Carane amino alcohols as organocatalysts in asymmetric aldol reaction of isatin with acetone

Carane-derived β-amino alcohols with amino and hydroxy groups at positions 3 and 4 differing in their mutual arrangement and configuration were synthesized. Their application as organocatalysts in the asymmetric aldol reaction of isatin with acetone allowed one to obtain adducts with up to 84% enantiomeric excess.     

Maximizing Ion Transmission in Differential Mobility Spectrometry

We provide modeling and experimental data describing the dominant ion-loss mechanisms for differential mobility spectrometry (DMS). Ion motion is considered from the inlet region of the mobility analyzer to the DMS exit, and losses resulting from diffusion to electrode surfaces, insufficient effective gap, ion fragmentation, and fringing field effects are considered for a commercial DMS system with 1-mm gap height. It is shown that losses due to diffusion and radial oscillations can be minimized with careful consideration of residence time, electrode spacing, gas flow rate, and waveform frequency. Fragmentation effects can be minimized by limitation of the separation field. When these parameters were optimized, fringing field effects at the DMS inlet contributed the most to signal reduction. We also describe a new DMS cell configuration that improves the gas dynamics at the mobility cell inlet. The new cell provides a gas jet that decreases the residence time for ions within the fringing field region, resulting in at least twofold increase in ion signal as determined by experimental data and simulations.

Open image in new window

Graphical Abstract ?

     

Application of Atmospheric Solids Analysis Probe Mass Spectrometry (ASAP-MS) in Petroleomics: Analysis of Condensed Aromatics Standards,Crude Oil,and Paraffinic Fraction

Atmospheric solids analysis probe mass spectrometry (ASAP-MS) is a powerful tool for analysis of solid and liquid samples. It is an excellent alternative for crude oil analysis without any sample preparation step. Here, ASAP-MS in positive ion mode, ASAP(+)-MS, has been optimized for analysis of condensed aromatics (CA) standards, crude oil, and paraffinic fraction samples using a Synapt G2-S HDMS. Initially, two methodologies were used to access the chemical composition of samples: (1) using a temperature gradient varying from 150 to 600 °C at a heating rate of 150 °C min^–1, and (2) with constant temperature of 300 and 400 °C. ASAP(+)-MS ionized many compounds with a typical petroleum profile, showing a greater signals range of m/z 250–1300 and 200–1400 for crude oil and paraffin samples, respectively. Such performance, mainly related to the detection of high molecular weight compounds (>1000 Da), is superior to that of other traditional ionization sources, such as ESI, APCI, DART, and DESI. Additionally, the CA standards were identified in both forms: radicals, [M]^+?, and protonated cations, [M + H]⁺, with minimum fragmentation. Therefore, ASAP was more efficient in accessing the chemical composition of nonpolar and polar compounds. It is promising in its application with ultrahigh resolution MS instruments, such as FT-ICR MS and Orbitrap, since molecular formulas with greater resolution and mass accuracy (<1 ppm) would be assigned.

Open image in new window

Graphical Abstract ?

     

Synthesis,electrolyte properties and solar cell performance of hyperbranched poly(aryl-ether-urea)s

Hyperbranched poly(aryl-ether-urea)s with phenyl, N,N-dimethylamino ethyl and polyethylene oxide end-groups linked through urethane group – HBPEU-1, HBPEU-2 and HBPEU-3 respectively – were synthesized from an AB₂-type blocked isocyanate monomer and characterized by FT-IR, ¹H-NMR, SEC-MALLS, TGA and DSC techniques. The molecular weight of the polymers were found to be ranged from 4.9 × 10³ ? 1.96 × 10⁴ g/mol. The TGA results showed that the polymers decompose between 175°C – 220°C. In the DSC curves, HBPEU-1 and HBPEU-3 showed T_g at 160°C and 53°C respectively, whereas HBPEU-2 did not showed clear T_g. All the three polymers were converted into polymer electrolytes by doping with LiI/I₂. The doped polymers showed remarkably high ionic conductivity, up to 222 – 277 times compared to the un-doped polymers and the highest conductivity was observed with doped HBPEU-2. The TiO₂ based dye-sensitized solar cells (DSSCs) were fabricated using the doped polymer electrolytes and their performance was tested; HBPEU-2 showed good performance by yielding energy conversion efficiency (η) of 4.5%.     

Food safety assurance using methods of chemical analysis

A review of state-of-the-art methods of sample preparation and chemical analysis for the control of contaminants in foodstuffs and food raw materials is presented. The main achievements and performance characteristics of methods for the determination of pesticides and veterinary drugs, their metabolites, natural toxins, trace amounts of chemical elements, first of all toxic, allergens, food additives, and contaminants from packaging materials in foodstuffs and for the identification of falsifications by methods of chemical analysis are considered.     

Chromatographic determination of nitrophenols in aqueous media after two-stage preconcentration using an N-vinylpyrrolidone-based polymer

Two-stage procedures for the preconcentration of nitrophenols (4-nitrophenol, 2,4- and 2,5-dinitrophenol, and 2,4,6-trinitrophenol) from aqueous solutions are proposed. At the first stage, the preconcentration and desorption of nitrophenols under dynamic conditions is carried out. At the second stage, depending on the nature of the desorption solution, the eluate is evaporated (acetonitrile) or saturated with ammonium sulfate and extracted with acetone (aqueous NH₃ solution). The concentration factors are 4000 and 910, respectively. Nitrophenols are determined in concentrates by thin layer chromatography and HPLC, the limits of detection are 1.0–1.8 and 0.25–0.45 μg/L, respectively. The duration of analysis is 200 min.     

Detection and quantification of chitosan aggregates by pressure-assisted capillary zone electrophoresis

An approach to the detection and determination of chitosan aggregates in acetic acid solutions is proposed using pressure-assisted capillary zone electrophoresis. Processes of chitosan aggregation are studied depending on the composition of dispersion medium and storage time. The presence of several species of positively charged chitosan aggregates is revealed for the first time. Particle sizes in the range 20–2500 nm are determined by scanning electron microscopy and static and dynamic light scattering. The dependence of the shape of electropherograms on particle size distribution obtained under the same conditions is found. A trend to changing electrophoretic mobility depending on the size of the aggregate is observed, which enables the approximate evaluation of the polydispersity of chitosan solutions. Chitosan is used for the effective dynamic modification of capillaries, which does not require the introduction of a modifier into the background electrolyte.     

An electrochemical aptasensor for cytochrome C,based on pillar[5]arene modified with Neutral Red

An electrochemical aptasensor is developed for the highly sensitive determination of cytochrome C, using a change in the redox current of Neutral Red covalently bound to terminal carboxyl groups of decasubstituted pillar[5]arene as a signal. The inclusion of the analyte into the complex with an aptamer reduces peaks of redox current of the dye through the dissociation of electron transfer chain in the surface layer. The aptasensor enables the determination of 1 nM to 1.0 mM of cytochrome C in the presence of 1000-fold excesses of albumin, polyethylene glycol, and lysozyme as models of interfering components in biological fluids.     

Mechanism of reaction of selenium elimination in diacetophenonyl selenide under the action of reduced glutathione

Products of reaction between the organoselenium xenobiotic, diacetophenonyl selenide (1,5-diphenyl-3-selenapenta-1,5-dione), and reduced glutathione at different molar ratios and pH values were studied by HPLC and TLC. Reaction intermediates, S-(acetophenylselenyl)glutathione and glutathione selenodisulfide, and reaction products, acetophenone and hydroselenide anion, were detected. The reaction scheme proposed earlier was confirmed.