical nanostructure and eliminates several drawbacks of the simple mixture of polymers with nanoparticles, and thus provides a new methodology that uses magnetic force to control the nanostructures and properties of soft materials.