Analysis of beam quality for the laser beams after spectral beam combining

The beam quality of the laser beams after spectral beam combining (SBC) has been analyzed in this paper. Based on the propagation model of the spectral beam combining system, the expression for the output field of an individual beam passing through the spectral beam combining system with lens aberration has been given and the intensity distribution of the combined beam has been studied by the principle of incoherent superposition. Consequently, according to the intensity second-order moments method, the M²-factor of the combined beam has been calculated and the effect of lens aberration on the characteristics of the combined beam has been analyzed quantitatively. It can be shown that the SBC system can improve the beam quality of laser array significantly, and the M²-factor of the combined beam passing through the ideal spectral beam combining system is almost the same as that of an individual beam. For the spectral beam combining system with lens aberration, the spherical aberration has greater effect on the off-axis beam than on the on-axis beam, and the beam quality of combined beam degrades with increase in lens aberration.     

Investigation on cell biocompatible behaviors of polyaniline film fabricated via electroless surface polymerization

Considering for the potential application in tissue engineering, polyaniline (PANi) film was fabricated via a two-step route: a self-assembled monolayer of C₆H₅NHC₃H₆Si(OMe)₃ was firstly formed on the single-crystal Si substrate; the conducting PANi film was then prepared through electroless surface polymerization of the aniline molecules on the aniline monolayer-bearing silane surface in an acidic aqueous solution. The formation of PANi film on Si surface was confirmed by characterizations of X-ray photoelectron spectroscope (XPS) and specular reflectance Fourier transform infrared (SR-FTIR) spectrum, etc. At last, the proliferation behaviors of PC-12 cells on the PANi film surface were studied by the [3-(4,5-dimethyldiazol-2-yl)-2,5-diphenyl tetrazolium bromide] (MTT) colorimetric assays, acridine orange fluorometric staining, and scanning electron microscope (SEM) observation, etc. The results demonstrate that the as-prepared PANi film provides high ability for cell proliferation, exhibiting promising potentials as surface coating to cultivate neuronal cells for applications in the tissue engineering.     

刮擦“全息”的实验探索及理论分析

基于刮擦全息理论,由模拟仿真得出图像畸变与半径R的变化规律,通过具体实验,证实了刮擦"全息"仅是基于光反射原理的"全息"图,是一种伪全息。     

激基复合物给体作间隔层对激子复合区域的调节

为研究激基复合物器件激子复合区域的变化,在TPD/BPhen界面可形成激基复合物发光的基础上,以Ir(pq)2(acac)为探测层,制备器件ITO/Mo O_3(2.5 nm)/TPD((40-x)nm)/Ir(pq)2(acac)(0.5 nm)/TPD(x,x=0,3,6,10 nm)/BPhen(40 nm)/Cs2CO_3/Al,其中靠近BPhen的TPD称之为间隔层。电致发光光谱表明,该组器件的激子复合区域主要位于Ir(pq)2(acac)薄层和TPD/BPhen界面,分别发射595 nm和478 nm的光。随着TPD间隔层厚度的增加和电压的升高,发光区域向激基复合物区域(TPD/BPhen界面)移动,即更多的电子和空穴在TPD/BPhen界面形成激基复合物发光,Ir(pq)2(acac)发光减弱。当间隔层厚度由0 nm增至10nm时,6 V电压下的Ir(pq)2(acac)和激基复合物发光强度的比值由44降至1.5。对于间隔层厚度为6 nm的器件,Ir(pq)2(acac)和激基复合物发光强度的比值由6 V时的2.8降至10 V时的1.0。由此可见,激基复合物给体作间隔层能有效调节激子复合区域。     

