On the Causes and Effects of Contaminations during rf Diode Deposition of Cr-Si Alloys

Investigations to the causes and effects of contaminants at the rf diode deposition of CrSi films in a non-heated high vacuum apparatus were carried out comparing an oxygen-free fusion target with an oxygen-containing cermet target. The films of the fusion target contained considerable amounts of oxygen; analogously the oxygen concentration in the films was increased in the case of the cermet target. Moreover, hydrogen was found. The concentration of the contaminants decreased with the sputtering power, however the rate of incorporation increased. For high sputtering rates the contamination process was reproducible and independent of the plant conditioning; the deposited films were depth-homogeneous. The reasons for this behaviour lie in water sources which are activated first of all by the discharge itself. The electrical properties found are explained by the contaminants and the deposition conditions.     

Molecular addressing? Studies on light-induced reorientation in liquid-crystalline side chain polymers

Polarized light leads to an effective reorientation of the optic axis in the glassy state of liquid-crystalline side chain polymers containing azobenzene mesogenic groups, via a trans-cis and cis-trans isomerization. Using a combination of U V and IR dichroitic studies it is shown for copolymers consisting of chromophores (azobenzene) and non-chromophores (phenylbenzoate) that only the chromophores are reoriented by light as far as the glassy state is concerned. Individual chromophores are thus addressed by photoselection. Photoselection in the fluid nematic state, on the other hand, leads also to a reorientation of the non-chromophores.     

A shock tube study of the reaction of methyl radicals with hydroxyl radicals

The reaction of CH₃ with OH has been studied near 1200 K and 1 atmosphere pressure in shock tube experiments in which UV absorption was used to monitor [OH]. A rate coefficient of (1.1 ± 0.3) × 10¹³ cm³/mol-s was measured for removal of OH by CH₃. This measured value is compared with previous experimental data and calculations. Several possible reaction channels are discussed, and although products were not monitored, it seems probable, on the basis of other work and theoretical estimates, that the primary mechanism (?75%) for the removal of OH by CH₃ at these conditions is their combination to form CH₃OH. Rate coefficients of (5.3 ± 0.8) × 10¹² and (9.0 ± 1.4) × 10¹² cm³/mol-s were measured for the reactions of OH with acetone and ethane, respectively, at the same temperature and pressure.     

Radioactive waste treatment using natural Syrian bentonite

The uptake of¹³⁷Cs and⁹⁰Sr/⁹⁰Y onto Syrian bentonite has been studed, using batch and column tracer techniques in order to investigate its utilization for aqueous radioactive effluent treatment. Parameters influencing the percent uptake considered and studied in this work are: nuclide concentration, pH of the aqueous phase, heat treatment and particle size. Leaching experiments using natural sea and ground waters were carried out on bentonite/cement composites. They demonstrated the effectiveness of calcination and cement containment.     

Sample preparation for chromatographic analysis of food.

Sampling, homogenisation and sample preparation prior to chromatographic injection of food analytes are designed to enhance accuracy and precision. The reduction of inherent errors introduced by these steps requires the analyst's attention as a matter of course. Methods and examples of minimising errors in each step are reviewed.     

Incremental evolution of induced anisotropy

The aim of this article is to define a model that describes the evolution of the yield surface during plasticity. We propose a modelisation that is completely different from the classical approach as far as conception is concerned. It consists of describing the yield surface evolution with the help of velocity. The yield function is not directly known but is obtained by integrating a differential law starting from an initial surface. A very simple evolution law is used; the complexity of the induced anisotropy is obtained by incremental accumulation.     

Novel optical techniques for the analysis of polymer surfaces and thin films

Summary We report on novel optical techniques, based on evanescent waves, for the characterization of polymer surfaces and thin films. We first describe photo-ablation studies with polysilane films investigated by surface plasmon microscopy, a technique which is particularly well-suited for ultrathin samples. Thicker films that are homogeneous enough to carry optical waveguide modes can be characterized with high lateral resolution by the recently developed waveguide microscopy. We demonstrate this for a thin film of a solid polyelectrolyte. Finally, we report on surface plasmon field-enhanced Raman-spectroscopic and -imaging investigations of ultrathin Langmuir-Blodgett-Kuhn-layers of cadmium arachidate.W. Hickel is now with HOECHST AG, Angewandte Physik, W-6230 Frankfurt 80