Laser ablation from Lithium niobate

Received: 21 May 1997/Accepted: 4 July 1997     

Double-diaphragm shock tube at the Ioffe Physicotechnical Institute

Results of numerical calculations of the flow in a double-diaphragm shock tube with a tailored contact surface are reported. The calculations were carried out using a model of an ideal shock tube allowing for the real properties of the driver gas at high pressures and equilibrium thermodynamics of the processes behind the shock waves at Mach numbers M _s1 of the shock wave in the working gas varying in the range 5–25. Flow regimes with a tailored contact surface were obtained for Mach numbers M _s1=6.3, 11, and 15 using the double-diaphragm shock tube at the Ioffe Physicotechnical Institute. Under these conditions, the parameters of the working gas were kept constant for more than 1 ms. The calculated data were compared with the experimental results and it was shown that the calculated data may be used to determine the section lengths in a double-diaphragm shock tube and to estimate its operating time. The calculated values of the initial pressure in the sections of the tube were substantially lower than those achieved experimentally. Measurements were made of the static pressure along the axis of a conical nozzle during the expansion of hydrogen (initial temperature T ₀=293 K) and shock-heated nitrogen (T ₀=4000 K). It is found that the expansion of hydrogen is accompanied by deactivation of the rotational degrees of freedom, and that partial freezing of the vibrational degrees of freedom takes place in the nitrogen stream. Zh. Tekh. Fiz. 67, 88–95 (November 1997)     

Polar angle dependence of the longitudinal polarization of quarks produced in e+e−-annihilation

We calculate one-loop radiative QCD corrections to the three polarized and unpolarized structure functions that determine the beam-quark polar angle dependence of the longitudinal polarization of light and heavy quarks produced in e⁺e^?-annihilations. We present analytical and numerical results for the longitudinal polarization and its polar angle dependence. We discuss in some detail the zero-mass limit of our results and the role of the anomalous spin-flip contributions to the polarization observables in the zero-mass limit. Our discussion includes transverse and longitudinal beam polarization effects.     

Interaction of soliton-like light beamsin second-order non-linear materials

We investigate numerically the interaction between two light beams, initially monochromatic, during the excitation of solitary waves in quadratically non-linear media. We show that the result of the interaction is strongly dependent on soliton oscillations occurring during excitation, generating a new class of threshold phenomena.     

Observation of self-generation of dark envelope solitons for spin waves in ferromagnetic films

We have performed experiments in which self-generation of dark envelope solitons for spin waves at microwave frequencies were obtained. Stable self-generation of dark solitons was observed in a ring consisting of tangentially magnetized yttrium iron garnet film and a microwave signal amplifier. Pis’ma Zh. éksp. Teor. Fiz. 68, No. 3, 229–233 (10 August 1998)     

Polymorphism of biperiodic stripe domain structures

Magnetic-field-induced polymorphism of biperiodic stripe domain structures of films with a positive anisotropy constant and easy axis parallel to the normal to the surface is studied. A symmetry classification of the observed types of domain structures is performed, and the phase diagram of the films in the (H _⊥, H _∥) plane, where H _⊥ and H _∥ are, respectively, the components of the magnetic field vector perpendicular and parallel to the normal to the surface, is determined. Pis’ma Zh. éksp. Teor. Fiz. 67, No. 9, 701–706 (10 May 1998)     

Low noise optical receiver with multi-octave bandwidth

Optical and Quantum Electronics - A new approach for the design and construction of low noise broadband optical receivers is presented utilizing distributed amplification based on hybrid integrated...     

Second-approximation shear theory for shallow layered shells and plates

Analysis of a second-approximation refined shear model for shallow layered composite shells and plates with a substantially inhomogeneous structure over the thickness is presented. The tangential displacements and corresponding normal stresses are expressed in the form of a polynomial of the fith degree in the transverse coordinate and contain squared rigidity characteristics. In this way, the accuracy of results and practical coincidence with the 3D solutions is ensured. Based on the refined model, a theory of shallow layered shells is developed. A system of resolving equations of sixteenth power together with appropriate boundary conditions was obtained and solved analytically. It is shown that the area of application of the formed model is extended as compared with the model of the first approximation. The model proposed allows us to examine the stress-strain state of layered composite structures of substantially different thickness and physical-mechanical characteristics of the layers, including the possibility of simulating relatively large shear deformations of rigid layers separated by a low-modulus thin interlayer pliable to transverse shear.Presented at the 10th International Conference on the Mechanics of Composite Materials (Riga, April 20–23, 1998).Ukrainian Transport University, Kiev, Ukraine. Translated from Mekhanika Kompozitnykh Materialov, Vol. 34, No. 3, pp. 363–370, May–June, 1998.     

Asymptotic behavior of neutron small-angle multiple scattering spectra

The asymptotic behavior of the spectra for large values of the scattering vector for the case of elastic multiple small-angle neutron scattering (SANS) is investigated theoretically and experimentally. An expansion of the spectrum in terms of the reciprocal of the magnitude of the momentum transfer is obtained taking account of the influence of the instrumental line. It is shown that, to within some factor, the leading term of the expansion is identical to the differential single-scattering cross section averaged over a statistical ensemble of particles; several subsequent terms in the expansion are calculated and the range of applicability of the resulting expressions is determined. The asymptotic behavior of the multiple SANS spectrum is measured, using a two-crystal neutron spectrometer, for samples of an HTSC ceramic, the alloy Fe-Ni, and Al powder. The agreement between the experimental results and the theoretical predictions is analyzed. Zh. éksp. Teor. Fiz. 114, 2194–2203 (December 1998)