绿肥对华北潮土土壤可溶性有机物的影响

在华北潮土上种植不同绿肥,于绿肥翻压前原位采集其地上部及土壤样品,进行56d的绿肥翻压模拟试验。设毛叶苕子(Vicia villosa Roth.)、二月兰(Orychophragmus Violaceus L.)、黑麦(Secale cereale L.)三个绿肥处理和无绿肥对照处理,分析培养过程中土壤可溶性有机物(DOM)组分及其紫外-可见光谱参数的变化,以探究绿肥对土壤DOM的影响。种植和翻压绿肥增加土壤可溶性有机碳(DOC)、总有机酸碳(TOAs)和总碳水化合物碳(TCs)含量,三者的变化趋势一致,各处理均在培养第1 d上升至峰值后迅速下降。毛叶苕子提高DOC和TOAs的效果最好,最高比对照增加114.01%(培养第1d)和109.10%(培养第14 d)。黑麦提高TCs的效果最好,最高比对照增加323.18%(培养第42 d)。种植和翻压绿肥增加土壤可溶性有机氮(DON)含量,与DOC变化趋势不同,各处理在培养第1 d上升后迅速下降一段时间后又迅速上升。毛叶苕子提高DON的效果最好,最高比对照增加305.83%(培养第42d)。绿肥增加了SUVA₂₅₄,SUVA₂₆₀,SUVA₂₇₂,SUVA₂₈₀,SAUC_240-400,降低了A₂₅₀/A₃₆₅和A₂₄₀/A₄₂₀。紫外-可见光谱参数的主成分分析显示SUVA₂₅₄,SUVA₂₆₀,SUVA₂₇₂,SUVA₂₈₀间有很高正相关性,A₂₅₀/A₃₆₅和A₂₄₀/A₄₂₀间亦有很高正相关性,SAUC_240-400是这些参数中表征DOM性质的关键因子。综上结果表明,种植翻压绿肥增加了土壤DOM含量,提高了土壤DOM的芳香性、疏水性、腐殖化程度、平均分子量,增加了土壤DOM的稳定性。     

紫杉醇水凝胶成胶因子延缓微管蛋白聚集

Paclitaxel (PTX) is one of the most efficient anticancer drugs for the treatment of cancers through β-tubulin-binding. Our previous work indicated that a PTX-derivative hydroge-lator Fmoc-Phe-Phe-Lys(paclitaxel)-Tyr(H₂PO₃)-OH (1)could promote neuron branching but the underlying mechanism remains unclear. Using tubulin assembly-disassembly assay, in this work, we found that compound 1 obviously delayed more microtubule aggregation than PTX did. Under the catalysis of alkaline phosphatase, Fmoc-Phe-Phe-Lys(paclitaxel)-Tyr(H₂PO₃)-OH could self-assemble into nanofiber Fmoc-Phe-Phe-Lys(paclitaxel)-Tyr-OH with width comparable to the size of αβ-tubulin dimer. Therefore, we proposed in this work that nanofiber Fmoc-Phe-Phe-Lys(paclitaxel)-Tyr-OH not only inhibits the αβ-tubulin dimer binding to each other but also interferes with the plus end aggregation of microtubule. This work provides a new mechanism of the inhibition of microtubule formation by a PTX-derivative hydrogelator.     

红外图像的疲劳状态识别方法

目的：为了解决光照变化对疲劳检测系统造成的准确性不高的问题,提出了一种近红外环境下判断人眼状态的方法,即针对红外光补图像的人眼状态判断。方法：首先,利用Adaboost算法对人眼区域进行定位,在网格法标记人眼瞳孔部分的基础上,进行Retinex红外图像增强。接着,对二值化与边缘检测后的红外图像分别进行网格法闭合度计算,得到人眼闭合度。最后,根据闭合度计算结果设定双阈值并结合PERCLOS来判断眼睛状态。结果：在DM642硬件平台上进行疲劳检测试验,实验结果表明,人眼状态识别率达到了90%以上,且平均每秒能处理21帧图片。结论：证明了该方法不仅能有效解决光照变化带来的问题,而且满足疲劳状态检测系统的快速性、可靠性和有效性等要求。     

基于VxWorks新型映像的三模冗余启动机制研究

针对VxWorks启动映像依赖于ROM地址,不能适应航天型号中三模存储要求的缺点,利用VxWorks自带的压缩算法,按照航天型号软件任务要求设计了一种基于VxWorks内存型映像的新型压缩映像,实现了软件映像与ROM区地址无关。并且实现了新型压缩映像的三模冗余引导启动,启动时每一个bit数据都从三份映像获取,并进行三取二判断,将最后结果拷贝到内存作为目的映像的bit数据,目的映像启动后能够回写正确数据自动纠正空间环境下可能发生的单粒子翻转错误,为软件的可靠启动建立了基础。     

混合架构下ORACLE数据快速查找方法研究

为了提高对混合架构下ORACLE数据的挖掘和查找速度,提出一种基于频繁项目集关联规则挖掘的数据快速查找方法。构建ORACLE数据的内部关联属性映射关系模型,在异质网络混合构架模式下,采用Graph OLAP数据仓库模型进行数据库检索的关系维度表,提取表达ORACLE数据属性信息的特征参量,通过同态标签检索方法,实现对目标数据的快速查找定位。仿真结果表明,采用该方法进行ORACLE数据查找的查准率和查全率较高,计算速度较快,性能优于传统方法。     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.