The flow of a variable viscosity fluid between parallel plates with shear heating

A model for the flow of a fluid through a channel with parallel plates is investigated. The channel is narrow, so that the lubrication approximation may be applied. The channel walls are maintained at a constant temperature. Shear heating effects are included and the fluid viscosity decreases exponentially with temperature. When the flow is driven solely by shear stress or imposed velocity at the top, analytical progress is possible. When pressure gradient also drives the flow the problem is solved numerically.     

Dynamics of molybdenum nano structure formation on the TiO2(1 1 0) surface: A kinetic Monte Carlo approach

The rutile TiO₂(1 1 0) surface is a highly anisotropic surface exhibiting “channels” delimited by oxygen rows. In previous experimental and theoretical DFT works we could identify the molybdenum adsorption sites. They are located inside the channels. Moreover, experimental studies have shown that during subsequent annealing after deposition, special molybdenum nano structures can be formed, especially two monolayer high pyramidal chains of atoms.In order to better understand the dynamics of nano structure formation, we present a kinetic Monte Carlo study on diffusion and adsorption of molybdenum atoms on a TiO₂(1 1 0) surface. A quasi one-dimensional lattice gas model has been used which describes the possible adsorption sites of a Mo atom in a single channel of the surface. The atomic positions of a 1.5 monolayer thick Mo film formed of pyramidal chains define the lattice sites of the model. Thereby the formation of three-dimensional clusters could be studied. Here we have studied the cluster formation as a function of parameters that can be controlled in a growth experiment by physical vapor deposition: deposition and annealing temperature, flux and total amount of deposited Mo. Good qualitative agreement with recent experiments is obtained.     

Deconvolution of very low primary energy SIMS depth profiles

In this paper, the deconvolution of SIMS profiles analysed at very low primary energy (0.5 keV/O₂⁺) is addressed. The depth resolution function (DRF) of the SIMS analysis in presence of roughness is established and a deconvolution procedure is implemented without or in presence of roughness on samples containing delta-doped layers of boron in silicon. It is shown that the deconvolution procedure can lead to a great improvement of the full width at half maximum (FWHM) of the measured peaks in the case where no roughness in detected in the crater bottom. In the case where it is present, the conditions required to use a deconvolution procedure are discussed, and the deconvolution is implemented using precise and restrictive assumptions.     

Au-analyte adducts resulting from single massive gold cluster impacts

Utilizing Au₄₀₀⁴⁺ primary ions produces large molecular ion yields, some in excess of unity, with minimal surface damage. A surprising observation is the occurrence of Au-analyte adducts as part of the ejecta desorbed by a single Au-cluster impact. We present data that demonstrate that Au and Au-adducts as secondary ions (e.g., AuCN⁻, AuGly⁻ and AuCsI⁻) are the result of the interaction between a single primary ion, Au₄₀₀⁴⁺ and the target atoms.     

Towards cooling of high-intensity ion beams

Buffer gas beam coolers may become excellent beam preparation devices for high-resolution mass separation. The small beam emittance provided makes efficient isobar resolution a realistic goal. In order to fulfill the needs of future facilities providing high-intensity beams of rare isotopes, it is desirable to increase the beam intensity limit of such devices from typically several tens of nanoamperes to microamperes. This requires the usage of high-voltage radiofrequencies in a low-pressure gas environment. A buffer gas beam cooler, dedicated to this purpose, is under development at the NSCL. The study of voltage breakdowns under such conditions and the design of an electrode system minimizing them is mandatory.      

A systematic elimination procedure for Ito stochastic differential equations and the adiabatic approximation

We study a class of nonlinear Ito stochastic differential equations (with possibly state dependent diffusion coefficients), in which the variables can be divided into linearly damped (slaved) variables s and linearly undamped variablesu (order parameters). We devise a systematic and constructive procedure to eliminate the slaved variables. We take explicit time and chance dependence of the slaved variables into account, the latter via a family of diffusion processesZ _t ^(v) . These act as fluctuating coefficients of the Center Manifolds _t=s(u _t, t,Z _t ^(v) (v=2, 3, ...)) and appear explicitly in the elimination procedure. We show how in the Ito calculus fluctuating and deterministic coefficients of the Center Manifold are more completely separated than in the previously treated Stratonovich case [1]. The adiabatic approximation is defined as a partial summation of the elimination expansion and the stochastic generalization ofs=0 is derived. We show how thus ambiguity of stochastic calculi is removed. Closed form summations are given in two examples. We briefly indicate the potential use of perturbation theory techniques in the systematic elimination procedure.     

New methods for determining the volumetric flow rate in the column and the retention time of the unretained substance in gas chromatography

New methods for calculating the mean volumetric flow rate of the carrier gas and the retention time of the unretained substance in the column under conditions of gas chromatography were proposed. The methods are based on preliminary isothermal calibrations of the flow rate and holdup time for a packed column. A theoretical substantiation of the methods was given. Procedures of plotting calibration dependences for determining the indicated quantities at a desired temperature were described. The calculation results were compared to experimental data obtained by traditional methods. It was demonstrated that the use of calculation methods substantially simplifies the determination of the specific retention volume over a wide temperature range.     

Generalized green operator for an impulsive boundary-value problem with switchings

We establish constructive existence conditions and construct a generalized Green operator for the construction of solutions of a Noetherian linear boundary-value problem for a system of ordinary differential equations with switchings and pulse action in critical and noncritical cases. __________ Translated from Neliniini Kolyvannya, Vol. 10, No. 1, pp. 51–65, January–March, 2007.     

Fourier–Padé Approximants for Angelesco Systems

We study linear and nonlinear simultaneous Fourier-Pade approximation for Angelesco systems of functions and give the exact rate of convergence/divergence of the approximants in terms of the solution of associated vector equilibrium potential problems which differ for the linear and nonlinear cases.     

Synthesis of high-purity α- and β-PbO and possible applications to synthesis and processing of other lead oxide materials

Litharge, the red tetragonal form of lead oxide α-PbO and massicot, the yellow orthorhombic form β-PbO, are synthesized from lead(II) salts in aqueous media at elevated temperatures. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used to characterize the size, morphology, and crystallographic structural forms of the products. The role of impurities in the experimental synthesis of the materials and microstructural variations in the final products are described. The implications of these observations regarding the synthesis of different conducting lead oxides and other related materials are discussed. PACS 71.20.Ps; 72.80.Jc; 74.62.Bf; 74.62.Dh; 75.50.Tt