A six-minute determination of carbon and hydrogen with titrimetric finish

Summary A method is described for the C/H determination with a completely titrimetric finish. Both carbon and hydrogen are converted to an equivalent amount of carbon dioxide, which is titrated in a non-aquous medium. The procedure can be applied for the analysis of substances separated by a gas Chromatograph. The determination takes about six minutes.

---

Zusammenfassung Ein Verfahren zur C-H-Bestimmung wird beschrieben, bei dem die Endbestimmung volumetrisch erfolgt. Hierbei werden sowohl Kohlenstoff als auch Wasserstoff in äquivalente Mengen Kohlendioxid übergeführt und dieses durch Titration in nichtwäßrigem Medium erfaßt. Die Methode kann auch für die Analyse gaschromatographisch getrennter Substanzen benutzt werden. Eine Bestimmung ist innerhalb von 6 min beendet.

     

Potassium addition to Fe/MgO, Ni/MgO and Ni/SiO2: Reducibility, dispersity and stabilization of the promoter by the support

The influence of potassium addition on the morphological properties of Fe/MgO and Ni/MgO has been investigated: KNO₃ addition to precursors results in a decrease of the reducibility and in a smaller dispersity of the metallic phase. A loss of potassium is observed at reduction temperatures in excess of 773 K. Silica-supported Ni behaves differently: silica inhibits the potassium volatilization and nickel reducibility is enhanced. This illustrates how promoter effects can be influenced by the nature of support.

---

Fe/MgO Ni/MgO: KNO₃ . , 773 K. , : . .

     

Triterpene glycosides of Acanthophyllum gypsophiloides IV. The structure of acanthophyllosides B and C

Summary Alternative structures for the acyloside chain of acanthophylloside B and C have been established.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 728–734, November–December, 1975.     

基于非生物折叠体的分子识别

利用分子自组装的方法控制大分子量的线性有机分子的构象是物理有机化学一个富于挑战性的研究课题. 近年来, 化学家已经成功利用不同的分子内非共价键作用力如氢键和疏溶剂作用等诱导线性分子的折叠乃至螺旋构象的产生. 综述了近年来这种新的非生物二级结构形式在分子识别研究中的应用.     

卟啉作为信号传递介质的紫外可见光谱研究

合成了6种氨基酸水杨醛席夫碱(Sal-AA)：Sal-Gly(甘氨酸)、Sal-Phe(苯丙氨酸)、Sal-Arg(精氨酸)、Sal-Tyr(酪氨酸)、Sal-Met(甲硫氨酸)、Sal-Glu(谷氨酸)及其金属铜配合物。并分别在2种不同介质(三氯甲烷和甲醇)中，与四苯基卟啉TPP进行反应，研究了其紫外可见光谱性质，讨论了卟啉作为人工信号转导体系的传递介质，与氨基酸水杨醛席夫碱铜配合物的反应中，实现信号分子铜离子进一步传递的可能性以及溶剂对该信号传递的影响。结果表明，在三氯甲烷为溶剂时，除了Sal-Met的铜配合物之外，其余均能被TPP夺取而形成Metal TPP。而在以甲醇为溶剂时，只有Sal-Gly的铜配合物能被TPP所夺取。     

牛血清白蛋白在NVP/HEMA无规共聚物水凝胶上的吸附研究

合成了不同含水量的N-乙烯吡咯烷酮(NVP)／甲基丙烯酸-β-羟乙酯(HEMA)共聚物水凝胶．研究了温度、pH值，蛋白质初浓度及离子强度等因素对牛血清白蛋白吸附性能的影响．采用紫外分光光度法测定BSA的吸附量．结果表明，蛋白质初浓度越高．温度越高，离子强度越大；蛋白质内部更多的疏水性氧基酸残基暴露于外部．吸附量增加：在等电点pH=4．7附近蛋白质沉积量最大．     

On the origin of geminal regioselectivity in the ene reaction of singlet oxygen with substituted alkenes

The geminal regioselectivity observed in the ene reaction between singlet oxygen and alkenes with anion-stabilizing groups is rationalized on the basis of a perepoxide intermediate, in which in analogy to the nucleophilic attack on protonated epoxides, the perepoxide is opened preferentially at the C---O bond weakened by the substituent.     

Calibration model of simultaneous multielement atomic-emission analysis using analytical line groups of each determined element

A calibration model of multielement methods for simultaneous determination of micro- and macro-concentrations of elements by computing the arc atomic-emission spectra has been developed. A calibration procedure for the analytical line group of the elements to be determined is offered. It allows the lower and upper limits of the concentration range for each line of the determined element to be calculated by means of the least-square method (LSM) and the Weibull distribution law is used to extend the concentration region. The calibration model was successfully tested for different arc optical emission spectroscopy (OES) methods. Received: 17 June 1997 / Revised: 3 November 1997 / Accepted: 7 November 1997     

X-ray studies of supported copper-aluminium catalysts

Structural peculiarities of the formation of copper-aluminium catalysts at copper concentrations <10 wt% and calcination temperatures of 573–1173 K have been studied.

---

<10% . 573–1173°K.

     

WxC-MCM-48催化剂的合成、表征及加氢脱硫催化性能

以正硅酸乙酯(TEOS)为硅源，十六烷基三甲基溴化铵(CTAB)为表面活性剂，仲钨酸铵为钨源，采用水热晶化法一步合成了不同钨含量(以Si、W物质的量比n_Si/n_W表示)的WO₃-MCM-48，然后经甲烷/氢气(V/V=1/4)混和气体程序升温还原碳化(TPC)，制备出了W_xC-MCM-48(x=1、2)催化剂，采用XRD、N₂吸附-脱附和NH₃-TPD对样品的结构进行了表征，用噻吩作为模型化合物，对W_xC-MCM-48催化剂的加氢脱硫催化活性进行了评价。结果表明，在一定钨含量的条件下，WO₃-MCM-48和W_xC-MCM-48样品仍然保持MCM-48的三维立方有序介孔结构，n_Si/n_W=30～15时，碳化钨的物相为W₂C；n_Si/n_W=7.5时，碳化钨为W₂C和WC物相，W_xC-MCM-48催化剂表现出了良好的加氢脱硫催化性能。